From patchwork Fri Feb 12 12:07:23 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sai Krishna Potthuri X-Patchwork-Id: 382072 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-16.7 required=3.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID, HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_CR_TRAILER, INCLUDES_PATCH, MAILING_LIST_MULTI, SPF_HELO_NONE, SPF_PASS, URIBL_BLOCKED, USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id BAB7EC4332B for ; Fri, 12 Feb 2021 12:10:22 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 920F864E31 for ; Fri, 12 Feb 2021 12:10:22 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231209AbhBLMKU (ORCPT ); Fri, 12 Feb 2021 07:10:20 -0500 Received: from mail-eopbgr760081.outbound.protection.outlook.com ([40.107.76.81]:50926 "EHLO NAM02-CY1-obe.outbound.protection.outlook.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S230291AbhBLMKK (ORCPT ); Fri, 12 Feb 2021 07:10:10 -0500 ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=UCrGECfyDXsf1wKhs/YFcriGPN5Ub+oAgTDqlo+9nB2dkQaqqUo1jj1RqMehCgbAbd3Fiwa87EHKrHemK1FEIwHzlLWrUTmXpluD1u02Tx/PG9WzVWkIvfi2dZGQBLoK3rSnm/N2dFQs/gkvf7m7o3XB+N+sPbnYr6LReRYagVqYBwrwO3LVF4MuAqRFzEqRuZEIYpnLOY0ArSGgSdnISe+9bgWOF/seuZVjG8R2obcRntRWx5OG5CPTkLvXoIvoWVfaCrHHi/iiGTcM6fHwprJEG8E352rLUUjZdobGqcQDUF7G09qPewUM88HITY8A3K51IFTG21WrOiLJaZwKzw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=bbK8UIWZQo3OwY1BIe3+NH3ADnfU8uFX4hLn+tJ5g/s=; b=dxZTVHbhIcPxzgaTMyYL/ZFA3Jbg2zfCyLRe4KyrbjFLZk5lZ0TRw4GOCgsNPs15u5NsL44gfss/Xpr/KD2YF1YiWhuzRu2bQn+P8jwqCCch8SeZnCNT1EVKcPkXF6J4WAlFGvqM9Pjic/kdk4xwQJzBPz+Lvqyr9kQ0zrdFBZ6j8ViMtwOhLXDdsu9zErXexRctEJNFVRPbYDpWEedv8u76aCb7PJv1BReTrvq/nv6nvdQ6vplH2wrK6NbUc9jtK1L7Ptcq5gd5KWhX0PNLmebYcuRt2upIk84clJgjAxNbp4PKUiTotzpQRdoP7kZ+jMV8kI8j+cTxnh/USTzpsQ== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass (sender ip is 149.199.62.198) smtp.rcpttodomain=gmail.com smtp.mailfrom=xilinx.com; dmarc=bestguesspass action=none header.from=xilinx.com; dkim=none (message not signed); arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=xilinx.onmicrosoft.com; s=selector2-xilinx-onmicrosoft-com; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=bbK8UIWZQo3OwY1BIe3+NH3ADnfU8uFX4hLn+tJ5g/s=; b=YCCVr3wgFtrrV23DjecUSRAtBc9M5nVF7M43Ez08V+XhQjDUiUkTMsQ84OT9qN+JO+y6lYbKGEq/A9IWkqxwZlzhvZr5gJ3jmR7lZhdS4cR6MsX/bOAiuHDDvtr536INmMUQ0yynxqO2DefLzP0FRlceZMMwMOkqTu6p3IErMVI= Received: from MN2PR12CA0013.namprd12.prod.outlook.com (2603:10b6:208:a8::26) by BN7PR02MB5187.namprd02.prod.outlook.com (2603:10b6:408:22::30) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.3846.27; Fri, 12 Feb 2021 12:09:18 +0000 Received: from BL2NAM02FT024.eop-nam02.prod.protection.outlook.com (2603:10b6:208:a8:cafe::90) by MN2PR12CA0013.outlook.office365.com (2603:10b6:208:a8::26) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.3846.27 via Frontend Transport; Fri, 12 Feb 2021 12:09:18 +0000 X-MS-Exchange-Authentication-Results: spf=pass (sender IP is 149.199.62.198) smtp.mailfrom=xilinx.com; gmail.com; dkim=none (message not signed) header.d=none;gmail.com; dmarc=bestguesspass action=none header.from=xilinx.com; Received-SPF: Pass (protection.outlook.com: domain of xilinx.com designates 149.199.62.198 as permitted sender) receiver=protection.outlook.com; client-ip=149.199.62.198; helo=xsj-pvapexch02.xlnx.xilinx.com; Received: from xsj-pvapexch02.xlnx.xilinx.com (149.199.62.198) by BL2NAM02FT024.mail.protection.outlook.com (10.152.77.62) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.20.3846.25 via Frontend Transport; Fri, 12 Feb 2021 12:09:18 +0000 Received: from xsj-pvapexch01.xlnx.xilinx.com (172.19.86.40) by xsj-pvapexch02.xlnx.xilinx.com (172.19.86.41) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.1913.5; Fri, 12 Feb 2021 04:08:52 -0800 Received: from smtp.xilinx.com (172.19.127.95) by xsj-pvapexch01.xlnx.xilinx.com (172.19.86.40) with Microsoft SMTP Server id 15.1.1913.5 via Frontend Transport; Fri, 12 Feb 2021 04:08:52 -0800 Envelope-to: git@xilinx.com, michal.simek@xilinx.com, saikrishna12468@gmail.com, robh+dt@kernel.org, linus.walleij@linaro.org, gregkh@linuxfoundation.