new file mode 100644
@@ -0,0 +1,129 @@
+/*
+ * Architecture specific implementation for EFI boot code. This file
+ * is intended to be included by common/efi/boot.c _only_, and
+ * therefore can define arch specific global variables.
+ */
+#include <asm/e820.h>
+#include <asm/edd.h>
+#include <asm/msr.h>
+#include <asm/processor.h>
+
+static struct file __initdata ucode;
+static multiboot_info_t __initdata mbi = {
+ .flags = MBI_MODULES | MBI_LOADERNAME
+};
+static module_t __initdata mb_modules[3];
+
+static void __init edd_put_string(u8 *dst, size_t n, const char *src)
+{
+ while ( n-- && *src )
+ *dst++ = *src++;
+ if ( *src )
+ PrintErrMesg(L"Internal error populating EDD info",
+ EFI_BUFFER_TOO_SMALL);
+ while ( n-- )
+ *dst++ = ' ';
+}
+#define edd_put_string(d, s) edd_put_string(d, ARRAY_SIZE(d), s)
+
+extern const intpte_t __page_tables_start[], __page_tables_end[];
+#define in_page_tables(v) ((intpte_t *)(v) >= __page_tables_start && \
+ (intpte_t *)(v) < __page_tables_end)
+
+#define PE_BASE_RELOC_ABS 0
+#define PE_BASE_RELOC_HIGHLOW 3
+#define PE_BASE_RELOC_DIR64 10
+
+extern const struct pe_base_relocs {
+ u32 rva;
+ u32 size;
+ u16 entries[];
+} __base_relocs_start[], __base_relocs_end[];
+
+static void __init efi_arch_relocate_image(unsigned long delta)
+{
+ const struct pe_base_relocs *base_relocs;
+
+ for ( base_relocs = __base_relocs_start; base_relocs < __base_relocs_end; )
+ {
+ unsigned int i, n;
+
+ n = (base_relocs->size - sizeof(*base_relocs)) /
+ sizeof(*base_relocs->entries);
+ for ( i = 0; i < n; ++i )
+ {
+ unsigned long addr = xen_phys_start + base_relocs->rva +
+ (base_relocs->entries[i] & 0xfff);
+
+ switch ( base_relocs->entries[i] >> 12 )
+ {
+ case PE_BASE_RELOC_ABS:
+ break;
+ case PE_BASE_RELOC_HIGHLOW:
+ if ( delta )
+ {
+ *(u32 *)addr += delta;
+ if ( in_page_tables(addr) )
+ *(u32 *)addr += xen_phys_start;
+ }
+ break;
+ case PE_BASE_RELOC_DIR64:
+ if ( delta )
+ {
+ *(u64 *)addr += delta;
+ if ( in_page_tables(addr) )
+ *(intpte_t *)addr += xen_phys_start;
+ }
+ break;
+ default:
+ blexit(L"Unsupported relocation type");
+ }
+ }
+ base_relocs = (const void *)(base_relocs->entries + i + (i & 1));
+ }
+}
+
+extern const s32 __trampoline_rel_start[], __trampoline_rel_stop[];
+extern const s32 __trampoline_seg_start[], __trampoline_seg_stop[];
+
+static void __init relocate_trampoline(unsigned long phys)
+{
+ const s32 *trampoline_ptr;
+
+ trampoline_phys = phys;
+ /* Apply relocations to trampoline. */
+ for ( trampoline_ptr = __trampoline_rel_start;
+ trampoline_ptr < __trampoline_rel_stop;
+ ++trampoline_ptr )
+ *(u32 *)(*trampoline_ptr + (long)trampoline_ptr) += phys;
+ for ( trampoline_ptr = __trampoline_seg_start;
+ trampoline_ptr < __trampoline_seg_stop;
+ ++trampoline_ptr )
+ *(u16 *)(*trampoline_ptr + (long)trampoline_ptr) = phys >> 4;
+}
+
+static void __init place_string(u32 *addr, const char *s)
+{
+ static char *__initdata alloc = start;
+
+ if ( s && *s )
+ {
+ size_t len1 = strlen(s) + 1;
+ const char *old = (char *)(long)*addr;
+ size_t len2 = *addr ? strlen(old) + 1 : 0;
+
+ alloc -= len1 + len2;
+ /*
+ * Insert new string before already existing one. This is needed
+ * for options passed on the command line to override options from
+ * the configuration file.
