@@ -7,5 +7,6 @@ obj-y += domain.o
obj-y += vfp.o
obj-y += smpboot.o
obj-y += domctl.o
+obj-y += cache.o
obj-$(EARLY_PRINTK) += debug.o
new file mode 100644
@@ -0,0 +1,100 @@
+/*
+ * Cache maintenance
+ *
+ * Copyright (C) 2001 Deep Blue Solutions Ltd.
+ * Copyright (C) 2012 ARM Ltd.
+ * Copyright (C) 1996-2000 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * Enable and disable interrupts.
+ */
+ .macro disable_irq
+ msr daifset, #2
+ .endm
+
+ .macro enable_irq
+ msr daifclr, #2
+ .endm
+
+/*
+ * Save/disable and restore interrupts.
+ */
+ .macro save_and_disable_irqs, olddaif
+ mrs \olddaif, daif
+ disable_irq
+ .endm
+
+ .macro restore_irqs, olddaif
+ msr daif, \olddaif
+ .endm
+
+/*
+ * __flush_dcache_all()
+ *
+ * Flush the whole D-cache.
+ *
+ * Corrupted registers: x0-x7, x9-x11
+ */
+ ENTRY(__flush_dcache_all)
+__flush_dcache_all:
+ dmb sy // ensure ordering with previous memory accesses
+ mrs x0, clidr_el1 // read clidr
+ and x3, x0, #0x7000000 // extract loc from clidr
+ lsr x3, x3, #23 // left align loc bit field
+ cbz x3, finished // if loc is 0, then no need to clean
+ mov x10, #0 // start clean at cache level 0
+loop1:
+ add x2, x10, x10, lsr #1 // work out 3x current cache level
+ lsr x1, x0, x2 // extract cache type bits from clidr
+ and x1, x1, #7 // mask of the bits for current cache only
+ cmp x1, #2 // see what cache we have at this level
+ b.lt skip // skip if no cache, or just i-cache
+ save_and_disable_irqs x9 // make CSSELR and CCSIDR access atomic
+ msr csselr_el1, x10 // select current cache level in csselr
+ isb // isb to sych the new cssr&csidr
+ mrs x1, ccsidr_el1 // read the new ccsidr
+ restore_irqs x9
+ and x2, x1, #7 // extract the length of the cache lines
+ add x2, x2, #4 // add 4 (line length offset)
+ mov x4, #0x3ff
+ and x4, x4, x1, lsr #3 // find maximum number on the way size
+ clz w5, w4 // find bit position of way size increment
+ mov x7, #0x7fff
+ and x7, x7, x1, lsr #13 // extract max number of the index size
+loop2:
+ mov x9, x4 // create working copy of max way size
+loop3:
+ lsl x6, x9, x5
+ orr x11, x10, x6 // factor way and cache number into x11
+ lsl x6, x7, x2
+ orr x11, x11, x6 // factor index number into x11
+ dc cisw, x11 // clean & invalidate by set/way
+ subs x9, x9, #1 // decrement the way
+ b.ge loop3
+ subs x7, x7, #1 // decrement the index
+ b.ge loop2
+skip:
+ add x10, x10, #2 // increment cache number
+ cmp x3, x10
+ b.gt loop1
+finished:
+ mov x10, #0 // swith back to cache level 0
+ msr csselr_el1, x10 // select current cache level in csselr
+ dsb sy
+ isb
+ ret
+ENDPROC(__flush_dcache_all)
__flush_dcache_all added from arch/arm64/mm/cache.S, with helper macros from arch/arm64/include/asm/assembler.h, from v3.16. The cache flushing is required when transitioning from EFI code that runs with cache enable to Xen startup code which expects the cache to be disabled. Signed-off-by: Roy Franz <roy.franz@linaro.org> --- xen/arch/arm/arm64/Makefile | 1 + xen/arch/arm/arm64/cache.S | 100 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 101 insertions(+) create mode 100644 xen/arch/arm/arm64/cache.S