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org Received: from [172.23.64.106] (port=53737 helo=xhdvnc125.xilinx.com) by smtp.xilinx.com with esmtp (Exim 4.90) (envelope-from ) id 1lAXFi-0006Ha-Nh; Fri, 12 Feb 2021 04:08:51 -0800 Received: by xhdvnc125.xilinx.com (Postfix, from userid 14964) id 4AB111213FB; Fri, 12 Feb 2021 17:38:09 +0530 (IST) From: Sai Krishna Potthuri To: Linus Walleij , Rob Herring , Michal Simek , "Greg Kroah-Hartman" CC: , , , , , , Sai Krishna Potthuri Subject: [PATCH v3 3/3] pinctrl: Add Xilinx ZynqMP pinctrl driver support Date: Fri, 12 Feb 2021 17:37:23 +0530 Message-ID: <1613131643-60062-4-git-send-email-lakshmi.sai.krishna.potthuri@xilinx.com> X-Mailer: git-send-email 2.1.1 In-Reply-To: <1613131643-60062-1-git-send-email-lakshmi.sai.krishna.potthuri@xilinx.com> References: <1613131643-60062-1-git-send-email-lakshmi.sai.krishna.potthuri@xilinx.com> MIME-Version: 1.0 X-EOPAttributedMessage: 0 X-MS-Office365-Filtering-HT: Tenant X-MS-PublicTrafficType: Email X-MS-Office365-Filtering-Correlation-Id: b0f01cf7-faed-4408-18bb-08d8cf4f0600 X-MS-TrafficTypeDiagnostic: BN7PR02MB5187: X-Microsoft-Antispam-PRVS: X-Auto-Response-Suppress: DR, RN, NRN, OOF, AutoReply X-MS-Oob-TLC-OOBClassifiers: OLM:222; X-MS-Exchange-SenderADCheck: 1 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:149.199.62.198; CTRY:US; LANG:en; SCL:1; SRV:; IPV:NLI; SFV:NSPM; H:xsj-pvapexch02.xlnx.xilinx.com; PTR:unknown-62-198.xilinx.com; CAT:NONE; SFS:(4636009)(136003)(346002)(376002)(39860400002)(396003)(46966006)(36840700001)(2906002)(336012)(36756003)(6666004)(2616005)(7636003)(26005)(186003)(82310400003)(47076005)(356005)(426003)(82740400003)(83380400001)(478600001)(54906003)(107886003)(5660300002)(4326008)(6266002)(110136005)(8936002)(8676002)(316002)(70206006)(30864003)(70586007)(36906005)(42186006)(36860700001)(102446001); DIR:OUT; SFP:1101; X-OriginatorOrg: xilinx.com X-MS-Exchange-CrossTenant-OriginalArrivalTime: 12 Feb 2021 12:09:18.1551 (UTC) X-MS-Exchange-CrossTenant-Network-Message-Id: b0f01cf7-faed-4408-18bb-08d8cf4f0600 X-MS-Exchange-CrossTenant-Id: 657af505-d5df-48d0-8300-c31994686c5c X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=657af505-d5df-48d0-8300-c31994686c5c; Ip=[149.199.62.198]; Helo=[xsj-pvapexch02.xlnx.xilinx.com] X-MS-Exchange-CrossTenant-AuthSource: BL2NAM02FT024.eop-nam02.prod.protection.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Anonymous X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem X-MS-Exchange-Transport-CrossTenantHeadersStamped: BN7PR02MB5187 Precedence: bulk List-ID: X-Mailing-List: linux-gpio@vger.kernel.org Adding pinctrl driver for Xilinx ZynqMP platform. This driver queries pin information from firmware and registers pin control accordingly. Signed-off-by: Sai Krishna Potthuri --- drivers/pinctrl/Kconfig | 13 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-zynqmp.c | 1031 ++++++++++++++++++++++++++++++ 3 files changed, 1045 insertions(+) create mode 100644 drivers/pinctrl/pinctrl-zynqmp.c diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 815095326e2d..25d3c7208975 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -341,6 +341,19 @@ config PINCTRL_ZYNQ help This selects the pinctrl driver for Xilinx Zynq. +config PINCTRL_ZYNQMP + bool "Pinctrl driver for Xilinx ZynqMP" + depends on ARCH_ZYNQMP + select PINMUX + select GENERIC_PINCONF + help + This selects the pinctrl driver for Xilinx ZynqMP platform. + This driver will query the pin information from the firmware + and allow configuring the pins. + Configuration can include the mux function to select on those + pin(s)/group(s), and various pin configuration parameters + such as pull-up, slew rate, etc. + config PINCTRL_INGENIC bool "Pinctrl driver for the Ingenic JZ47xx SoCs" default MACH_INGENIC diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index f53933b2ff02..7e058739f0d5 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -43,6 +43,7 @@ obj-$(CONFIG_PINCTRL_TB10X) += pinctrl-tb10x.o obj-$(CONFIG_PINCTRL_ST) += pinctrl-st.o obj-$(CONFIG_PINCTRL_STMFX) += pinctrl-stmfx.o obj-$(CONFIG_PINCTRL_ZYNQ) += pinctrl-zynq.o +obj-$(CONFIG_PINCTRL_ZYNQMP) += pinctrl-zynqmp.o obj-$(CONFIG_PINCTRL_INGENIC) += pinctrl-ingenic.o obj-$(CONFIG_PINCTRL_RK805) += pinctrl-rk805.o obj-$(CONFIG_PINCTRL_OCELOT) += pinctrl-ocelot.o diff --git a/drivers/pinctrl/pinctrl-zynqmp.c b/drivers/pinctrl/pinctrl-zynqmp.c new file mode 100644 index 000000000000..ec0a5d0e22d5 --- /dev/null +++ b/drivers/pinctrl/pinctrl-zynqmp.c @@ -0,0 +1,1031 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ZynqMP pin controller + * + * Copyright (C) 2020 Xilinx, Inc. + * + * Sai Krishna Potthuri + * Rajan Vaja + */ + +#include +#include +#include +#include +#include +#include +#include +#include "core.h" +#include "pinctrl-utils.h" + +#define ZYNQMP_PIN_PREFIX "MIO" +#define PINCTRL_GET_FUNC_NAME_RESP_LEN 16 +#define MAX_FUNC_NAME_LEN 16 +#define MAX_GROUP_PIN 50 +#define END_OF_FUNCTIONS "END_OF_FUNCTIONS" +#define NUM_GROUPS_PER_RESP 6 + +#define PINCTRL_GET_FUNC_GROUPS_RESP_LEN 12 +#define PINCTRL_GET_PIN_GROUPS_RESP_LEN 12 +#define NA_GROUP -1 +#define RESERVED_GROUP -2 + +#define DRIVE_STRENGTH_2MA 2 +#define DRIVE_STRENGTH_4MA 4 +#define DRIVE_STRENGTH_8MA 8 +#define DRIVE_STRENGTH_12MA 12 + +/** + * struct zynqmp_pmux_function - a pinmux function + * @name: Name of the pinmux function + * @groups: List of pingroups for this function + * @ngroups: Number of entries in @groups + * @node:` Firmware node matching with for function + * + * This structure holds information about pin control function + * and function group names supporting that function. + */ +struct zynqmp_pmux_function { + char name[MAX_FUNC_NAME_LEN]; + const char * const *groups; + unsigned int ngroups; +}; + +/** + * struct zynqmp_pinctrl - driver data + * @pctrl: Pinctrl device + * @groups: Pingroups + * @ngroups: Number of @groups + * @funcs: Pinmux functions + * @nfuncs: Number of @funcs + * + * This struct is stored as driver data and used to retrieve + * information regarding pin control functions, groups and + * group pins. + */ +struct zynqmp_pinctrl { + struct pinctrl_dev *pctrl; + const struct zynqmp_pctrl_group *groups; + unsigned int ngroups; + const struct zynqmp_pmux_function *funcs; + unsigned int nfuncs; +}; + +/** + * struct zynqmp_pctrl_group - Pin control group info + * @name: Group name + * @pins: Group pin numbers + * @npins: Number of pins in group + */ +struct zynqmp_pctrl_group { + const char *name; + unsigned int pins[MAX_GROUP_PIN]; + unsigned int npins; +}; + +/** + * enum zynqmp_pin_config_param - possible pin configuration parameters + * @PIN_CONFIG_IOSTANDARD: if the pin can select an IO standard, + * the argument to this parameter (on a + * custom format) tells the driver which + * alternative IO standard to use + */ +enum zynqmp_pin_config_param { + PIN_CONFIG_IOSTANDARD = PIN_CONFIG_END + 1, +}; + +static const struct pinconf_generic_params zynqmp_dt_params[] = { + {"io-standard", PIN_CONFIG_IOSTANDARD, IO_STANDARD_LVCMOS18}, +}; + +#ifdef CONFIG_DEBUG_FS +static const struct +pin_config_item zynqmp_conf_items[ARRAY_SIZE(zynqmp_dt_params)] = { + PCONFDUMP(PIN_CONFIG_IOSTANDARD, "io-standard", NULL, true), +}; +#endif + +static struct pinctrl_desc zynqmp_desc; + +/** + * zynqmp_pctrl_get_groups_count() - get group count + * @pctldev: Pincontrol device pointer. + * + * Get total groups count. + * + * Return: group count. + */ +static int zynqmp_pctrl_get_groups_count(struct pinctrl_dev *pctldev) +{ + struct zynqmp_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); + + return pctrl->ngroups; +} + +/** + * zynqmp_pctrl_get_group_name() - get group name + * @pctldev: Pincontrol device pointer. + * @selector: Group ID. + * + * Get gorup's name. + * + * Return: group name. + */ +static const char *zynqmp_pctrl_get_group_name(struct pinctrl_dev *pctldev, + unsigned int selector) +{ + struct zynqmp_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); + + return pctrl->groups[selector].name; +} + +/** + * zynqmp_pctrl_get_group_pins() - get group pins + * @pctldev: Pincontrol device pointer. + * @selector: Group ID. + * @pins: Pin numbers. + * @npins: Number of pins in group. + * + * Get gorup's pin count and pin number. + * + * Return: Success. + */ +static int zynqmp_pctrl_get_group_pins(struct pinctrl_dev *pctldev, + unsigned int selector, + const unsigned int **pins, + unsigned int *npins) +{ + struct zynqmp_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); + + *pins = pctrl->groups[selector].pins; + *npins = pctrl->groups[selector].npins; + + return 0; +} + +static const struct pinctrl_ops zynqmp_pctrl_ops = { + .get_groups_count = zynqmp_pctrl_get_groups_count, + .get_group_name = zynqmp_pctrl_get_group_name, + .get_group_pins = zynqmp_pctrl_get_group_pins, + .dt_node_to_map = pinconf_generic_dt_node_to_map_all, + .dt_free_map = pinctrl_utils_free_map, +}; + +/** + * zynqmp_pinmux_request_pin() - Request a pin for muxing + * @pctldev: Pincontrol device pointer. + * @pin: Pin number. + * + * Request a pin from firmware for muxing. + * + * Return: 0 on success else error code. + */ +static int zynqmp_pinmux_request_pin(struct pinctrl_dev *pctldev, + unsigned int pin) +{ + int ret; + + ret = zynqmp_pm_pinctrl_request(pin); + if (ret) { + dev_err(pctldev->dev, "request failed for pin %u\n", pin); + return -EIO; + } + + return 0; +} + +/** + * zynqmp_pmux_get_functions_count() - get number of functions + * @pctldev: Pincontrol device pointer. + * + * Get total function count. + * + * Return: function count. + */ +static int zynqmp_pmux_get_functions_count(struct pinctrl_dev *pctldev) +{ + struct zynqmp_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); + + return pctrl->nfuncs; +} + +/** + * zynqmp_pmux_get_function_name() - get function name + * @pctldev: Pincontrol device pointer. + * @selector: Function ID. + * + * Get function's name. + * + * Return: function name. + */ +static const char *zynqmp_pmux_get_function_name(struct pinctrl_dev *pctldev, + unsigned int selector) +{ + struct zynqmp_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); + + return pctrl->funcs[selector].name; +} + +/** + * zynqmp_pmux_get_function_groups() - Get groups for the function + * @pctldev: Pincontrol device pointer. + * @selector: Function ID + * @groups: Group names. + * @num_groups: Number of function groups. + * + * Get function's group count and group names. + * + * Return: Success. + */ +static int zynqmp_pmux_get_function_groups(struct pinctrl_dev *pctldev, + unsigned int selector, + const char * const **groups, + unsigned * const num_groups) +{ + struct zynqmp_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); + + *groups = pctrl->funcs[selector].groups; + *num_groups = pctrl->funcs[selector].ngroups; + + return 0; +} + +/** + * zynqmp_pinmux_set_mux() - Set requested function for the group + * @pctldev: Pincontrol device pointer. + * @function: Function ID. + * @group: Group ID. + * + * Loop though all pins of group and call firmware API + * to set requested function for all pins in group. + * + * Return: 0 on success else error code. + */ +static int zynqmp_pinmux_set_mux(struct pinctrl_dev *pctldev, + unsigned int function, + unsigned int group) +{ + struct zynqmp_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); + const struct zynqmp_pctrl_group *pgrp = &pctrl->groups[group]; + int ret, i; + + for (i = 0; i < pgrp->npins; i++) { + unsigned int pin = pgrp->pins[i]; + + ret = zynqmp_pm_pinctrl_set_function(pin, function); + if (ret) { + dev_err(pctldev->dev, "set mux failed for pin %u\n", + pin); + return -EIO; + } + } + + return 0; +} + +/** + * zynqmp_pinmux_release_pin() - Release a pin + * @pctldev: Pincontrol device pointer. + * @pin: Pin number. + * + * Release a pin from firmware. + * + * Return: 0 on success else error code. + */ +static int zynqmp_pinmux_release_pin(struct pinctrl_dev *pctldev, + unsigned int pin) +{ + int ret; + + ret = zynqmp_pm_pinctrl_release(pin); + if (ret) { + dev_err(pctldev->dev, "free pin failed for pin %u\n", + pin); + return -EIO; + } + + return 0; +} + +static const struct pinmux_ops zynqmp_pinmux_ops = { + .request = zynqmp_pinmux_request_pin, + .get_functions_count = zynqmp_pmux_get_functions_count, + .get_function_name = zynqmp_pmux_get_function_name, + .get_function_groups = zynqmp_pmux_get_function_groups, + .set_mux = zynqmp_pinmux_set_mux, + .free = zynqmp_pinmux_release_pin, +}; + +/** + * zynqmp_pinconf_cfg_get() - get config value for the pin + * @pctldev: Pin control device pointer. + * @pin: Pin number. + * @config: Value of config param. + * + * Get value of the requested configuration parameter for the + * given pin. + * + * Return: 0 on success else error code. + */ +static int zynqmp_pinconf_cfg_get(struct pinctrl_dev *pctldev, + unsigned int pin, + unsigned long *config) +{ + int ret; + unsigned int arg = 0, param = pinconf_to_config_param(*config); + + if (pin >= zynqmp_desc.npins) + return -EOPNOTSUPP; + + switch (param) { + case PIN_CONFIG_SLEW_RATE: + param = PM_PINCTRL_CONFIG_SLEW_RATE; + ret = zynqmp_pm_pinctrl_get_config(pin, param, &arg); + break; + case