diff mbox series

[v1,2/2] cpufreq: ACPI: Update arch scale-invariance max perf ratio if CPPC is not there

Message ID 9510730.kuOQ4KzHjt@kreacher
State New
Headers show
Series cpufreq: ACPI: Address performance regression related to scale-invariance | expand

Commit Message

Rafael J. Wysocki Feb. 4, 2021, 5:34 p.m. UTC
From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

If the maximum performance level taken for computing the
arch_max_freq_ratio value used in the x86 scale-invariance code is
higher than the one corresponding to the cpuinfo.max_freq value
coming from the acpi_cpufreq driver, the scale-invariant utilization
falls below 100% even if the CPU runs at cpuinfo.max_freq or slightly
faster, which causes the schedutil governor to select a frequency
below cpuinfo.max_freq.  That frequency corresponds to a frequency
table entry below the maximum performance level necessary to get to
the "boost" range of CPU frequencies which prevents "boost"
frequencies from being used in some workloads.

While this issue is related to scale-invariance, it may be amplified
by commit db865272d9c4 ("cpufreq: Avoid configuring old governors as
default with intel_pstate") from the 5.10 development cycle which
made it extremely easy to default to schedutil even if the preferred
driver is acpi_cpufreq as long as intel_pstate is built too, because
the mere presence of the latter effectively removes the ondemand
governor from the defaults.  Distro kernels are likely to include
both intel_pstate and acpi_cpufreq on x86, so their users who cannot
use intel_pstate or choose to use acpi_cpufreq may easily be
affectecd by this issue.

If CPPC is available, it can be used to address this issue by
extending the frequency tables created by acpi_cpufreq to cover the
entire available frequency range (including "boost" frequencies) for
each CPU, but if CPPC is not there, acpi_cpufreq has no idea what
the maximum "boost" frequency is and the frequency tables created by
it cannot be extended in a meaningful way, so in that case make it
ask the arch scale-invariance code to to use the "nominal" performance
level for CPU utilization scaling in order to avoid the issue at hand.

Fixes: db865272d9c4 ("cpufreq: Avoid configuring old governors as default with intel_pstate")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
 arch/x86/kernel/smpboot.c      |    1 +
 drivers/cpufreq/acpi-cpufreq.c |    8 ++++++++
 2 files changed, 9 insertions(+)

