diff mbox

[v2] mmc: core: restore detect line inversion semantics

Message ID 1412149918-25648-1-git-send-email-linus.walleij@linaro.org
State New
Headers show

Commit Message

Linus Walleij Oct. 1, 2014, 7:51 a.m. UTC
commit 98e90de99a0c43bd434da814c882c4332441871e
"mmc: host: switch OF parser to use gpio descriptors"
switched the semantic behaviour of card detect and read
only flags such that the inversion capability flag would
only be set if inversion was explicitly specified in the
device tree, in the hopes that no-one was using double
inversion.

It turns out that the XOR:ing between the explicit
inversion was indeed in use, so we need to restore the
old semantics where both ways of inversion are checked
and the end result XOR:ed.

Reported-by: Javier Martinez Canillas <javier@dowhile0.org>
Tested-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v1->v2:
- Always set override_active_level when getting CD GPIO
- Invert the return value from gpiod_is_active_low() to
  follow the old semantics
---
 drivers/mmc/core/host.c       | 32 ++++++++++++++++++++++++++++----
 drivers/mmc/core/slot-gpio.c  | 10 ++++++++--
 drivers/mmc/host/mmci.c       |  5 +++--
 include/linux/mmc/slot-gpio.h |  4 ++--
 4 files changed, 41 insertions(+), 10 deletions(-)

Comments

Ulf Hansson Oct. 1, 2014, 8:24 a.m. UTC | #1
On 1 October 2014 09:51, Linus Walleij <linus.walleij@linaro.org> wrote:
> commit 98e90de99a0c43bd434da814c882c4332441871e
> "mmc: host: switch OF parser to use gpio descriptors"
> switched the semantic behaviour of card detect and read
> only flags such that the inversion capability flag would
> only be set if inversion was explicitly specified in the
> device tree, in the hopes that no-one was using double
> inversion.
>
> It turns out that the XOR:ing between the explicit
> inversion was indeed in use, so we need to restore the
> old semantics where both ways of inversion are checked
> and the end result XOR:ed.
>
> Reported-by: Javier Martinez Canillas <javier@dowhile0.org>
> Tested-by: Javier Martinez Canillas <javier@dowhile0.org>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> ChangeLog v1->v2:
> - Always set override_active_level when getting CD GPIO
> - Invert the return value from gpiod_is_active_low() to
>   follow the old semantics
> ---
>  drivers/mmc/core/host.c       | 32 ++++++++++++++++++++++++++++----
>  drivers/mmc/core/slot-gpio.c  | 10 ++++++++--
>  drivers/mmc/host/mmci.c       |  5 +++--
>  include/linux/mmc/slot-gpio.h |  4 ++--
>  4 files changed, 41 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
> index 31969436d77c..03c53b72a2d6 100644
> --- a/drivers/mmc/core/host.c
> +++ b/drivers/mmc/core/host.c
> @@ -311,6 +311,7 @@ int mmc_of_parse(struct mmc_host *host)
>         struct device_node *np;
>         u32 bus_width;
>         int len, ret;
> +       bool cap_invert, gpio_invert;
>
>         if (!host->parent || !host->parent->of_node)
>                 return 0;
> @@ -359,12 +360,15 @@ int mmc_of_parse(struct mmc_host *host)
>                 host->caps |= MMC_CAP_NONREMOVABLE;
>         } else {
>                 if (of_property_read_bool(np, "cd-inverted"))
> -                       host->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
> +                       cap_invert = true;
> +               else
> +                       cap_invert = false;
>
>                 if (of_find_property(np, "broken-cd", &len))
>                         host->caps |= MMC_CAP_NEEDS_POLL;
>
