diff mbox series

[V2,3/5] arm64: dts: broadcom: bcm4908: describe Netgear R8000P switch

Message ID 20210219055030.3997-3-zajec5@gmail.com
State New
Headers show
Series [V2,1/5] arm64: dts: broadcom: bcm4908: describe USB PHY | expand

Commit Message

Rafał Miłecki Feb. 19, 2021, 5:50 a.m. UTC 
From: Rafał Miłecki <rafal@milecki.pl>

R8000P model has 4 LAN ports and 1 WAN port.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
 .../bcm4908/bcm4906-netgear-r8000p.dts        | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)

Comments

Florian Fainelli March 8, 2021, 10:12 p.m. UTC | #1 
On Fri, 19 Feb 2021 06:50:28 +0100, Rafał Miłecki <zajec5@gmail.com> wrote:
> From: Rafał Miłecki <rafal@milecki.pl>

> 

> R8000P model has 4 LAN ports and 1 WAN port.

> 

> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

> ---


Applied to devicetree-arm64/next, thanks!
--
Florian
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
index bf0d534ace2e..af2616e82e83 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
@@ -43,6 +43,31 @@  &xhci {
 	status = "okay";
 };
 
+&ports {
+	port@0 {
+		label = "lan4";
+	};
+
+	port@1 {
+		label = "lan3";
+	};
+
+	port@2 {
+		label = "lan2";
+	};
+
+	port@3 {
+		label = "lan1";
+	};
+
+	port@7 {
+		reg = <7>;
+		phy-mode = "internal";
+		phy-handle = <&phy12>;
+		label = "wan";
+	};
+};
+
 &nandcs {
 	nand-ecc-strength = <4>;
 	nand-ecc-step-size = <512>;