diff mbox series

[1/3] phy: qcom-qusb2: add QUSB2 support for IPQ6018

Message ID b8c22dddf1f70d89e135fe1ae705ddc68e295ebb.1611756920.git.baruch@tkos.co.il
State New
Headers show
Series [1/3] phy: qcom-qusb2: add QUSB2 support for IPQ6018 | expand

Commit Message

Baruch Siach Jan. 27, 2021, 2:20 p.m. UTC 
From: Kathiravan T <kathirav@codeaurora.org>

Add the phy init sequence for the Super Speed ports found
on IPQ6018.

Signed-off-by: Kathiravan T <kathirav@codeaurora.org>
[baruch: add ipq6018_regs_layout[], drop binding change]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
---
 drivers/phy/qualcomm/phy-qcom-qusb2.c | 44 +++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index 719e0888ed87..8f1bf7e2186b 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -22,6 +22,7 @@ 
 
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
 
+#define QUSB2PHY_PLL			0x0
 #define QUSB2PHY_PLL_TEST		0x04
 #define CLK_REF_SEL			BIT(7)
 
@@ -135,6 +136,35 @@  enum qusb2phy_reg_layout {
 	QUSB2PHY_INTR_CTRL,
 };
 
+static const struct qusb2_phy_init_tbl ipq6018_init_tbl[] = {
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL, 0x14),
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xF8),
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0xB3),
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0x83),
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0xC0),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL2, 0x21),
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE5, 0x00),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00),
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TEST2, 0x14),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TEST, 0x80),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9F),
+};
+
+static const unsigned int ipq6018_regs_layout[] = {
+	[QUSB2PHY_PLL_STATUS]              = 0x38,
+	[QUSB2PHY_PORT_TUNE1]              = 0x80,
+	[QUSB2PHY_PORT_TUNE2]              = 0x84,
+	[QUSB2PHY_PORT_TUNE3]              = 0x88,
+	[QUSB2PHY_PORT_TUNE4]              = 0x8C,
+	[QUSB2PHY_PORT_TUNE5]              = 0x90,
+	[QUSB2PHY_PORT_TEST1]              = 0x98,
+	[QUSB2PHY_PORT_TEST2]              = 0x9C,
+	[QUSB2PHY_PORT_POWERDOWN]          = 0xB4,
+	[QUSB2PHY_INTR_CTRL]               = 0xBC,
+};
+
 static const unsigned int msm8996_regs_layout[] = {
 	[QUSB2PHY_PLL_STATUS]		= 0x38,
 	[QUSB2PHY_PORT_TUNE1]		= 0x80,
@@ -275,6 +305,17 @@  static const struct qusb2_phy_cfg msm8998_phy_cfg = {
 	.update_tune1_with_efuse = true,
 };
 
+static const struct qusb2_phy_cfg ipq6018_phy_cfg = {
+	.tbl            = ipq6018_init_tbl,
+	.tbl_num        = ARRAY_SIZE(ipq6018_init_tbl),
+	.regs           = ipq6018_regs_layout,
+
+	.disable_ctrl   = POWER_DOWN,
+	.mask_core_ready = PLL_LOCKED,
+	/* autoresume not used */
+	.autoresume_en   = BIT(0),
+};
+
 static const struct qusb2_phy_cfg qusb2_v2_phy_cfg = {
 	.tbl		= qusb2_v2_init_tbl,
 	.tbl_num	= ARRAY_SIZE(qusb2_v2_init_tbl),
@@ -833,6 +874,9 @@  static const struct phy_ops qusb2_phy_gen_ops = {
 
 static const struct of_device_id qusb2_phy_of_match_table[] = {
 	{
+		.compatible	= "qcom,ipq6018-qusb2-phy",
+		.data		= &ipq6018_phy_cfg,
+	}, {
 		.compatible	= "qcom,ipq8074-qusb2-phy",
 		.data		= &msm8996_phy_cfg,
 	}, {