diff mbox series

kbuild: use always-y instead of extra-y

Message ID 20210120062351.3011786-1-masahiroy@kernel.org
State Accepted
Commit 2047ace96679a146c8573520a080f9dfa06a2c98
Headers show
Series kbuild: use always-y instead of extra-y | expand

Commit Message

Masahiro Yamada Jan. 20, 2021, 6:23 a.m. UTC
As commit d0e628cd817f ("kbuild: doc: clarify the difference between
extra-y and always-y") explained, extra-y should be used for listing
the prerequsites of vmlinux. always-y is a better fix here.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---

 Documentation/devicetree/bindings/Makefile |  8 ++++----
 drivers/gpu/drm/i915/Makefile              |  2 +-
 scripts/Makefile.lib                       | 10 +++++-----
 scripts/gdb/linux/Makefile                 |  2 +-
 4 files changed, 11 insertions(+), 11 deletions(-)

Comments

Rob Herring Jan. 20, 2021, 9:39 p.m. UTC | #1
On Wed, Jan 20, 2021 at 03:23:51PM +0900, Masahiro Yamada wrote:
> As commit d0e628cd817f ("kbuild: doc: clarify the difference between
> extra-y and always-y") explained, extra-y should be used for listing
> the prerequsites of vmlinux. always-y is a better fix here.

prerequisites

Glad to see this clarified. I think just tried both and picked one.

Reviewed-by: Rob Herring <robh@kernel.org>
> 
> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
> ---
> 
>  Documentation/devicetree/bindings/Makefile |  8 ++++----
>  drivers/gpu/drm/i915/Makefile              |  2 +-
>  scripts/Makefile.lib                       | 10 +++++-----
>  scripts/gdb/linux/Makefile                 |  2 +-
>  4 files changed, 11 insertions(+), 11 deletions(-)
Masahiro Yamada Jan. 26, 2021, 6:35 p.m. UTC | #2
On Thu, Jan 21, 2021 at 6:39 AM Rob Herring <robh@kernel.org> wrote:
>
> On Wed, Jan 20, 2021 at 03:23:51PM +0900, Masahiro Yamada wrote:
> > As commit d0e628cd817f ("kbuild: doc: clarify the difference between
> > extra-y and always-y") explained, extra-y should be used for listing
> > the prerequsites of vmlinux. always-y is a better fix here.
>
> prerequisites

Thanks.

I fixed it up, and applied to linux-kbuild.



> Glad to see this clarified. I think just tried both and picked one.
>
> Reviewed-by: Rob Herring <robh@kernel.org>
> >
> > Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
> > ---
> >
> >  Documentation/devicetree/bindings/Makefile |  8 ++++----
> >  drivers/gpu/drm/i915/Makefile              |  2 +-
> >  scripts/Makefile.lib                       | 10 +++++-----
> >  scripts/gdb/linux/Makefile                 |  2 +-
> >  4 files changed, 11 insertions(+), 11 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile
index 8f2b054bec5a..90fcad98984d 100644
--- a/Documentation/devicetree/bindings/Makefile
+++ b/Documentation/devicetree/bindings/Makefile
@@ -78,10 +78,10 @@  $(obj)/processed-schema.json: $(DT_SCHEMA_FILES) check_dtschema_version FORCE
 
 endif
 
-extra-$(CHECK_DT_BINDING) += processed-schema-examples.json
-extra-$(CHECK_DTBS) += processed-schema.json
-extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES))
-extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dt.yaml, $(DT_SCHEMA_FILES))
+always-$(CHECK_DT_BINDING) += processed-schema-examples.json
+always-$(CHECK_DTBS)       += processed-schema.json
+always-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES))
+always-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dt.yaml, $(DT_SCHEMA_FILES))
 
 # Hack: avoid 'Argument list too long' error for 'make clean'. Remove most of
 # build artifacts here before they are processed by scripts/Makefile.clean
diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 6d9e81ea67f4..938221894d0c 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -294,7 +294,7 @@  no-header-test := \
 	gvt/mpt.h \
 	gvt/scheduler.h
 
-extra-$(CONFIG_DRM_I915_WERROR) += \
+always-$(CONFIG_DRM_I915_WERROR) += \
 	$(patsubst %.h,%.hdrtest, $(filter-out $(no-header-test), \
 		$(shell cd $(srctree)/$(src) && find * -name '*.h')))
 
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 4612a887f28e..b8e587a17dcc 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -64,12 +64,12 @@  always-y += $(userprogs-always-y) $(userprogs-always-m)
 
 # DTB
 # If CONFIG_OF_ALL_DTBS is enabled, all DT blobs are built
-extra-y				+= $(dtb-y)
-extra-$(CONFIG_OF_ALL_DTBS)	+= $(dtb-)
+always-y			+= $(dtb-y)
+always-$(CONFIG_OF_ALL_DTBS)	+= $(dtb-)
 
 ifneq ($(CHECK_DTBS),)
-extra-y += $(patsubst %.dtb,%.dt.yaml, $(dtb-y))
-extra-$(CONFIG_OF_ALL_DTBS) += $(patsubst %.dtb,%.dt.yaml, $(dtb-))
+always-y += $(patsubst %.dtb,%.dt.yaml, $(dtb-y))
+always-$(CONFIG_OF_ALL_DTBS) += $(patsubst %.dtb,%.dt.yaml, $(dtb-))
 endif
 
 # Add subdir path
@@ -230,7 +230,7 @@  $(obj)/%: $(src)/%_shipped
 #	target: source(s) FORCE
 #		$(if_changed,ld/objcopy/gzip)
 #
-#	and add target to extra-y so that we know we have to
+#	and add target to 'targets' so that we know we have to
 #	read in the saved command line
 
 # Linking
diff --git a/scripts/gdb/linux/Makefile b/scripts/gdb/linux/Makefile
index 124755087510..13903073cbff 100644
--- a/scripts/gdb/linux/Makefile
+++ b/scripts/gdb/linux/Makefile
@@ -18,7 +18,7 @@  quiet_cmd_gen_constants_py = GEN     $@
 	$(CPP) -E -x c -P $(c_flags) $< > $@ ;\
 	sed -i '1,/<!-- end-c-headers -->/d;' $@
 
-extra-y += constants.py
+always-y += constants.py
 $(obj)/constants.py: $(src)/constants.py.in FORCE
 	$(call if_changed_dep,gen_constants_py)