@@ -60,6 +60,10 @@
#ifdef FIO_HAVE_SGIO
+#ifndef SGV4_FLAG_HIPRI
+#define SGV4_FLAG_HIPRI 0x800
+#endif
+
enum {
FIO_SG_WRITE = 1,
FIO_SG_WRITE_VERIFY = 2,
@@ -68,12 +72,22 @@ enum {
struct sg_options {
void *pad;
+ unsigned int hipri;
unsigned int readfua;
unsigned int writefua;
unsigned int write_mode;
};
static struct fio_option options[] = {
+ {
+ .name = "hipri",
+ .lname = "High Priority",
+ .type = FIO_OPT_STR_SET,
+ .off1 = offsetof(struct sg_options, hipri),
+ .help = "Use polled IO completions",
+ .category = FIO_OPT_C_ENGINE,
+ .group = FIO_OPT_G_SG,
+ },
{
.name = "readfua",
.lname = "sg engine read fua flag support",
@@ -527,6 +541,8 @@ static int fio_sgio_prep(struct thread_data *td, struct io_u *io_u)
else
hdr->cmdp[0] = 0x88; // read(16)
+ if (o->hipri)
+ hdr->flags |= SGV4_FLAG_HIPRI;
if (o->readfua)
hdr->cmdp[1] |= 0x08;
@@ -542,6 +558,8 @@ static int fio_sgio_prep(struct thread_data *td, struct io_u *io_u)
hdr->cmdp[0] = 0x2a; // write(10)
else
hdr->cmdp[0] = 0x8a; // write(16)
+ if (o->hipri)
+ hdr->flags |= SGV4_FLAG_HIPRI;
if (o->writefua)
hdr->cmdp[1] |= 0x08;
break;
@@ -865,6 +883,7 @@ static int fio_sgio_init(struct thread_data *td)
{
struct sgio_data *sd;
struct sgio_trim *st;
+ struct sg_io_hdr *h3p;
int i;
sd = calloc(1, sizeof(*sd));
@@ -880,12 +899,13 @@ static int fio_sgio_init(struct thread_data *td)
#ifdef FIO_SGIO_DEBUG
sd->trim_queue_map = calloc(td->o.iodepth, sizeof(int));
#endif
- for (i = 0; i < td->o.iodepth; i++) {
+ for (i = 0, h3p = sd->sgbuf; i < td->o.iodepth; i++, ++h3p) {
sd->trim_queues[i] = calloc(1, sizeof(struct sgio_trim));
st = sd->trim_queues[i];
st->unmap_param = calloc(td->o.iodepth + 1, sizeof(char[16]));
st->unmap_range_count = 0;
st->trim_io_us = calloc(td->o.iodepth, sizeof(struct io_u *));
+ h3p->interface_id = 'S';
}
td->io_ops_data = sd;
Adds hipri option to the Linux sg driver engine. This turns on the SGV4_FLAG_HIPRI flag in recent sg drivers (January 2021) on READ and WRITE commands (and not on UNMAP (trim), VERIFY, etc). Uses blk_poll() and the mq_poll() callback in SCSI LLDs. The mechanism is also called "iopoll". The Linux sg engine in fio uses the struct sg_io_hdr based interface known as the sg driver "v3" interface. Linux sg drivers in the kernel prior to January 2021 (sg version 4.0.12) will just ignore the SGV4_FLAG_HIPRI flag and do normal completions where LLDs indicate command completion with a (software) interrupt or similar mechanism. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> --- engines/sg.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-)