diff mbox series

[v3,6/6] Bluetooth: btusb: Consolidate code for waiting firmware to boot

Message ID 20210209233404.2121960-6-luiz.dentz@gmail.com
State Superseded
Headers show
Series [v3,1/6] Bluetooth: btintel: Check firmware version before download | expand

Commit Message

Luiz Augusto von Dentz Feb. 9, 2021, 11:34 p.m. UTC
From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This moves duplicated code for waiting firmware download to complete to
a function that can then be reused.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 drivers/bluetooth/btusb.c | 148 +++++++++++++++++---------------------
 1 file changed, 66 insertions(+), 82 deletions(-)
diff mbox series

Patch

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 0462961f4690..870da9eecfee 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2808,6 +2808,68 @@  static int btusb_intel_download_firmware(struct hci_dev *hdev,
 	return err;
 }
 
+static int btusb_boot_wait(struct hci_dev *hdev, ktime_t calltime, int msec)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	ktime_t delta, rettime;
+	unsigned long long duration;
+	int err;
+
+	bt_dev_info(hdev, "Waiting for device to boot");
+
+	err = wait_on_bit_timeout(&data->flags, BTUSB_BOOTING,
+				  TASK_INTERRUPTIBLE,
+				  msecs_to_jiffies(msec));
+	if (err == -EINTR) {
+		bt_dev_err(hdev, "Device boot interrupted");
+		return -EINTR;
+	}
+
+	if (err) {
+		bt_dev_err(hdev, "Device boot timeout");
+		return -ETIMEDOUT;
+	}
+
+	rettime = ktime_get();
+	delta = ktime_sub(rettime, calltime);
+	duration = (unsigned long long) ktime_to_ns(delta) >> 10;
+
+	bt_dev_info(hdev, "Device booted in %llu usecs", duration);
+
+	return 0;
+}
+
+static int btusb_intel_boot(struct hci_dev *hdev, u32 boot_addr)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	ktime_t calltime;
+	int err;
+
+	calltime = ktime_get();
+
+	set_bit(BTUSB_BOOTING, &data->flags);
+
+	err = btintel_send_intel_reset(hdev, boot_addr);
+	if (err) {
+		bt_dev_err(hdev, "Intel Soft Reset failed (%d)", err);
+		btintel_reset_to_bootloader(hdev);
+		return err;
+	}
+
+	/* The bootloader will not indicate when the device is ready. This
+	 * is done by the operational firmware sending bootup notification.
+	 *
+	 * Booting into operational firmware should not take longer than
+	 * 1 second. However if that happens, then just fail the setup
+	 * since something went wrong.
+	 */
+	err = btusb_boot_wait(hdev, calltime, 1000);
+	if (err == -ETIMEDOUT)
+		btintel_reset_to_bootloader(hdev);
+
+	return err;
+}
+
 static int btusb_setup_intel_new(struct hci_dev *hdev)
 {
 	struct btusb_data *data = hci_get_drvdata(hdev);
@@ -2815,8 +2877,6 @@  static int btusb_setup_intel_new(struct hci_dev *hdev)
 	struct intel_boot_params params;
 	u32 boot_param;
 	char ddcname[64];
-	ktime_t calltime, delta, rettime;
-	unsigned long long duration;
 	int err;
 	struct intel_debug_features features;
 
@@ -2851,46 +2911,9 @@  static int btusb_setup_intel_new(struct hci_dev *hdev)
 	if (ver.fw_variant == 0x23)
 		goto finish;
 
-	calltime = ktime_get();
-
-	set_bit(BTUSB_BOOTING, &data->flags);
-
-	err = btintel_send_intel_reset(hdev, boot_param);
-	if (err) {
-		bt_dev_err(hdev, "Intel Soft Reset failed (%d)", err);
-		btintel_reset_to_bootloader(hdev);
+	err = btusb_intel_boot(hdev, boot_param);
+	if (err)
 		return err;
-	}
-
-	/* The bootloader will not indicate when the device is ready. This
-	 * is done by the operational firmware sending bootup notification.
-	 *
-	 * Booting into operational firmware should not take longer than
-	 * 1 second. However if that happens, then just fail the setup
-	 * since something went wrong.
-	 */
-	bt_dev_info(hdev, "Waiting for device to boot");
-
-	err = wait_on_bit_timeout(&data->flags, BTUSB_BOOTING,
-				  TASK_INTERRUPTIBLE,
-				  msecs_to_jiffies(1000));
-
-	if (err == -EINTR) {
-		bt_dev_err(hdev, "Device boot interrupted");
-		return -EINTR;
-	}
-
-	if (err) {
-		bt_dev_err(hdev, "Device boot timeout");
-		btintel_reset_to_bootloader(hdev);
-		return -ETIMEDOUT;
-	}
-
-	rettime = ktime_get();
-	delta = ktime_sub(rettime, calltime);
-	duration = (unsigned long long) ktime_to_ns(delta) >> 10;
-
-	bt_dev_info(hdev, "Device booted in %llu usecs", duration);
 
 	clear_bit(BTUSB_BOOTLOADER, &data->flags);
 
@@ -2954,8 +2977,6 @@  static int btusb_setup_intel_newgen(struct hci_dev *hdev)
 	struct btusb_data *data = hci_get_drvdata(hdev);
 	u32 boot_param;
 	char ddcname[64];
-	ktime_t calltime, delta, rettime;
-	unsigned long long duration;
 	int err;
 	struct intel_debug_features features;
 	struct intel_version_tlv version;
@@ -2991,46 +3012,9 @@  static int btusb_setup_intel_newgen(struct hci_dev *hdev)
 	if (version.img_type == 0x03)
 		goto finish;
 
-	calltime = ktime_get();
-
-	set_bit(BTUSB_BOOTING, &data->flags);
-
-	err = btintel_send_intel_reset(hdev, boot_param);
-	if (err) {
-		bt_dev_err(hdev, "Intel Soft Reset failed (%d)", err);
-		btintel_reset_to_bootloader(hdev);
+	err = btusb_intel_boot(hdev, boot_param);
+	if (err)
 		return err;
-	}
-
-	/* The bootloader will not indicate when the device is ready. This
-	 * is done by the operational firmware sending bootup notification.
-	 *
-	 * Booting into operational firmware should not take longer than
-	 * 1 second. However if that happens, then just fail the setup
-	 * since something went wrong.
-	 */
-	bt_dev_info(hdev, "Waiting for device to boot");
-
-	err = wait_on_bit_timeout(&data->flags, BTUSB_BOOTING,
-				  TASK_INTERRUPTIBLE,
-				  msecs_to_jiffies(1000));
-
-	if (err == -EINTR) {
-		bt_dev_err(hdev, "Device boot interrupted");
-		return -EINTR;
-	}
-
-	if (err) {
-		bt_dev_err(hdev, "Device boot timeout");
-		btintel_reset_to_bootloader(hdev);
-		return -ETIMEDOUT;
-	}
-
-	rettime = ktime_get();
-	delta = ktime_sub(rettime, calltime);
-	duration = (unsigned long long)ktime_to_ns(delta) >> 10;
-
-	bt_dev_info(hdev, "Device booted in %llu usecs", duration);
 
 	clear_bit(BTUSB_BOOTLOADER, &data->flags);