PIN_CONFIG_BIAS_PULL_UP: + param = PM_PINCTRL_CONFIG_PULL_CTRL; + ret = zynqmp_pm_pinctrl_get_config(pin, param, &arg); + if (arg != PM_PINCTRL_BIAS_PULL_UP) + return -EINVAL; + + arg = 1; + break; + case PIN_CONFIG_BIAS_PULL_DOWN: + param = PM_PINCTRL_CONFIG_PULL_CTRL; + ret = zynqmp_pm_pinctrl_get_config(pin, param, &arg); + if (arg != PM_PINCTRL_BIAS_PULL_DOWN) + return -EINVAL; + + arg = 1; + break; + case PIN_CONFIG_BIAS_DISABLE: + param = PM_PINCTRL_CONFIG_BIAS_STATUS; + ret = zynqmp_pm_pinctrl_get_config(pin, param, &arg); + if (arg != PM_PINCTRL_BIAS_DISABLE) + return -EINVAL; + + arg = 1; + break; + case PIN_CONFIG_IOSTANDARD: + param = PM_PINCTRL_CONFIG_VOLTAGE_STATUS; + ret = zynqmp_pm_pinctrl_get_config(pin, param, &arg); + break; + case PIN_CONFIG_INPUT_SCHMITT_ENABLE: + param = PM_PINCTRL_CONFIG_SCHMITT_CMOS; + ret = zynqmp_pm_pinctrl_get_config(pin, param, &arg); + break; + case PIN_CONFIG_DRIVE_STRENGTH: + param = PM_PINCTRL_CONFIG_DRIVE_STRENGTH; + ret = zynqmp_pm_pinctrl_get_config(pin, param, &arg); + switch (arg) { + case PM_PINCTRL_DRIVE_STRENGTH_2MA: + arg = DRIVE_STRENGTH_2MA; + break; + case PM_PINCTRL_DRIVE_STRENGTH_4MA: + arg = DRIVE_STRENGTH_4MA; + break; + case PM_PINCTRL_DRIVE_STRENGTH_8MA: + arg = DRIVE_STRENGTH_8MA; + break; + case PM_PINCTRL_DRIVE_STRENGTH_12MA: + arg = DRIVE_STRENGTH_12MA; + break; + default: + /* Invalid drive strength */ + dev_warn(pctldev->dev, + "Invalid drive strength for pin %d\n", + pin); + return -EINVAL; + } + break; + default: + ret = -EOPNOTSUPP; + break; + } + + param = pinconf_to_config_param(*config); + *config = pinconf_to_config_packed(param, arg); + + return ret; +} + +/** + * zynqmp_pinconf_cfg_set() - Set requested config for the pin + * @pctldev: Pincontrol device pointer. + * @pin: Pin number. + * @configs: Configuration to set. + * @num_configs: Number of configurations. + * + * Loop though all configurations and call firmware API + * to set requested configurations for the pin. + * + * Return: 0 on success else error code. + */ +static int zynqmp_pinconf_cfg_set(struct pinctrl_dev *pctldev, + unsigned int pin, unsigned long *configs, + unsigned int num_configs) +{ + int i, ret; + + if (pin >= zynqmp_desc.npins) + return -EOPNOTSUPP; + + for (i = 0; i < num_configs; i++) { + unsigned int param = pinconf_to_config_param(configs[i]); + unsigned int arg = pinconf_to_config_argument(configs[i]); + unsigned int value; + + switch (param) { + case PIN_CONFIG_SLEW_RATE: + param = PM_PINCTRL_CONFIG_SLEW_RATE; + ret = zynqmp_pm_pinctrl_set_config(pin, param, arg); + break; + case PIN_CONFIG_BIAS_PULL_UP: + param = PM_PINCTRL_CONFIG_PULL_CTRL; + arg = PM_PINCTRL_BIAS_PULL_UP; + ret = zynqmp_pm_pinctrl_set_config(pin, param, arg); + break; + case PIN_CONFIG_BIAS_PULL_DOWN: + param = PM_PINCTRL_CONFIG_PULL_CTRL; + arg = PM_PINCTRL_BIAS_PULL_DOWN; + ret = zynqmp_pm_pinctrl_set_config(pin, param, arg); + break; + case PIN_CONFIG_BIAS_DISABLE: + param = PM_PINCTRL_CONFIG_BIAS_STATUS; + arg = PM_PINCTRL_BIAS_DISABLE; + ret = zynqmp_pm_pinctrl_set_config(pin, param, arg); + break; + case PIN_CONFIG_INPUT_SCHMITT_ENABLE: + param = PM_PINCTRL_CONFIG_SCHMITT_CMOS; + ret = zynqmp_pm_pinctrl_set_config(pin, param, arg); + break; + case PIN_CONFIG_DRIVE_STRENGTH: + switch (arg) { + case DRIVE_STRENGTH_2MA: + value = PM_PINCTRL_DRIVE_STRENGTH_2MA; + break; + case DRIVE_STRENGTH_4MA: + value = PM_PINCTRL_DRIVE_STRENGTH_4MA; + break; + case DRIVE_STRENGTH_8MA: + value = PM_PINCTRL_DRIVE_STRENGTH_8MA; + break; + case DRIVE_STRENGTH_12MA: + value = PM_PINCTRL_DRIVE_STRENGTH_12MA; + break; + default: + /* Invalid drive strength */ + dev_warn(pctldev->dev, + "Invalid drive strength for pin %d\n", + pin); + return -EINVAL; + } + + param = PM_PINCTRL_CONFIG_DRIVE_STRENGTH; + ret = zynqmp_pm_pinctrl_set_config(pin, param, value); + break; + case PIN_CONFIG_IOSTANDARD: + param = PM_PINCTRL_CONFIG_VOLTAGE_STATUS; + ret = zynqmp_pm_pinctrl_get_config(pin, param, &value); + + if (arg != value) + dev_warn(pctldev->dev, + "Invalid IO Standard requested for pin %d\n", + pin); + + break; + case PIN_CONFIG_BIAS_HIGH_IMPEDANCE: + case PIN_CONFIG_LOW_POWER_MODE: + /* + * These cases are mentioned in dts but configurable + * registers are unknown. So falling through to ignore + * boot time warnings as of now. + */ + ret = 