diff mbox series

[net-next,08/12] can: mcp251xfd: mcp251xfd_tx_obj_from_skb(): clean up padding of CAN-FD frames

Message ID 20210127092227.2775573-9-mkl@pengutronix.de
State New
Headers show
Series [net-next,01/12] can: gw: fix typo | expand

Commit Message

Marc Kleine-Budde Jan. 27, 2021, 9:22 a.m. UTC 
CAN-FD frames have only specific frame length (0, 1, 2, 3, 4, 5, 6, 7, 8, 12,
16, 20, 24, 32, 48, 64). A CAN-FD frame provided by user space might not cover
the whole CAN-FD frame. To avoid sending garbage over the CAN bus the driver
pads the CAN frame with 0x0 (if MCP251XFD_SANITIZE_CAN is activated).

This patch cleans up the pad len calculation. Rounding to full u32 brings no
benefit, in case of CRC transfers, the hw_tx_obj->data is not aligned to u32
anyway.

Link: https://lore.kernel.org/r/20210114153448.1506901-3-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
index 1dbb87c28049..aa992e71d787 100644
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
@@ -2303,7 +2303,7 @@  mcp251xfd_tx_obj_from_skb(const struct mcp251xfd_priv *priv,
 	union mcp251xfd_tx_obj_load_buf *load_buf;
 	u8 dlc;
 	u32 id, flags;
-	int offset, len;
+	int pad_len, len;
 
 	if (cfd->can_id & CAN_EFF_FLAG) {
 		u32 sid, eid;
@@ -2351,13 +2351,14 @@  mcp251xfd_tx_obj_from_skb(const struct mcp251xfd_priv *priv,
 	put_unaligned_le32(id, &hw_tx_obj->id);
 	put_unaligned_le32(flags, &hw_tx_obj->flags);
 
-	/* Clear data at end of CAN frame */
-	offset = round_down(cfd->len, sizeof(u32));
-	len = round_up(can_fd_dlc2len(dlc), sizeof(u32)) - offset;
-	if (MCP251XFD_SANITIZE_CAN && len)
-		memset(hw_tx_obj->data + offset, 0x0, len);
+	/* Copy data */
 	memcpy(hw_tx_obj->data, cfd->data, cfd->len);
 
+	/* Clear unused data at end of CAN frame */
+	pad_len = can_fd_dlc2len(dlc) - cfd->len;
+	if (MCP251XFD_SANITIZE_CAN && pad_len)
+		memset(hw_tx_obj->data + cfd->len, 0x0, pad_len);
+
 	/* Number of bytes to be written into the RAM of the controller */
 	len = sizeof(hw_tx_obj->id) + sizeof(hw_tx_obj->flags);
 	if (MCP251XFD_SANITIZE_CAN)