> -               ret = mmc_gpiod_request_cd(host, "cd", 0, false, 0);
> +               ret = mmc_gpiod_request_cd(host, "cd", 0, true,
> +                                          0, &gpio_invert);
>                 if (ret) {
>                         if (ret == -EPROBE_DEFER)
>                                 return ret;
> @@ -375,13 +379,29 @@ int mmc_of_parse(struct mmc_host *host)
>                         }
>                 } else
>                         dev_info(host->parent, "Got CD GPIO\n");
> +
> +               /*
> +                * There are two ways to flag that the CD line is inverted:
> +                * through the cd-inverted flag and by the GPIO line itself
> +                * being inverted from the GPIO subsystem. This is a leftover
> +                * from the times when the GPIO subsystem did not make it
> +                * possible to flag a line as inverted.
> +                *
> +                * If the capability on the host AND the GPIO line are
> +                * both inverted, the end result is that the CD line is
> +                * not inverted.
> +                */
> +               if (cap_invert ^ gpio_invert)
> +                       host->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
>         }
>
>         /* Parse Write Protection */
>         if (of_property_read_bool(np, "wp-inverted"))
> -               host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
> +               cap_invert = true;
> +       else
> +               cap_invert = false;
>
> -       ret = mmc_gpiod_request_ro(host, "wp", 0, false, 0);
> +       ret = mmc_gpiod_request_ro(host, "wp", 0, false, 0, &gpio_invert);
>         if (ret) {
>                 if (ret == -EPROBE_DEFER)
>                         goto out;
> @@ -393,6 +413,10 @@ int mmc_of_parse(struct mmc_host *host)
>         } else
>                 dev_info(host->parent, "Got WP GPIO\n");
>
> +       /* See the comment on CD inversion above */
> +       if (cap_invert ^ gpio_invert)
> +               host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
> +
>         if (of_find_property(np, "cap-sd-highspeed", &len))
>                 host->caps |= MMC_CAP_SD_HIGHSPEED;
>         if (of_find_property(np, "cap-mmc-highspeed", &len))
> diff --git a/drivers/mmc/core/slot-gpio.c b/drivers/mmc/core/slot-gpio.c
> index 38f76555d4bf..411f643fa369 100644
> --- a/drivers/mmc/core/slot-gpio.c
> +++ b/drivers/mmc/core/slot-gpio.c
> @@ -281,6 +281,7 @@ EXPORT_SYMBOL(mmc_gpio_free_cd);
>   * @idx: index of the GPIO to obtain in the consumer
>   * @override_active_level: ignore %GPIO_ACTIVE_LOW flag
>   * @debounce: debounce time in microseconds
> + * @gpio_invert: will return whether the GPIO line is inverted or not
>   *
>   * Use this function in place of mmc_gpio_request_cd() to use the GPIO
>   * descriptor API.  Note that it is paired with mmc_gpiod_free_cd() not
> @@ -291,7 +292,7 @@ EXPORT_SYMBOL(mmc_gpio_free_cd);
>   */
>  int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id,
>                          unsigned int idx, bool override_active_level,
> -                        unsigned int debounce)
> +                        unsigned int debounce, bool *gpio_invert)
>  {
>         struct mmc_gpio *ctx;
>         struct gpio_desc *desc;
> @@ -316,6 +317,8 @@ int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id,
>                         return ret;
>         }
>
> +       *gpio_invert = !gpiod_is_active_low(desc);
> +

