@@ -8,42 +8,8 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
common pinctrl bindings used by client devices, including the meaning of the
phrase "pin configuration node".
-ST Ericsson's pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as input, output, pull up, pull down...
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Required subnode-properties:
-- ste,pins : An array of strings. Each string contains the name of a pin or
- group.
-
-Optional subnode-properties:
-- ste,function: A string containing the name of the function to mux to the
- pin or group.
-
-- generic pin configuration option to use. Example :
-
- default_cfg {
- ste,pins = "GPIO1";
- bias-disable;
- };
-
-- ste,config: Handle of pin configuration node containing the generic
- pinconfig options to use, as described in pinctrl-bindings.txt in
- this directory. Example :
-
- pcfg_bias_disable: pcfg_bias_disable {
- bias-disable;
- };
-
- default_cfg {
- ste,pins = "GPIO1";
- ste.config = <&pcfg_bias_disable>;
- };
+ST Ericsson's pin configuration nodes use the generic pin multiplexing
+and pin configuration bindings, see pinctrl-bindings.txt
Example board file extract:
@@ -54,11 +20,11 @@ Example board file extract:
sysclkreq2 {
sysclkreq2_default_mode: sysclkreq2_default {
default_mux {
- ste,function = "sysclkreq";
- ste,pins = "sysclkreq2_d_1";
+ function = "sysclkreq";
+ groups = "sysclkreq2_d_1";
};
default_cfg {
- ste,pins = "GPIO1";
+ pins = "GPIO1";
bias-disable;
};
};
@@ -66,11 +32,11 @@ Example board file extract:
sysclkreq3 {
sysclkreq3_default_mode: sysclkreq3_default {
default_mux {
- ste,function = "sysclkreq";
- ste,pins = "sysclkreq3_d_1";
+ function = "sysclkreq";
+ groups = "sysclkreq3_d_1";
};
default_cfg {
- ste,pins = "GPIO2";
+ pins = "GPIO2";
output-low;
};
};
@@ -78,11 +44,11 @@ Example board file extract:
gpio3 {
gpio3_default_mode: gpio3_default {
default_mux {
- ste,function = "gpio";
- ste,pins = "gpio3_a_1";
+ function = "gpio";
+ groups = "gpio3_a_1";
};
default_cfg {
- ste,pins = "GPIO3";
+ pins = "GPIO3";
output-low;
};
};
@@ -90,11 +56,11 @@ Example board file extract:
sysclkreq6 {
sysclkreq6_default_mode: sysclkreq6_default {
default_mux {
- ste,function = "sysclkreq";
- ste,pins = "sysclkreq6_d_1";
+ function = "sysclkreq";
+ groups = "sysclkreq6_d_1";
};
default_cfg {
- ste,pins = "GPIO4";
+ pins = "GPIO4";
bias-disable;
};
};
@@ -102,11 +68,11 @@ Example board file extract:
pwmout1 {
pwmout1_default_mode: pwmout1_default {
default_mux {
- ste,function = "pwmout";
- ste,pins = "pwmout1_d_1";
+ function = "pwmout";
+ groups = "pwmout1_d_1";
};
default_cfg {
- ste,pins = "GPIO14";
+ pins = "GPIO14";
output-low;
};
};
@@ -114,11 +80,11 @@ Example board file extract:
pwmout2 {
pwmout2_default_mode: pwmout2_default {
pwmout2_default_mux {
- ste,function = "pwmout";
- ste,pins = "pwmout2_d_1";
+ function = "pwmout";
+ groups = "pwmout2_d_1";
};
pwmout2_default_cfg {
- ste,pins = "GPIO15";
+ pins = "GPIO15";
output-low;
};
};
@@ -126,11 +92,11 @@ Example board file extract:
pwmout3 {