Comments

Giovanni Gherdovich Feb. 5, 2021, 7:07 a.m. UTC | #1
On Thu, 2021-02-04 at 18:34 +0100, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> 
> If the maximum performance level taken for computing the
> arch_max_freq_ratio value used in the x86 scale-invariance code is
> higher than the one corresponding to the cpuinfo.max_freq value
> coming from the acpi_cpufreq driver, the scale-invariant utilization
> falls below 100% even if the CPU runs at cpuinfo.max_freq or slightly
> faster, which causes the schedutil governor to select a frequency
> below cpuinfo.max_freq.  That frequency corresponds to a frequency
> table entry below the maximum performance level necessary to get to
> the "boost" range of CPU frequencies which prevents "boost"
> frequencies from being used in some workloads.
> 
> While this issue is related to scale-invariance, it may be amplified
> by commit db865272d9c4 ("cpufreq: Avoid configuring old governors as
> default with intel_pstate") from the 5.10 development cycle which
> made it extremely easy to default to schedutil even if the preferred
> driver is acpi_cpufreq as long as intel_pstate is built too, because
> the mere presence of the latter effectively removes the ondemand
> governor from the defaults.  Distro kernels are likely to include
> both intel_pstate and acpi_cpufreq on x86, so their users who cannot
> use intel_pstate or choose to use acpi_cpufreq may easily be
> affectecd by this issue.
> 
> If CPPC is available, it can be used to address this issue by
> extending the frequency tables created by acpi_cpufreq to cover the
> entire available frequency range (including "boost" frequencies) for
> each CPU, but if CPPC is not there, acpi_cpufreq has no idea what
> the maximum "boost" frequency is and the frequency tables created by
> it cannot be extended in a meaningful way, so in that case make it
> ask the arch scale-invariance code to to use the "nominal" performance
> level for CPU utilization scaling in order to avoid the issue at hand.
> 
> Fixes: db865272d9c4 ("cpufreq: Avoid configuring old governors as default with intel_pstate")
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> ---
>  arch/x86/kernel/smpboot.c      |    1 +
>  drivers/cpufreq/acpi-cpufreq.c |    8 ++++++++
>  2 files changed, 9 insertions(+)
> 
> Index: linux-pm/drivers/cpufreq/acpi-cpufreq.c
> ===================================================================
> --- linux-pm.orig/drivers/cpufreq/acpi-cpufreq.c
> +++ linux-pm/drivers/cpufreq/acpi-cpufreq.c
> @@ -806,6 +806,14 @@ static int acpi_cpufreq_cpu_init(struct
>  		state_count++;
>  		valid_states++;
>  		data->first_perf_state = valid_states;
> +	} else {
> +		/*
> +		 * If the maximum "boost" frequency is unknown, ask the arch
> +		 * scale-invariance code to use the "nominal" performance for
> +		 * CPU utilization scaling so as to prevent the schedutil
> +		 * governor from selecting inadequate CPU frequencies.
> +		 */
> +		arch_set_max_freq_ratio(true);
>  	}
>  
>  	freq_table = kcalloc(state_count, sizeof(*freq_table), GFP_KERNEL);
> Index: linux-pm/arch/x86/kernel/smpboot.c
> ===================================================================
> --- linux-pm.orig/arch/x86/kernel/smpboot.c
> +++ linux-pm/arch/x86/kernel/smpboot.c
> @@ -1833,6 +1833,7 @@ void arch_set_max_freq_ratio(bool turbo_
>  	arch_max_freq_ratio = turbo_disabled ? SCHED_CAPACITY_SCALE :
>  					arch_turbo_freq_ratio;
>  }
> +EXPORT_SYMBOL_GPL(arch_set_max_freq_ratio);
>  
>  static bool turbo_disabled(void)
>  {

Reviewed-by: Giovanni Gherdovich <ggherdovich@suse.cz>

Thanks,
Giovanni
Peter Zijlstra Feb. 5, 2021, 11:56 a.m. UTC | #2
On Thu, Feb 04, 2021 at 06:34:32PM +0100, Rafael J. Wysocki wrote:

>  arch/x86/kernel/smpboot.c      |    1 +

>  drivers/cpufreq/acpi-cpufreq.c |    8 ++++++++

>  2 files changed, 9 insertions(+)

> 

> Index: linux-pm/drivers/cpufreq/acpi-cpufreq.c

> ===================================================================

> --- linux-pm.orig/drivers/cpufreq/acpi-cpufreq.c

> +++ linux-pm/drivers/cpufreq/acpi-cpufreq.c

> @@ -806,6 +806,14 @@ static int acpi_cpufreq_cpu_init(struct

>  		state_count++;

>  		valid_states++;

>  		data->first_perf_state = valid_states;

> +	} else {

> +		/*

> +		 * If the maximum "boost" frequency is unknown, ask the arch

> +		 * scale-invariance code to use the "nominal" performance for

> +		 * CPU utilization scaling so as to prevent the schedutil

> +		 * governor from selecting inadequate CPU frequencies.