May I suggest to add "if (!gpio_invert)" before assigning the value to it.

That means callers of this function gets to decide whether the result
of gpio_invert is interesting. Those that think not, can provide
"NULL".

Kind regards
Uffe


>         ctx->override_cd_active_level = override_active_level;
>         ctx->cd_gpio = desc;
>
> @@ -330,6 +333,7 @@ EXPORT_SYMBOL(mmc_gpiod_request_cd);
>   * @idx: index of the GPIO to obtain in the consumer
>   * @override_active_level: ignore %GPIO_ACTIVE_LOW flag
>   * @debounce: debounce time in microseconds
> + * @gpio_invert: will return whether the GPIO line is inverted or not
>   *
>   * Use this function in place of mmc_gpio_request_ro() to use the GPIO
>   * descriptor API.  Note that it is paired with mmc_gpiod_free_ro() not
> @@ -339,7 +343,7 @@ EXPORT_SYMBOL(mmc_gpiod_request_cd);
>   */
>  int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id,
>                          unsigned int idx, bool override_active_level,
> -                        unsigned int debounce)
> +                        unsigned int debounce, bool *gpio_invert)
>  {
>         struct mmc_gpio *ctx;
>         struct gpio_desc *desc;
> @@ -364,6 +368,8 @@ int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id,
>                         return ret;
>         }
>
> +       *gpio_invert = !gpiod_is_active_low(desc);
> +
>         ctx->override_ro_active_level = override_active_level;
>         ctx->ro_gpio = desc;
>
> diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
> index c9dafed550f2..5c9f2d543144 100644
> --- a/drivers/mmc/host/mmci.c
> +++ b/drivers/mmc/host/mmci.c
> @@ -1512,6 +1512,7 @@ static int mmci_probe(struct amba_device *dev,
>         struct variant_data *variant = id->data;
>         struct mmci_host *host;
>         struct mmc_host *mmc;
> +       bool dummy;
>         int ret;
>
>         /* Must have platform data or Device Tree. */
> @@ -1682,7 +1683,7 @@ static int mmci_probe(struct amba_device *dev,
>          * silently of these do not exist and proceed to try platform data
>          */
>         if (!np) {
> -               ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0);
> +               ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0, &dummy);
>                 if (ret < 0) {
>                         if (ret == -EPROBE_DEFER)
>                                 goto clk_disable;
> @@ -1693,7 +1694,7 @@ static int mmci_probe(struct amba_device *dev,
>                         }
>                 }
>
> -               ret = mmc_gpiod_request_ro(mmc, "wp", 0, false, 0);
> +               ret = mmc_gpiod_request_ro(mmc, "wp", 0, false, 0, &dummy);
>                 if (ret < 0) {
>                         if (ret == -EPROBE_DEFER)
>                                 goto clk_disable;
> diff --git a/include/linux/mmc/slot-gpio.h b/include/linux/mmc/slot-gpio.h
> index a0d0442c15bf..e56fa24c9322 100644
> --- a/include/linux/mmc/slot-gpio.h
> +++ b/include/linux/mmc/slot-gpio.h
> @@ -24,10 +24,10 @@ void mmc_gpio_free_cd(struct mmc_host *host);
>
>  int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id,
>                          unsigned int idx, bool override_active_level,
> -                        unsigned int debounce);
> +                        unsigned int debounce, bool *gpio_invert);
>  int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id,
>                          unsigned int idx, bool override_active_level,
> -                        unsigned int debounce);
> +                        unsigned int debounce, bool *gpio_invert);
>  void mmc_gpiod_free_cd(struct mmc_host *host);
>  void mmc_gpiod_request_cd_irq(struct mmc_host *host);
>
> --
> 1.9.3
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 31969436d77c..03c53b72a2d6 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -311,6 +311,7 @@  int mmc_of_parse(struct mmc_host *host)
 	struct device_node *np;
 	u32 bus_width;
 	int len, ret;
+	bool cap_invert, gpio_invert;
 
 	if (!host->parent || !host->parent->of_node)
 		return 0;
@@ -359,12 +360,15 @@  int mmc_of_parse(struct mmc_host *host)
 		host->caps |= MMC_CAP_NONREMOVABLE;
 	} else {
 		if (of_property_read_bool(np, "cd-inverted"))
-			host->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
+			cap_invert = true;
+		else
+			cap_invert = false;
 
 		if (of_find_property(np, "broken-cd", &len))
 			host->caps |= MMC_CAP_NEEDS_POLL;
 
-		ret = mmc_gpiod_request_cd(host, "cd", 0, false, 0);
+		ret = mmc_gpiod_request_cd(host, "cd", 0, true,
+					   0, &gpio_invert);
 		if (ret) {
 			if (ret == -EPROBE_DEFER)
 				return ret;
@@ -375,13 +379,29 @@  int mmc_of_parse(struct mmc_host *host)
 			}
 		} else
 			dev_info(host->parent, "Got CD GPIO\n");
+
+		/*
+		 * There are two ways to flag that the CD line is inverted:
+		 * through the cd-inverted flag and by the GPIO line itself
+		 * being inverted from the GPIO subsystem. This is a leftover
+		 * from the times when the GPIO subsystem did not make it
+		 * possible to flag a line as inverted.
+		 *
+		 * If the capability on the host AND the GPIO line are
+		 * both inverted, the end result is that the CD line is
+		 * not inverted.
+		 */
+		if (cap_invert ^ gpio_invert)
+			host->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
 	}
 
 	/* Parse Write Protection */
 	if (of_property_read_bool(np, "wp-inverted"))
-		host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
+		cap_invert = true;
+	else
+		cap_invert = false;
 
-	ret = mmc_gpiod_request_ro(host, "wp", 0, false, 0);
+	ret = mmc_gpiod_request_ro(host, "wp", 0, false, 0, &gpio_invert);
 	if (ret) {
 		if (ret == -EPROBE_DEFER)
 			goto out;
@@ -393,6 +413,10 @@  int mmc_of_parse(struct mmc_host *host)
 	} else
 		dev_info(host->parent, "Got WP GPIO\n");
 