pwmout3_default_mode: pwmout3_default {
pwmout3_default_mux {
- ste,function = "pwmout";
- ste,pins = "pwmout3_d_1";
+ function = "pwmout";
+ groups = "pwmout3_d_1";
};
pwmout3_default_cfg {
- ste,pins = "GPIO16";
+ pins = "GPIO16";
output-low;
};
};
@@ -139,15 +105,15 @@ Example board file extract:
adi1_default_mode: adi1_default {
adi1_default_mux {
- ste,function = "adi1";
- ste,pins = "adi1_d_1";
+ function = "adi1";
+ groups = "adi1_d_1";
};
adi1_default_cfg1 {
- ste,pins = "GPIO17","GPIO19","GPIO20";
+ pins = "GPIO17","GPIO19","GPIO20";
bias-disable;
};
adi1_default_cfg2 {
- ste,pins = "GPIO18";
+ pins = "GPIO18";
output-low;
};
};
@@ -155,15 +121,15 @@ Example board file extract:
dmic12 {
dmic12_default_mode: dmic12_default {
dmic12_default_mux {
- ste,function = "dmic";
- ste,pins = "dmic12_d_1";
+ function = "dmic";
+ groups = "dmic12_d_1";
};
dmic12_default_cfg1 {
- ste,pins = "GPIO27";
+ pins = "GPIO27";
output-low;
};
dmic12_default_cfg2 {
- ste,pins = "GPIO28";
+ pins = "GPIO28";
bias-disable;
};
};
@@ -171,15 +137,15 @@ Example board file extract:
dmic34 {
dmic34_default_mode: dmic34_default {
dmic34_default_mux {
- ste,function = "dmic";
- ste,pins = "dmic34_d_1";
+ function = "dmic";
+ groups = "dmic34_d_1";
};
dmic34_default_cfg1 {
- ste,pins = "GPIO29";
+ pins = "GPIO29";
output-low;
};
dmic34_default_cfg2 {
- ste,pins = "GPIO30";
+ pins = "GPIO30";
bias-disable;{
};
@@ -188,15 +154,15 @@ Example board file extract:
dmic56 {
dmic56_default_mode: dmic56_default {
dmic56_default_mux {
- ste,function = "dmic";
- ste,pins = "dmic56_d_1";
+ function = "dmic";
+ groups = "dmic56_d_1";
};
dmic56_default_cfg1 {
- ste,pins = "GPIO31";
+ pins = "GPIO31";
output-low;
};
dmic56_default_cfg2 {
- ste,pins = "GPIO32";
+ pins = "GPIO32";
bias-disable;
};
};
@@ -204,11 +170,11 @@ Example board file extract:
sysclkreq5 {
sysclkreq5_default_mode: sysclkreq5_default {
sysclkreq5_default_mux {
- ste,function = "sysclkreq";
- ste,pins = "sysclkreq5_d_1";
+ function = "sysclkreq";
+ groups = "sysclkreq5_d_1";
};
sysclkreq5_default_cfg {
- ste,pins = "GPIO42";
+ pins = "GPIO42";
output-low;
};
};
@@ -216,11 +182,11 @@ Example board file extract:
batremn {
batremn_default_mode: batremn_default {
batremn_default_mux {
- ste,function = "batremn";
- ste,pins = "batremn_d_1";
+ function = "batremn";
+ groups = "batremn_d_1";
};
batremn_default_cfg {
- ste,pins = "GPIO43";
+ pins = "GPIO43";
bias-disable;
};
};
@@ -228,11 +194,11 @@ Example board file extract:
service {
service_default_mode: service_default {
service_default_mux {
- ste,function = "service";
- ste,pins = "service_d_1";
+ function = "service";
+ groups = "service_d_1";
};
service_default_cfg {
- ste,pins = "GPIO44";
+ pins = "GPIO44";
bias-disable;
};
};
@@ -240,13 +206,13 @@ Example board file extract:
pwrctrl0 {
pwrctrl0_default_mux: pwrctrl0_mux {
pwrctrl0_default_mux {
- ste,function = "pwrctrl";
- ste,pins = "pwrctrl0_d_1";
+ function = "pwrctrl";
+ groups = "pwrctrl0_d_1";
};
};
pwrctrl0_default_mode: pwrctrl0_default {
pwrctrl0_default_cfg {