+ */
+ memcpy(alloc, s, len1);
+ if ( *addr )
+ {
+ alloc[len1 - 1] = ' ';
+ memcpy(alloc + len1, old, len2);
+ }
+ }
+ *addr = (long)alloc;
+}
@@ -18,13 +18,9 @@
#include <xen/string.h>
#include <xen/stringify.h>
#include <xen/vga.h>
-#include <asm/e820.h>
-#include <asm/edd.h>
#define __ASSEMBLY__ /* avoid pulling in ACPI stuff (conflicts with EFI) */
#include <asm/fixmap.h>
#undef __ASSEMBLY__
-#include <asm/msr.h>
-#include <asm/processor.h>
/* Using SetVirtualAddressMap() is incompatible with kexec: */
#undef USE_SET_VIRTUAL_ADDRESS_MAP
@@ -41,9 +37,6 @@ typedef struct {
EFI_SHIM_LOCK_VERIFY Verify;
} EFI_SHIM_LOCK_PROTOCOL;
-extern char start[];
-extern u32 cpuid_ext_features;
-
union string {
CHAR16 *w;
char *s;
@@ -58,6 +51,13 @@ struct file {
};
};
+static CHAR16 *FormatDec(UINT64 Val, CHAR16 *Buffer);
+static CHAR16 *FormatHex(UINT64 Val, UINTN Width, CHAR16 *Buffer);
+static void DisplayUint(UINT64 Val, INTN Width);
+static CHAR16 *wstrcpy(CHAR16 *d, const CHAR16 *s);
+static void noreturn blexit(const CHAR16 *str);
+static void PrintErrMesg(const CHAR16 *mesg, EFI_STATUS ErrCode);
+
static EFI_BOOT_SERVICES *__initdata efi_bs;
static EFI_HANDLE __initdata efi_ih;
@@ -69,19 +69,18 @@ static UINT32 __initdata mdesc_ver;
static struct file __initdata cfg;
static struct file __initdata kernel;
static struct file __initdata ramdisk;
-static struct file __initdata ucode;
static struct file __initdata xsm;
-
-static multiboot_info_t __initdata mbi = {
- .flags = MBI_MODULES | MBI_LOADERNAME
-};
-static module_t __initdata mb_modules[3];
-
static CHAR16 __initdata newline[] = L"\r\n";
#define PrintStr(s) StdOut->OutputString(StdOut, s)
#define PrintErr(s) StdErr->OutputString(StdErr, s)
+/*
+ * Include architecture specific implementation here, which references the
+ * static globals defined above.
+ */
+#include "efi-boot.h"
+
static CHAR16 *__init FormatDec(UINT64 Val, CHAR16 *Buffer)
{
if ( Val >= 10 )
@@ -255,32 +254,6 @@ static void __init PrintErrMesg(const CHAR16 *mesg, EFI_STATUS ErrCode)
blexit(mesg);
}
-static void __init place_string(u32 *addr, const char *s)
-{
- static char *__initdata alloc = start;
-
- if ( s && *s )
- {
- size_t len1 = strlen(s) + 1;
- const char *old = (char *)(long)*addr;
- size_t len2 = *addr ? strlen(old) + 1 : 0;
-
- alloc -= len1 + len2;
- /*
- * Insert new string before already existing one. This is needed
- * for options passed on the command line to override options from
- * the configuration file.
- */
- memcpy(alloc, s, len1);
- if ( *addr )
- {
- alloc[len1 - 1] = ' ';
- memcpy(alloc + len1, old, len2);
- }
- }
- *addr = (long)alloc;
-}
-
static unsigned int __init get_argv(unsigned int argc, CHAR16 **argv,
CHAR16 *cmdline, UINTN cmdsize)
{
@@ -574,18 +547,6 @@ static void __init split_value(char *s)
*s = 0;
}
-static void __init edd_put_string(u8 *dst, size_t n, const char *src)
-{
- while ( n-- && *src )
- *dst++ = *src++;
- if ( *src )
- PrintErrMesg(L"Internal error populating EDD info",
- EFI_BUFFER_TOO_SMALL);
- while ( n-- )
- *dst++ = ' ';
-}
-#define edd_put_string(d, s) edd_put_string(d, ARRAY_SIZE(d), s)
-
static void __init setup_efi_pci(void)
{
EFI_STATUS status;
@@ -688,82 +649,6 @@ static int __init set_color(u32 mask, int bpp, u8 *pos, u8 *sz)
return max(*pos + *sz, bpp);
}
-extern const intpte_t __page_tables_start[], __page_tables_end[];
-#define in_page_tables(v) ((intpte_t *)(v) >= __page_tables_start && \
- (intpte_t *)(v) < __page_tables_end)
-
-#define PE_BASE_RELOC_ABS 0
-#define PE_BASE_RELOC_HIGHLOW 3
-#define PE_BASE_RELOC_DIR64 10