+	/* See the comment on CD inversion above */
+	if (cap_invert ^ gpio_invert)
+		host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
+
 	if (of_find_property(np, "cap-sd-highspeed", &len))
 		host->caps |= MMC_CAP_SD_HIGHSPEED;
 	if (of_find_property(np, "cap-mmc-highspeed", &len))
diff --git a/drivers/mmc/core/slot-gpio.c b/drivers/mmc/core/slot-gpio.c
index 38f76555d4bf..411f643fa369 100644
--- a/drivers/mmc/core/slot-gpio.c
+++ b/drivers/mmc/core/slot-gpio.c
@@ -281,6 +281,7 @@  EXPORT_SYMBOL(mmc_gpio_free_cd);
  * @idx: index of the GPIO to obtain in the consumer
  * @override_active_level: ignore %GPIO_ACTIVE_LOW flag
  * @debounce: debounce time in microseconds
+ * @gpio_invert: will return whether the GPIO line is inverted or not
  *
  * Use this function in place of mmc_gpio_request_cd() to use the GPIO
  * descriptor API.  Note that it is paired with mmc_gpiod_free_cd() not
@@ -291,7 +292,7 @@  EXPORT_SYMBOL(mmc_gpio_free_cd);
  */
 int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id,
 			 unsigned int idx, bool override_active_level,
-			 unsigned int debounce)
+			 unsigned int debounce, bool *gpio_invert)
 {
 	struct mmc_gpio *ctx;
 	struct gpio_desc *desc;
@@ -316,6 +317,8 @@  int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id,
 			return ret;
 	}
 
+	*gpio_invert = !gpiod_is_active_low(desc);
+
 	ctx->override_cd_active_level = override_active_level;
 	ctx->cd_gpio = desc;
 
@@ -330,6 +333,7 @@  EXPORT_SYMBOL(mmc_gpiod_request_cd);
  * @idx: index of the GPIO to obtain in the consumer
  * @override_active_level: ignore %GPIO_ACTIVE_LOW flag
  * @debounce: debounce time in microseconds
+ * @gpio_invert: will return whether the GPIO line is inverted or not
  *
  * Use this function in place of mmc_gpio_request_ro() to use the GPIO
  * descriptor API.  Note that it is paired with mmc_gpiod_free_ro() not
@@ -339,7 +343,7 @@  EXPORT_SYMBOL(mmc_gpiod_request_cd);
  */
 int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id,
 			 unsigned int idx, bool override_active_level,
-			 unsigned int debounce)
+			 unsigned int debounce, bool *gpio_invert)
 {
 	struct mmc_gpio *ctx;
 	struct gpio_desc *desc;
@@ -364,6 +368,8 @@  int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id,
 			return ret;
 	}
 
+	*gpio_invert = !gpiod_is_active_low(desc);
+
 	ctx->override_ro_active_level = override_active_level;
 	ctx->ro_gpio = desc;
 
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index c9dafed550f2..5c9f2d543144 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -1512,6 +1512,7 @@  static int mmci_probe(struct amba_device *dev,
 	struct variant_data *variant = id->data;
 	struct mmci_host *host;
 	struct mmc_host *mmc;
+	bool dummy;
 	int ret;
 
 	/* Must have platform data or Device Tree. */
@@ -1682,7 +1683,7 @@  static int mmci_probe(struct amba_device *dev,
 	 * silently of these do not exist and proceed to try platform data
 	 */
 	if (!np) {
-		ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0);
+		ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0, &dummy);
 		if (ret < 0) {
 			if (ret == -EPROBE_DEFER)
 				goto clk_disable;
@@ -1693,7 +1694,7 @@  static int mmci_probe(struct amba_device *dev,
 			}
 		}
 
-		ret = mmc_gpiod_request_ro(mmc, "wp", 0, false, 0);
+		ret = mmc_gpiod_request_ro(mmc, "wp", 0, false, 0, &dummy);
 		if (ret < 0) {
 			if (ret == -EPROBE_DEFER)
 				goto clk_disable;
diff --git a/include/linux/mmc/slot-gpio.h b/include/linux/mmc/slot-gpio.h
index a0d0442c15bf..e56fa24c9322 100644
--- a/include/linux/mmc/slot-gpio.h
+++ b/include/linux/mmc/slot-gpio.h
@@ -24,10 +24,10 @@  void mmc_gpio_free_cd(struct mmc_host *host);
 
 int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id,
 			 unsigned int idx, bool override_active_level,
-			 unsigned int debounce);
+			 unsigned int debounce, bool *gpio_invert);
 int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id,
 			 unsigned int idx, bool override_active_level,
-			 unsigned int debounce);
+			 unsigned int debounce, bool *gpio_invert);
 void mmc_gpiod_free_cd(struct mmc_host *host);
 void mmc_gpiod_request_cd_irq(struct mmc_host *host);