- ste,pins = "GPIO45";
+ pins = "GPIO45";
bias-disable;
};
};
@@ -254,13 +220,13 @@ Example board file extract:
pwrctrl1 {
pwrctrl1_default_mux: pwrctrl1_mux {
pwrctrl1_default_mux {
- ste,function = "pwrctrl";
- ste,pins = "pwrctrl1_d_1";
+ function = "pwrctrl";
+ groups = "pwrctrl1_d_1";
};
};
pwrctrl1_default_mode: pwrctrl1_default {
pwrctrl1_default_cfg {
- ste,pins = "GPIO46";
+ pins = "GPIO46";
bias-disable;
};
};
@@ -268,11 +234,11 @@ Example board file extract:
pwmextvibra1 {
pwmextvibra1_default_mode: pwmextvibra1_default {
pwmextvibra1_default_mux {
- ste,function = "pwmextvibra";
- ste,pins = "pwmextvibra1_d_1";
+ function = "pwmextvibra";
+ groups = "pwmextvibra1_d_1";
};
pwmextvibra1_default_cfg {
- ste,pins = "GPIO47";
+ pins = "GPIO47";
bias-disable;
};
};
@@ -280,11 +246,11 @@ Example board file extract:
pwmextvibra2 {
pwmextvibra2_default_mode: pwmextvibra2_default {
pwmextvibra2_default_mux {
- ste,function = "pwmextvibra";
- ste,pins = "pwmextvibra2_d_1";
+ function = "pwmextvibra";
+ groups = "pwmextvibra2_d_1";
};
pwmextvibra1_default_cfg {
- ste,pins = "GPIO48";
+ pins = "GPIO48";
bias-disable;
};
};
@@ -292,11 +258,11 @@ Example board file extract:
gpio51 {
gpio51_default_mode: gpio51_default {
gpio51_default_mux {
- ste,function = "gpio";
- ste,pins = "gpio51_a_1";
+ function = "gpio";
+ groups = "gpio51_a_1";
};
gpio51_default_cfg {
- ste,pins = "GPIO51";
+ pins = "GPIO51";
output-low;
};
};
@@ -304,11 +270,11 @@ Example board file extract:
gpio52 {
gpio52_default_mode: gpio52_default {
gpio52_default_mux {
- ste,function = "gpio";
- ste,pins = "gpio52_a_1";
+ function = "gpio";
+ groups = "gpio52_a_1";
};
gpio52_default_cfg {
- ste,pins = "GPIO52";
+ pins = "GPIO52";
bias-pull-down;
};
};
@@ -316,11 +282,11 @@ Example board file extract:
gpio53 {
gpio53_default_mode: gpio53_default {
gpio53_default_mux {
- ste,function = "gpio";
- ste,pins = "gpio53_a_1";
+ function = "gpio";
+ groups = "gpio53_a_1";
};
gpio53_default_cfg {
- ste,pins = "GPIO53";
+ pins = "GPIO53";
bias-pull-down;
};
};
@@ -328,11 +294,11 @@ Example board file extract:
gpio54 {
gpio54_default_mode: gpio54_default {
gpio54_default_mux {
- ste,function = "gpio";
- ste,pins = "gpio54_a_1";
+ function = "gpio";
+ groups = "gpio54_a_1";
};
gpio54_default_cfg {
- ste,pins = "GPIO54";
+ pins = "GPIO54";
output-low;
};
};
@@ -340,11 +306,11 @@ Example board file extract:
pdmclkdat {
pdmclkdat_default_mode: pdmclkdat_default {
pdmclkdat_default_mux {
- ste,function = "pdm";
- ste,pins = "pdmclkdat_d_1";
+ function = "pdm";
+ groups = "pdmclkdat_d_1";
};
pdmclkdat_default_cfg {
- ste,pins = "GPIO55", "GPIO56";
+ pins = "GPIO55", "GPIO56";
bias-disable;
};
};
After force converting the ABx500 bindings in the driver and device tree sources, also update the binding documentation to state that we are now using standard bindings. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- .../devicetree/bindings/pinctrl/ste,abx500.txt | 184 +++++++++------------ 1 file changed, 75 insertions(+), 109 deletions(-)