0; + break; + default: + dev_warn(pctldev->dev, + "unsupported configuration parameter '%u'\n", + param); + ret = -EOPNOTSUPP; + break; + } + + param = pinconf_to_config_param(configs[i]); + arg = pinconf_to_config_argument(configs[i]); + if (ret) + dev_warn(pctldev->dev, + "%s failed: pin %u param %u value %u\n", + __func__, pin, param, arg); + } + + return 0; +} + +/** + * zynqmp_pinconf_group_set() - Set requested config for the group + * @pctldev: Pincontrol device pointer. + * @selector: Group ID. + * @configs: Configuration to set. + * @num_configs: Number of configurations. + * + * Call function to set configs for each pin in group. + * + * Return: 0 on success else error code. + */ +static int zynqmp_pinconf_group_set(struct pinctrl_dev *pctldev, + unsigned int selector, + unsigned long *configs, + unsigned int num_configs) +{ + int i, ret; + struct zynqmp_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); + const struct zynqmp_pctrl_group *pgrp = &pctrl->groups[selector]; + + for (i = 0; i < pgrp->npins; i++) { + ret = zynqmp_pinconf_cfg_set(pctldev, pgrp->pins[i], configs, + num_configs); + if (ret) + return ret; + } + + return 0; +} + +static const struct pinconf_ops zynqmp_pinconf_ops = { + .is_generic = true, + .pin_config_get = zynqmp_pinconf_cfg_get, + .pin_config_set = zynqmp_pinconf_cfg_set, + .pin_config_group_set = zynqmp_pinconf_group_set, +}; + +static struct pinctrl_desc zynqmp_desc = { + .name = "zynqmp_pinctrl", + .owner = THIS_MODULE, + .pctlops = &zynqmp_pctrl_ops, + .pmxops = &zynqmp_pinmux_ops, + .confops = &zynqmp_pinconf_ops, +#ifdef CONFIG_DEBUG_FS + .custom_conf_items = zynqmp_conf_items, +#endif +}; + +/** + * zynqmp_pinctrl_get_function_groups() - get groups for the function + * @fid: Function ID. + * @index: Group index. + * @groups: Groups data. + * + * Call firmware API to get groups for the given function. + * + * Return: 0 on success else error code. + */ +static int zynqmp_pinctrl_get_function_groups(u32 fid, u32 index, u16 *groups) +{ + struct zynqmp_pm_query_data qdata = {0}; + u32 ret_payload[PAYLOAD_ARG_CNT]; + int ret; + + qdata.qid = PM_QID_PINCTRL_GET_FUNCTION_GROUPS; + qdata.arg1 = fid; + qdata.arg2 = index; + + ret = zynqmp_pm_query_data(qdata, ret_payload); + if (ret) + return ret; + + memcpy(groups, &ret_payload[1], PINCTRL_GET_FUNC_GROUPS_RESP_LEN); + + return ret; +} + +/** + * zynqmp_pinctrl_get_func_num_groups() - get number of groups in function + * @fid: Function ID. + * @ngroups: Number of groups in function. + * + * Call firmware API to get number of group in function. + * + * Return: 0 on success else error code. + */ +static int zynqmp_pinctrl_get_func_num_groups(u32 fid, unsigned int *ngroups) +{ + struct zynqmp_pm_query_data qdata = {0}; + u32 ret_payload[PAYLOAD_ARG_CNT]; + int ret; + + qdata.qid = PM_QID_PINCTRL_GET_NUM_FUNCTION_GROUPS; + qdata.arg1 = fid; + + ret = zynqmp_pm_query_data(qdata, ret_payload); + if (ret) + return ret; + + *ngroups = ret_payload[1]; + + return ret; +} + +/** + * zynqmp_pinctrl_prepare_func_groups() - prepare function and groups data + * @dev: Device pointer. + * @fid: Function ID. + * @func: Function data. + * @groups: Groups data. + * + * Query firmware to get group IDs for each function. Firmware returns + * group IDs. Based on gorup index for the function, group names in + * function are stored. For example, first gorup in "eth0" function + * is named as "eth0_0", second as "eth0_1" and so on. + * + * Based on group ID received from firmware, function stores name of + * group for that group ID. For an example, if "eth0" first group ID + * is x, groups[x] name will be stored as "eth0_0". + * + * Once done for each function, each function would have its group names, + * and each groups would also have their names. + * + * Return: 0 on success else error code. + */ +static int zynqmp_pinctrl_prepare_func_groups(struct device *dev, u32 fid, + struct zynqmp_pmux_function *func, + struct zynqmp_pctrl_group *groups) +{ + u16 resp[NUM_GROUPS_PER_RESP] = {0}; + const char **fgroups; + int ret = 0, index, i; + + fgroups = devm_kzalloc(dev, sizeof(*fgroups) * func->ngroups, + GFP_KERNEL); + if (!fgroups) + return -ENOMEM; + + for (index = 0; index < func->ngroups; index += NUM_GROUPS_PER_RESP) { + ret = zynqmp_pinctrl_get_function_groups(fid, index, resp); + if (ret) + return