diff mbox series

[v7,02/14] clk: tegra: Don't enable PLLE HW sequencer at init

Message ID 20210120073414.69208-3-jckuo@nvidia.com
State New
Headers show
Series Tegra XHCI controller ELPG support | expand

Commit Message

JC Kuo Jan. 20, 2021, 7:34 a.m. UTC
PLLE hardware power sequencer references PEX/SATA UPHY PLL hardware
power sequencers' output to enable/disable PLLE. PLLE hardware power
sequencer has to be enabled only after PEX/SATA UPHY PLL's sequencers
are enabled.

Signed-off-by: JC Kuo <jckuo@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
---
v7:
   no change
v6:
   no change
v5:
   no change
v4:
   no change 
v3:
   no change

 drivers/clk/tegra/clk-pll.c | 12 ------------
 1 file changed, 12 deletions(-)

Comments

Stephen Boyd Feb. 8, 2021, 7:28 p.m. UTC | #1
Quoting JC Kuo (2021-01-19 23:34:02)
> PLLE hardware power sequencer references PEX/SATA UPHY PLL hardware
> power sequencers' output to enable/disable PLLE. PLLE hardware power
> sequencer has to be enabled only after PEX/SATA UPHY PLL's sequencers
> are enabled.
> 
> Signed-off-by: JC Kuo <jckuo@nvidia.com>
> Acked-by: Thierry Reding <treding@nvidia.com>
> ---

Acked-by: Stephen Boyd <sboyd@kernel.org>
diff mbox series

Patch

diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index c5cc0a2dac6f..0193cebe8c5a 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -2515,18 +2515,6 @@  static int clk_plle_tegra210_enable(struct clk_hw *hw)
 	pll_writel(val, PLLE_SS_CTRL, pll);
 	udelay(1);
 
-	val = pll_readl_misc(pll);
-	val &= ~PLLE_MISC_IDDQ_SW_CTRL;
-	pll_writel_misc(val, pll);
-
-	val = pll_readl(pll->params->aux_reg, pll);
-	val |= (PLLE_AUX_USE_LOCKDET | PLLE_AUX_SS_SEQ_INCLUDE);
-	val &= ~(PLLE_AUX_ENABLE_SWCTL | PLLE_AUX_SS_SWCTL);
-	pll_writel(val, pll->params->aux_reg, pll);
-	udelay(1);
-	val |= PLLE_AUX_SEQ_ENABLE;
-	pll_writel(val, pll->params->aux_reg, pll);
-
 out:
 	if (pll->lock)
 		spin_unlock_irqrestore(pll->lock, flags);