-
-extern const struct pe_base_relocs {
- u32 rva;
- u32 size;
- u16 entries[];
-} __base_relocs_start[], __base_relocs_end[];
-
-static void __init relocate_image(unsigned long delta)
-{
- const struct pe_base_relocs *base_relocs;
-
- for ( base_relocs = __base_relocs_start; base_relocs < __base_relocs_end; )
- {
- unsigned int i, n;
-
- n = (base_relocs->size - sizeof(*base_relocs)) /
- sizeof(*base_relocs->entries);
- for ( i = 0; i < n; ++i )
- {
- unsigned long addr = xen_phys_start + base_relocs->rva +
- (base_relocs->entries[i] & 0xfff);
-
- switch ( base_relocs->entries[i] >> 12 )
- {
- case PE_BASE_RELOC_ABS:
- break;
- case PE_BASE_RELOC_HIGHLOW:
- if ( delta )
- {
- *(u32 *)addr += delta;
- if ( in_page_tables(addr) )
- *(u32 *)addr += xen_phys_start;
- }
- break;
- case PE_BASE_RELOC_DIR64:
- if ( delta )
- {
- *(u64 *)addr += delta;
- if ( in_page_tables(addr) )
- *(intpte_t *)addr += xen_phys_start;
- }
- break;
- default:
- blexit(L"Unsupported relocation type");
- }
- }
- base_relocs = (const void *)(base_relocs->entries + i + (i & 1));
- }
-}
-
-extern const s32 __trampoline_rel_start[], __trampoline_rel_stop[];
-extern const s32 __trampoline_seg_start[], __trampoline_seg_stop[];
-
-static void __init relocate_trampoline(unsigned long phys)
-{
- const s32 *trampoline_ptr;
-
- trampoline_phys = phys;
- /* Apply relocations to trampoline. */
- for ( trampoline_ptr = __trampoline_rel_start;
- trampoline_ptr < __trampoline_rel_stop;
- ++trampoline_ptr )
- *(u32 *)(*trampoline_ptr + (long)trampoline_ptr) += phys;
- for ( trampoline_ptr = __trampoline_seg_start;
- trampoline_ptr < __trampoline_seg_stop;
- ++trampoline_ptr )
- *(u16 *)(*trampoline_ptr + (long)trampoline_ptr) = phys >> 4;
-}
-
void EFIAPI __init noreturn
efi_start(EFI_HANDLE ImageHandle, EFI_SYSTEM_TABLE *SystemTable)
{
@@ -880,7 +765,7 @@ efi_start(EFI_HANDLE ImageHandle, EFI_SYSTEM_TABLE *SystemTable)
PrintStr(L"Xen " __stringify(XEN_VERSION) "." __stringify(XEN_SUBVERSION)
XEN_EXTRAVERSION " (c/s " XEN_CHANGESET ") EFI loader\r\n");
- relocate_image(0);
+ efi_arch_relocate_image(0);
if ( StdOut->QueryMode(StdOut, StdOut->Mode->Mode,
&cols, &rows) == EFI_SUCCESS )
@@ -1461,7 +1346,7 @@ efi_start(EFI_HANDLE ImageHandle, EFI_SYSTEM_TABLE *SystemTable)
efi_memmap = (void *)efi_memmap + DIRECTMAP_VIRT_START;
efi_fw_vendor = (void *)efi_fw_vendor + DIRECTMAP_VIRT_START;
- relocate_image(__XEN_VIRT_START - xen_phys_start);
+ efi_arch_relocate_image(__XEN_VIRT_START - xen_phys_start);
memcpy((void *)trampoline_phys, trampoline_start, cfg.size);
/* Set system registers and transfer control. */
@@ -199,6 +199,7 @@ extern void set_cpuid_faulting(bool_t enable);
extern u64 host_pat;
extern bool_t opt_cpu_info;
+extern u32 cpuid_ext_features;
/* Maximum width of physical addresses supported by the hardware */
extern unsigned int paddr_bits;
@@ -65,7 +65,7 @@
1; \
})
-extern char _start[], _end[];
+extern char _start[], _end[], start[];
#define is_kernel(p) ({ \
char *__p = (char *)(unsigned long)(p); \
(__p >= _start) && (__p < _end); \
Move the global variables and functions that can be moved as-is from the common boot.c file to the x86 implementation header file. Signed-off-by: Roy Franz <roy.franz@linaro.org> --- xen/arch/x86/efi/efi-boot.h | 129 +++++++++++++++++++++++++++++++++++ xen/common/efi/boot.c | 145 +++++----------------------------------- xen/include/asm-x86/processor.h | 1 + xen/include/xen/kernel.h | 2 +- 4 files changed, 146 insertions(+), 131 deletions(-) create mode 100644 xen/arch/x86/efi/efi-boot.h