ret; + + for (i = 0; i < NUM_GROUPS_PER_RESP; i++) { + if (resp[i] == (u16)NA_GROUP) + goto done; + + if (resp[i] == (u16)RESERVED_GROUP) + continue; + + fgroups[index + i] = devm_kasprintf(dev, GFP_KERNEL, + "%s_%d_grp", + func->name, + index + i); + groups[resp[i]].name = devm_kasprintf(dev, GFP_KERNEL, + "%s_%d_grp", + func->name, + index + i); + } + } +done: + func->groups = fgroups; + + return ret; +} + +/** + * zynqmp_pinctrl_get_function_name() - get function name + * @fid: Function ID. + * @name: Function name + * + * Call firmware API to get name of given function. + * + * Return: 0 on success else error code. + */ +static int zynqmp_pinctrl_get_function_name(u32 fid, char *name) +{ + struct zynqmp_pm_query_data qdata = {0}; + u32 ret_payload[PAYLOAD_ARG_CNT]; + + qdata.qid = PM_QID_PINCTRL_GET_FUNCTION_NAME; + qdata.arg1 = fid; + + zynqmp_pm_query_data(qdata, ret_payload); + memcpy(name, ret_payload, PINCTRL_GET_FUNC_NAME_RESP_LEN); + + return 0; +} + +/** + * zynqmp_pinctrl_get_num_functions() - get number of supported functions + * @nfuncs: Number of functions. + * + * Call firmware API to get number of functions supported by system/board. + * + * Return: 0 on success else error code. + */ +static int zynqmp_pinctrl_get_num_functions(unsigned int *nfuncs) +{ + struct zynqmp_pm_query_data qdata = {0}; + u32 ret_payload[PAYLOAD_ARG_CNT]; + int ret; + + qdata.qid = PM_QID_PINCTRL_GET_NUM_FUNCTIONS; + + ret = zynqmp_pm_query_data(qdata, ret_payload); + if (ret) + return ret; + + *nfuncs = ret_payload[1]; + + return ret; +} + +/** + * zynqmp_pinctrl_get_pin_groups() - get groups for the pin + * @pin: Pin number. + * @index: Group index. + * @groups: Groups data. + * + * Call firmware API to get groups for the given pin. + * + * Return: 0 on success else error code. + */ +static int zynqmp_pinctrl_get_pin_groups(u32 pin, u32 index, u16 *groups) +{ + struct zynqmp_pm_query_data qdata = {0}; + u32 ret_payload[PAYLOAD_ARG_CNT]; + int ret; + + qdata.qid = PM_QID_PINCTRL_GET_PIN_GROUPS; + qdata.arg1 = pin; + qdata.arg2 = index; + + ret = zynqmp_pm_query_data(qdata, ret_payload); + if (ret) + return ret; + + memcpy(groups, &ret_payload[1], PINCTRL_GET_PIN_GROUPS_RESP_LEN); + + return ret; +} + +/** + * zynqmp_pinctrl_group_add_pin() - add pin to given group + * @group: Group data. + * @pin: Pin number. + * + * Add pin number to respective group's pin array at end and + * increment pin count for the group. + * + * Return: 0 on success else error code. + */ +static void zynqmp_pinctrl_group_add_pin(struct zynqmp_pctrl_group *group, + unsigned int pin) +{ + group->pins[group->npins++] = pin; +} + +/** + * zynqmp_pinctrl_create_pin_groups() - assign pins to respective groups + * @dev: Device pointer. + * @groups: Groups data. + * @pin: Pin number. + * + * Query firmware to get groups available for the given pin. + * Based on firmware response(group IDs for the pin), add + * pin number to respective group's pin array. + * + * Once all pins are queries, each groups would have its number + * of pins and pin numbers data. + * + * Return: 0 on success else error code. + */ +static int zynqmp_pinctrl_create_pin_groups(struct device *dev, + struct zynqmp_pctrl_group *groups, + unsigned int pin) +{ + int ret, i, index = 0; + u16 resp[NUM_GROUPS_PER_RESP] = {0}; + + do { + ret = zynqmp_pinctrl_get_pin_groups(pin, index, resp); + if (ret) + return ret; + + for (i = 0; i < NUM_GROUPS_PER_RESP; i++) { + if (resp[i] == (u16)NA_GROUP) + return ret; + + if (resp[i] == (u16)RESERVED_GROUP) + continue; + + zynqmp_pinctrl_group_add_pin(&groups[resp[i]], pin); + } + index += NUM_GROUPS_PER_RESP; + } while (1); + + return ret; +} + +/** + * zynqmp_pinctrl_prepare_group_pins() - prepare each group's pin data + * @dev: Device pointer. + * @groups: Groups data. + * @ngroups: Number of groups. + * + * Prepare pin number and number of pins data for each pins. + * + * Return: 0 on success else error code. + */ +static int zynqmp_pinctrl_prepare_group_pins(struct device *dev, + struct zynqmp_pctrl_group *groups, + unsigned int ngroups) +{ + unsigned int pin; + int ret = 0; + + for (pin = 0; pin < zynqmp_desc.npins; pin++) { + ret = zynqmp_pinctrl_create_pin_groups(dev, groups, pin); + if (ret) + return ret; + } + + return ret; +} + +/** + * zynqmp_pinctrl_prepare_function_info() - prepare