| Message ID | 20210217181157.28285-1-helen.koike@collabora.com |
|---|---|
| State | New |
| Headers | show |
| Series | test-media: wrap vivid code around $vivid variable | expand |
On 17/02/2021 19:11, Helen Koike wrote: > The script was trying to load vivid and run some commands on top of it > even when $vivid = 0. > Wrap all vivid code under $vivid variable. > > Signed-off-by: Helen Koike <helen.koike@collabora.com> > --- > contrib/test/test-media | 66 ++++++++++++++++++++--------------------- > 1 file changed, 33 insertions(+), 33 deletions(-) > > diff --git a/contrib/test/test-media b/contrib/test/test-media > index 10b7e89d..8cd8bc37 100755 > --- a/contrib/test/test-media > +++ b/contrib/test/test-media > @@ -146,29 +146,29 @@ if [ $kmemleak -eq 1 ]; then > echo clear >/sys/kernel/debug/kmemleak > fi > > -rmmod vivid 2&>/dev/null > -modprobe vivid n_devs=3 multiplanar=1,2,2 cache_hints=1,0,0 #allocators=0,1,1 Ah, no. Vivid is also used to test dmabuf for vim2m, vimc and vicodec tests. It functions as the allocator for the dma buffers in that case. So even if vivid isn't given, but only vim2m, vimc or vicodec, it should still be loaded. It isn't needed for vidtv, so I guess it could be disabled if only vidtv is tested. Regards, Hans > -sleep 1 > +if [ $vivid -eq 1 ]; then > + rmmod vivid 2&>/dev/null > + modprobe vivid n_devs=3 multiplanar=1,2,2 cache_hints=1,0,0 #allocators=0,1,1 > + sleep 1 > > -tmp=`mktemp` > + tmp=`mktemp` > > -if ! $v4l2_ctl -z platform:vivid-002 -d vivid-002-vid-cap ; then > - echo "FAIL: the vivid module failed to load" | tee -a $tmp > - echo "Grand Total for vivid: Succeeded: 0, Failed: 1, Warnings: 0" | tee -a $tmp > - echo "Final Summary: 1, Succeeded: 0, Failed: 1, Warnings: 0" > - exit 0 > -fi > + if ! $v4l2_ctl -z platform:vivid-002 -d vivid-002-vid-cap ; then > + echo "FAIL: the vivid module failed to load" | tee -a $tmp > + echo "Grand Total for vivid: Succeeded: 0, Failed: 1, Warnings: 0" | tee -a $tmp > + echo "Final Summary: 1, Succeeded: 0, Failed: 1, Warnings: 0" > + exit 0 > + fi > > -$v4l2_ctl -z platform:vivid-000 -d vivid-000-vid-cap -i3 -v width=3840,height=2160,pixelformat=NV24 > -$v4l2_ctl -z platform:vivid-000 -d vivid-000-vid-out -o1 -x width=3840,height=2160,pixelformat=NV24 > -$v4l2_ctl -z platform:vivid-001 -d vivid-001-vid-cap -i3 -v width=3840,height=2160,pixelformat=NM16 > -$v4l2_ctl -z platform:vivid-001 -d vivid-001-vid-out -o1 -x width=3840,height=2160,pixelformat=NM16 > -$v4l2_ctl -z platform:vivid-002 -d vivid-002-vid-cap -i3 -v width=3840,height=2160,pixelformat=NV24 > -$v4l2_ctl -z platform:vivid-002 -d vivid-002-vid-out -o1 -x width=3840,height=2160,pixelformat=NM16 > + $v4l2_ctl -z platform:vivid-000 -d vivid-000-vid-cap -i3 -v width=3840,height=2160,pixelformat=NV24 > + $v4l2_ctl -z platform:vivid-000 -d vivid-000-vid-out -o1 -x width=3840,height=2160,pixelformat=NV24 > + $v4l2_ctl -z platform:vivid-001 -d vivid-001-vid-cap -i3 -v width=3840,height=2160,pixelformat=NM16 > + $v4l2_ctl -z platform:vivid-001 -d vivid-001-vid-out -o1 -x width=3840,height=2160,pixelformat=NM16 > + $v4l2_ctl -z platform:vivid-002 -d vivid-002-vid-cap -i3 -v width=3840,height=2160,pixelformat=NV24 > + $v4l2_ctl -z platform:vivid-002 -d vivid-002-vid-out -o1 -x width=3840,height=2160,pixelformat=NM16 > > -echo > + echo > > -if [ $vivid -eq 1 ]; then > dmesg -n notice > echo > echo vivid compliance tests, contiguous planes | tee /dev/kmsg > @@ -287,6 +287,18 @@ if [ $vivid -eq 1 ]; then > echo > echo > echo > + > + date > + echo > + echo unbind vivid | tee /dev/kmsg > + echo > + echo -n vivid.0 >/sys/bus/platform/drivers/vivid/unbind > + sleep $unbind_time > + echo > + echo rmmod vivid | tee /dev/kmsg > + echo > + rmmod vivid > + sleep $rmmod_time > fi > > if [ $vim2m -eq 1 ]; then > @@ -300,7 +312,7 @@ if [ $vim2m -eq 1 ]; then > echo "FAIL: the vim2m module failed to load" | tee -a $tmp > echo "Grand Total for vim2m: Succeeded: 0, Failed: 1, Warnings: 0" | tee -a $tmp > echo "Final Summary: 1, Succeeded: 0, Failed: 1, Warnings: 0" > - rmmod vivid > + rmmod vim2m > exit 0 > fi > > @@ -373,7 +385,7 @@ if [ $vimc -eq 1 ]; then > echo "FAIL: the vimc module failed to load" | tee -a $tmp > echo "Grand Total for vimc: Succeeded: 0, Failed: 1, Warnings: 0" | tee -a $tmp > echo "Final Summary: 1, Succeeded: 0, Failed: 1, Warnings: 0" > - rmmod vivid > + rmmod vimc > exit 0 > fi > > @@ -467,7 +479,7 @@ if [ $vicodec -eq 1 ]; then > echo "FAIL: the vicodec module failed to load" | tee -a $tmp > echo "Grand Total for vicodec: Succeeded: 0, Failed: 1, Warnings: 0" | tee -a $tmp > echo "Final Summary: 1, Succeeded: 0, Failed: 1, Warnings: 0" > - rmmod vivid > + rmmod vicodec > exit 0 > fi > > @@ -603,18 +615,6 @@ if [ $vicodec -eq 1 ]; then > echo > fi > > -date > -echo > -echo unbind vivid | tee /dev/kmsg > -echo > -echo -n vivid.0 >/sys/bus/platform/drivers/vivid/unbind > -sleep $unbind_time > -echo > -echo rmmod vivid | tee /dev/kmsg > -echo > -rmmod vivid > -sleep $rmmod_time > - > if [ $vidtv -eq 1 ]; then > rmmod dvb_vidtv_bridge dvb_vidtv_tuner dvb_vidtv_demod 2&>/dev/null > modprobe vidtv >
diff --git a/contrib/test/test-media b/contrib/test/test-media index 10b7e89d..8cd8bc37 100755 --- a/contrib/test/test-media +++ b/contrib/test/test-media @@ -146,29 +146,29 @@ if [ $kmemleak -eq 1 ]; then echo clear >/sys/kernel/debug/kmemleak fi -rmmod vivid 2&>/dev/null -modprobe vivid n_devs=3 multiplanar=1,2,2 cache_hints=1,0,0 #allocators=0,1,1 -sleep 1 +if [ $vivid -eq 1 ]; then + rmmod vivid 2&>/dev/null + modprobe vivid n_devs=3 multiplanar=1,2,2 cache_hints=1,0,0 #allocators=0,1,1 + sleep 1 -tmp=`mktemp` + tmp=`mktemp` -if ! $v4l2_ctl -z platform:vivid-002 -d vivid-002-vid-cap ; then - echo "FAIL: the vivid module failed to load" | tee -a $tmp - echo "Grand Total for vivid: Succeeded: 0, Failed: 1, Warnings: 0" | tee -a $tmp - echo "Final Summary: 1, Succeeded: 0, Failed: 1, Warnings: 0" - exit 0 -fi + if ! $v4l2_ctl -z platform:vivid-002 -d vivid-002-vid-cap ; then + echo "FAIL: the vivid module failed to load" | tee -a $tmp + echo "Grand Total for vivid: Succeeded: 0, Failed: 1, Warnings: 0" | tee -a $tmp + echo "Final Summary: 1, Succeeded: 0, Failed: 1, Warnings: 0" + exit 0 + fi -$v4l2_ctl -z platform:vivid-000 -d vivid-000-vid-cap -i3 -v width=3840,height=2160,pixelformat=NV24 -$v4l2_ctl -z platform:vivid-000 -d vivid-000-vid-out -o1 -x width=3840,height=2160,pixelformat=NV24 -$v4l2_ctl -z platform:vivid-001 -d vivid-001-vid-cap -i3 -v width=3840,height=2160,pixelformat=NM16 -$v4l2_ctl -z platform:vivid-001 -d vivid-001-vid-out -o1 -x width=3840,height=2160,pixelformat=NM16 -$v4l2_ctl -z platform:vivid-002 -d vivid-002-vid-cap -i3 -v width=3840,height=2160,pixelformat=NV24 -$v4l2_ctl -z platform:vivid-002 -d vivid-002-vid-out -o1 -x width=3840,height=2160,pixelformat=NM16 + $v4l2_ctl -z platform:vivid-000 -d vivid-000-vid-cap -i3 -v width=3840,height=2160,pixelformat=NV24 + $v4l2_ctl -z platform:vivid-000 -d vivid-000-vid-out -o1 -x width=3840,height=2160,pixelformat=NV24 + $v4l2_ctl -z platform:vivid-001 -d vivid-001-vid-cap -i3 -v width=3840,height=2160,pixelformat=NM16 + $v4l2_ctl -z platform:vivid-001 -d vivid-001-vid-out -o1 -x width=3840,height=2160,pixelformat=NM16 + $v4l2_ctl -z platform:vivid-002 -d vivid-002-vid-cap -i3 -v width=3840,height=2160,pixelformat=NV24 + $v4l2_ctl -z platform:vivid-002 -d vivid-002-vid-out -o1 -x width=3840,height=2160,pixelformat=NM16 -echo + echo -if [ $vivid -eq 1 ]; then dmesg -n notice echo echo vivid compliance tests, contiguous planes | tee /dev/kmsg @@ -287,6 +287,18 @@ if [ $vivid -eq 1 ]; then echo echo echo + + date + echo + echo unbind vivid | tee /dev/kmsg + echo + echo -n vivid.0 >/sys/bus/platform/drivers/vivid/unbind + sleep $unbind_time + echo + echo rmmod vivid | tee /dev/kmsg + echo + rmmod vivid + sleep $rmmod_time fi if [ $vim2m -eq 1 ]; then @@ -300,7 +312,7 @@ if [ $vim2m -eq 1 ]; then echo "FAIL: the vim2m module failed to load" | tee -a $tmp echo "Grand Total for vim2m: Succeeded: 0, Failed: 1, Warnings: 0" | tee -a $tmp echo "Final Summary: 1, Succeeded: 0, Failed: 1, Warnings: 0" - rmmod vivid + rmmod vim2m exit 0 fi @@ -373,7 +385,7 @@ if [ $vimc -eq 1 ]; then echo "FAIL: the vimc module failed to load" | tee -a $tmp echo "Grand Total for vimc: Succeeded: 0, Failed: 1, Warnings: 0" | tee -a $tmp echo "Final Summary: 1, Succeeded: 0, Failed: 1, Warnings: 0" - rmmod vivid + rmmod vimc exit 0 fi @@ -467,7 +479,7 @@ if [ $vicodec -eq 1 ]; then echo "FAIL: the vicodec module failed to load" | tee -a $tmp echo "Grand Total for vicodec: Succeeded: 0, Failed: 1, Warnings: 0" | tee -a $tmp echo "Final Summary: 1, Succeeded: 0, Failed: 1, Warnings: 0" - rmmod vivid + rmmod vicodec exit 0 fi @@ -603,18 +615,6 @@ if [ $vicodec -eq 1 ]; then echo fi -date -echo -echo unbind vivid | tee /dev/kmsg -echo -echo -n vivid.0 >/sys/bus/platform/drivers/vivid/unbind -sleep $unbind_time -echo -echo rmmod vivid | tee /dev/kmsg -echo -rmmod vivid -sleep $rmmod_time - if [ $vidtv -eq 1 ]; then rmmod dvb_vidtv_bridge dvb_vidtv_tuner dvb_vidtv_demod 2&>/dev/null modprobe vidtv
The script was trying to load vivid and run some commands on top of it even when $vivid = 0. Wrap all vivid code under $vivid variable. Signed-off-by: Helen Koike <helen.koike@collabora.com> --- contrib/test/test-media | 66 ++++++++++++++++++++--------------------- 1 file changed, 33 insertions(+), 33 deletions(-)