diff mbox series

[net-next,11/15] bnxt_en: Add a new BNXT_STATE_NAPI_DISABLED flag to keep track of NAPI state.

Message ID 1611558501-11022-12-git-send-email-michael.chan@broadcom.com
State New
Headers show
Series bnxt_en: Error recovery improvements. | expand

Commit Message

Michael Chan Jan. 25, 2021, 7:08 a.m. UTC 
Up until now, we don't need to keep track of this state because NAPI
is always enabled once and disabled once during bring up and shutdown.
For better error recovery in subsequent patches, we want to quiesce
the device earlier during fatal error conditions.  The normal shutdown
sequence will disable NAPI again and the flag will prevent disabling
NAPI twice.

Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 4 +++-
 drivers/net/ethernet/broadcom/bnxt/bnxt.h | 1 +
 2 files changed, 4 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 98caac9fbdee..83846b50042a 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -8836,7 +8836,8 @@  static void bnxt_disable_napi(struct bnxt *bp)
 {
 	int i;
 
-	if (!bp->bnapi)
+	if (!bp->bnapi ||
+	    test_and_set_bit(BNXT_STATE_NAPI_DISABLED, &bp->state))
 		return;
 
 	for (i = 0; i < bp->cp_nr_rings; i++) {
@@ -8853,6 +8854,7 @@  static void bnxt_enable_napi(struct bnxt *bp)
 {
 	int i;
 
+	clear_bit(BNXT_STATE_NAPI_DISABLED, &bp->state);
 	for (i = 0; i < bp->cp_nr_rings; i++) {
 		struct bnxt_napi *bnapi = bp->bnapi[i];
 		struct bnxt_cp_ring_info *cpr;
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
index bd36f00ef28c..4ef6888acdc6 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -1809,6 +1809,7 @@  struct bnxt {
 #define BNXT_STATE_FW_FATAL_COND	6
 #define BNXT_STATE_DRV_REGISTERED	7
 #define BNXT_STATE_PCI_CHANNEL_IO_FROZEN	8
+#define BNXT_STATE_NAPI_DISABLED	9
 
 #define BNXT_NO_FW_ACCESS(bp)					\
 	(test_bit(BNXT_STATE_FW_FATAL_COND, &(bp)->state) ||	\