function info + * @dev: Device pointer. + * @pctrl: Pin control driver data. + * + * Query firmware for functions, groups and pin information and + * prepare pin control driver data. + * + * Query number of functions and number of function groups (number + * of groups in given function) to allocate required memory buffers + * for functions and groups. Once buffers are allocated to store + * functions and groups data, query and store required information + * (numbe of groups and group names for each function, number of + * pins and pin numbers for each group). + * + * Return: 0 on success else error code. + */ +static int zynqmp_pinctrl_prepare_function_info(struct device *dev, + struct zynqmp_pinctrl *pctrl) +{ + struct zynqmp_pmux_function *funcs; + struct zynqmp_pctrl_group *groups; + int ret, i; + + ret = zynqmp_pinctrl_get_num_functions(&pctrl->nfuncs); + if (ret) + return ret; + + funcs = devm_kzalloc(dev, sizeof(*funcs) * pctrl->nfuncs, GFP_KERNEL); + if (!funcs) + return -ENOMEM; + + for (i = 0; i < pctrl->nfuncs; i++) { + zynqmp_pinctrl_get_function_name(i, funcs[i].name); + + ret = zynqmp_pinctrl_get_func_num_groups(i, &funcs[i].ngroups); + if (ret) + return ret; + + pctrl->ngroups += funcs[i].ngroups; + } + + groups = devm_kzalloc(dev, sizeof(*groups) * pctrl->ngroups, + GFP_KERNEL); + if (!groups) + return -ENOMEM; + + for (i = 0; i < pctrl->nfuncs; i++) { + ret = zynqmp_pinctrl_prepare_func_groups(dev, i, &funcs[i], + groups); + if (ret) + return ret; + } + + ret = zynqmp_pinctrl_prepare_group_pins(dev, groups, pctrl->ngroups); + if (ret) + return ret; + + pctrl->funcs = funcs; + pctrl->groups = groups; + + return ret; +} + +/** + * zynqmp_pinctrl_get_num_pins() - get number of pins in system + * @npins: Number of pins in system/board. + * + * Call firmware API to get number of pins. + * + * Return: 0 on success else error code. + */ +static int zynqmp_pinctrl_get_num_pins(unsigned int *npins) +{ + struct zynqmp_pm_query_data qdata = {0}; + u32 ret_payload[PAYLOAD_ARG_CNT]; + int ret; + + qdata.qid = PM_QID_PINCTRL_GET_NUM_PINS; + + ret = zynqmp_pm_query_data(qdata, ret_payload); + if (ret) + return ret; + + *npins = ret_payload[1]; + + return ret; +} + +/** + * zynqmp_pinctrl_prepare_pin_desc() - prepare pin description info + * @dev: Device pointer. + * @zynqmp_pins: Pin information. + * @npins: Number of pins. + * + * Query number of pins information from firmware and prepare pin + * description containing pin number and pin name. + * + * Return: 0 on success else error code. + */ +static int zynqmp_pinctrl_prepare_pin_desc(struct device *dev, + const struct pinctrl_pin_desc + **zynqmp_pins, + unsigned int *npins) +{ + struct pinctrl_pin_desc *pins, *pin; + int ret; + int i; + + ret = zynqmp_pinctrl_get_num_pins(npins); + if (ret) + return ret; + + pins = devm_kzalloc(dev, sizeof(*pins) * *npins, GFP_KERNEL); + if (!pins) + return -ENOMEM; + + for (i = 0; i < *npins; i++) { + pin = &pins[i]; + pin->number = i; + pin->name = devm_kasprintf(dev, GFP_KERNEL, "%s%d", + ZYNQMP_PIN_PREFIX, i); + } + + *zynqmp_pins = pins; + + return 0; +} + +static int zynqmp_pinctrl_probe(struct platform_device *pdev) +{ + struct zynqmp_pinctrl *pctrl; + int ret; + + pctrl = devm_kzalloc(&pdev->dev, sizeof(*pctrl), GFP_KERNEL); + if (!pctrl) + return -ENOMEM; + + ret = zynqmp_pinctrl_prepare_pin_desc(&pdev->dev, + &zynqmp_desc.pins, + &zynqmp_desc.npins); + if (ret) { + dev_err(&pdev->dev, "%s() pin desc prepare fail with %d\n", + __func__, ret); + return ret; + } + + ret = zynqmp_pinctrl_prepare_function_info(&pdev->dev, pctrl); + if (ret) { + dev_err(&pdev->dev, "%s() function info prepare fail with %d\n", + __func__, ret); + return ret; + } + + pctrl->pctrl = pinctrl_register(&zynqmp_desc, &pdev->dev, pctrl); + if (IS_ERR(pctrl->pctrl)) { + ret = PTR_ERR(pctrl->pctrl); + return ret; + } + + platform_set_drvdata(pdev, pctrl); + + dev_info(&pdev->dev, "zynqmp pinctrl initialized\n"); + + return ret; +} + +static const struct of_device_id zynqmp_pinctrl_of_match[] = { + { .compatible = "xlnx,zynqmp-pinctrl" }, + { } +}; + +static struct platform_driver zynqmp_pinctrl_driver = { + .driver = { + .name = "zynqmp-pinctrl", + .of_match_table = zynqmp_pinctrl_of_match, + }, + .probe = zynqmp_pinctrl_probe, +}; +builtin_platform_driver(zynqmp_pinctrl_driver);