> +		 */

> +		arch_set_max_freq_ratio(true);

>  	}

>  

>  	freq_table = kcalloc(state_count, sizeof(*freq_table), GFP_KERNEL);

> Index: linux-pm/arch/x86/kernel/smpboot.c

> ===================================================================

> --- linux-pm.orig/arch/x86/kernel/smpboot.c

> +++ linux-pm/arch/x86/kernel/smpboot.c

> @@ -1833,6 +1833,7 @@ void arch_set_max_freq_ratio(bool turbo_

>  	arch_max_freq_ratio = turbo_disabled ? SCHED_CAPACITY_SCALE :

>  					arch_turbo_freq_ratio;

>  }

> +EXPORT_SYMBOL_GPL(arch_set_max_freq_ratio);


Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Rafael J. Wysocki Feb. 5, 2021, 12:23 p.m. UTC | #3
On Fri, Feb 5, 2021 at 12:59 PM Peter Zijlstra <peterz@infradead.org> wrote:
>

> On Thu, Feb 04, 2021 at 06:34:32PM +0100, Rafael J. Wysocki wrote:

>

> >  arch/x86/kernel/smpboot.c      |    1 +

> >  drivers/cpufreq/acpi-cpufreq.c |    8 ++++++++

> >  2 files changed, 9 insertions(+)

> >

> > Index: linux-pm/drivers/cpufreq/acpi-cpufreq.c

> > ===================================================================

> > --- linux-pm.orig/drivers/cpufreq/acpi-cpufreq.c

> > +++ linux-pm/drivers/cpufreq/acpi-cpufreq.c

> > @@ -806,6 +806,14 @@ static int acpi_cpufreq_cpu_init(struct

> >               state_count++;

> >               valid_states++;

> >               data->first_perf_state = valid_states;

> > +     } else {

> > +             /*

> > +              * If the maximum "boost" frequency is unknown, ask the arch

> > +              * scale-invariance code to use the "nominal" performance for

> > +              * CPU utilization scaling so as to prevent the schedutil

> > +              * governor from selecting inadequate CPU frequencies.

> > +              */

> > +             arch_set_max_freq_ratio(true);

> >       }

> >

> >       freq_table = kcalloc(state_count, sizeof(*freq_table), GFP_KERNEL);

> > Index: linux-pm/arch/x86/kernel/smpboot.c

> > ===================================================================

> > --- linux-pm.orig/arch/x86/kernel/smpboot.c

> > +++ linux-pm/arch/x86/kernel/smpboot.c

> > @@ -1833,6 +1833,7 @@ void arch_set_max_freq_ratio(bool turbo_

> >       arch_max_freq_ratio = turbo_disabled ? SCHED_CAPACITY_SCALE :

> >                                       arch_turbo_freq_ratio;

> >  }

> > +EXPORT_SYMBOL_GPL(arch_set_max_freq_ratio);

>

> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>


Thanks, I'm queuing up this lot for a post-rc7 late push.
diff mbox series

Patch

Index: linux-pm/drivers/cpufreq/acpi-cpufreq.c
===================================================================
--- linux-pm.orig/drivers/cpufreq/acpi-cpufreq.c
+++ linux-pm/drivers/cpufreq/acpi-cpufreq.c
@@ -806,6 +806,14 @@  static int acpi_cpufreq_cpu_init(struct
 		state_count++;
 		valid_states++;
 		data->first_perf_state = valid_states;
+	} else {
+		/*
+		 * If the maximum "boost" frequency is unknown, ask the arch
+		 * scale-invariance code to use the "nominal" performance for
+		 * CPU utilization scaling so as to prevent the schedutil
+		 * governor from selecting inadequate CPU frequencies.
+		 */
+		arch_set_max_freq_ratio(true);
 	}
 
 	freq_table = kcalloc(state_count, sizeof(*freq_table), GFP_KERNEL);
Index: linux-pm/arch/x86/kernel/smpboot.c
===================================================================
--- linux-pm.orig/arch/x86/kernel/smpboot.c
+++ linux-pm/arch/x86/kernel/smpboot.c
@@ -1833,6 +1833,7 @@  void arch_set_max_freq_ratio(bool turbo_
 	arch_max_freq_ratio = turbo_disabled ? SCHED_CAPACITY_SCALE :
 					arch_turbo_freq_ratio;
 }
+EXPORT_SYMBOL_GPL(arch_set_max_freq_ratio);
 
 static bool turbo_disabled(void)
 {