[v7,1/2] scsi: ufs: Enable power management for wlun

During runtime-suspend of ufs host, the scsi devices are
already suspended and so are the queues associated with them.
But the ufs host sends SSU to wlun during its runtime-suspend.
During the process blk_queue_enter checks if the queue is not in
suspended state. If so, it waits for the queue to resume, and never
comes out of it.
The commit
(d55d15a33: scsi: block: Do not accept any requests while suspended)
adds the check if the queue is in suspended state in blk_queue_enter().

Call trace:
 __switch_to+0x174/0x2c4
 __schedule+0x478/0x764
 schedule+0x9c/0xe0
 blk_queue_enter+0x158/0x228
 blk_mq_alloc_request+0x40/0xa4
 blk_get_request+0x2c/0x70
 __scsi_execute+0x60/0x1c4
 ufshcd_set_dev_pwr_mode+0x124/0x1e4
 ufshcd_suspend+0x208/0x83c
 ufshcd_runtime_suspend+0x40/0x154
 ufshcd_pltfrm_runtime_suspend+0x14/0x20
 pm_generic_runtime_suspend+0x28/0x3c
 __rpm_callback+0x80/0x2a4
 rpm_suspend+0x308/0x614
 rpm_idle+0x158/0x228
 pm_runtime_work+0x84/0xac
 process_one_work+0x1f0/0x470
 worker_thread+0x26c/0x4c8
 kthread+0x13c/0x320
 ret_from_fork+0x10/0x18

Fix this by registering ufs device wlun as a scsi driver and
registering it for block runtime-pm. Also make this as a
supplier for all other luns. That way, this device wlun
suspends after all the consumers and resumes after
hba resumes.

Co-developed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
---
 drivers/scsi/ufs/cdns-pltfrm.c     |   2 +
 drivers/scsi/ufs/tc-dwc-g210-pci.c |   2 +
 drivers/scsi/ufs/ufs-exynos.c      |   2 +
 drivers/scsi/ufs/ufs-hisi.c        |   2 +
 drivers/scsi/ufs/ufs-mediatek.c    |   2 +
 drivers/scsi/ufs/ufs-qcom.c        |   2 +
 drivers/scsi/ufs/ufshcd-pci.c      |  26 +-
 drivers/scsi/ufs/ufshcd.c          | 532 ++++++++++++++++++++++++++++++-------
 drivers/scsi/ufs/ufshcd.h          |   7 +
 include/trace/events/ufs.h         |  20 ++
 10 files changed, 476 insertions(+), 121 deletions(-)

On Thu, Feb 25 2021 at 07:55 -0800, Adrian Hunter wrote:
>On 25/02/21 5:00 am, Asutosh Das wrote:
>> During runtime-suspend of ufs host, the scsi devices are
>> already suspended and so are the queues associated with them.
>> But the ufs host sends SSU to wlun during its runtime-suspend.
>> During the process blk_queue_enter checks if the queue is not in
>> suspended state. If so, it waits for the queue to resume, and never
>> comes out of it.
>> The commit
>> (d55d15a33: scsi: block: Do not accept any requests while suspended)
>> adds the check if the queue is in suspended state in blk_queue_enter().
>>
>> Call trace:
>>  __switch_to+0x174/0x2c4
>>  __schedule+0x478/0x764
>>  schedule+0x9c/0xe0
>>  blk_queue_enter+0x158/0x228
>>  blk_mq_alloc_request+0x40/0xa4
>>  blk_get_request+0x2c/0x70
>>  __scsi_execute+0x60/0x1c4
>>  ufshcd_set_dev_pwr_mode+0x124/0x1e4
>>  ufshcd_suspend+0x208/0x83c
>>  ufshcd_runtime_suspend+0x40/0x154
>>  ufshcd_pltfrm_runtime_suspend+0x14/0x20
>>  pm_generic_runtime_suspend+0x28/0x3c
>>  __rpm_callback+0x80/0x2a4
>>  rpm_suspend+0x308/0x614
>>  rpm_idle+0x158/0x228
>>  pm_runtime_work+0x84/0xac
>>  process_one_work+0x1f0/0x470
>>  worker_thread+0x26c/0x4c8
>>  kthread+0x13c/0x320
>>  ret_from_fork+0x10/0x18
>>
>> Fix this by registering ufs device wlun as a scsi driver and
>> registering it for block runtime-pm. Also make this as a
>> supplier for all other luns. That way, this device wlun
>> suspends after all the consumers and resumes after
>> hba resumes.
>>
>> Co-developed-by: Can Guo <cang@codeaurora.org>
>> Signed-off-by: Can Guo <cang@codeaurora.org>
>> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
>> ---
>>  drivers/scsi/ufs/cdns-pltfrm.c     |   2 +
>>  drivers/scsi/ufs/tc-dwc-g210-pci.c |   2 +
>>  drivers/scsi/ufs/ufs-exynos.c      |   2 +
>>  drivers/scsi/ufs/ufs-hisi.c        |   2 +
>>  drivers/scsi/ufs/ufs-mediatek.c    |   2 +
>>  drivers/scsi/ufs/ufs-qcom.c        |   2 +
>>  drivers/scsi/ufs/ufshcd-pci.c      |  26 +-
>>  drivers/scsi/ufs/ufshcd.c          | 532 ++++++++++++++++++++++++++++++-------
>>  drivers/scsi/ufs/ufshcd.h          |   7 +
>>  include/trace/events/ufs.h         |  20 ++
>>  10 files changed, 476 insertions(+), 121 deletions(-)
>>
>> diff --git a/drivers/scsi/ufs/cdns-pltfrm.c b/drivers/scsi/ufs/cdns-pltfrm.c
>> index 149391f..3e70c23 100644
>> --- a/drivers/scsi/ufs/cdns-pltfrm.c
>> +++ b/drivers/scsi/ufs/cdns-pltfrm.c
>> @@ -319,6 +319,8 @@ static const struct dev_pm_ops cdns_ufs_dev_pm_ops = {
>>  	.runtime_suspend = ufshcd_pltfrm_runtime_suspend,
>>  	.runtime_resume  = ufshcd_pltfrm_runtime_resume,
>>  	.runtime_idle    = ufshcd_pltfrm_runtime_idle,
>> +	.prepare	 = ufshcd_suspend_prepare,
>> +	.complete	= ufshcd_resume_complete,
>>  };
>>
>>  static struct platform_driver cdns_ufs_pltfrm_driver = {
>> diff --git a/drivers/scsi/ufs/tc-dwc-g210-pci.c b/drivers/scsi/ufs/tc-dwc-g210-pci.c
>> index 67a6a61..b01db12 100644
>> --- a/drivers/scsi/ufs/tc-dwc-g210-pci.c
>> +++ b/drivers/scsi/ufs/tc-dwc-g210-pci.c
>> @@ -148,6 +148,8 @@ static const struct dev_pm_ops tc_dwc_g210_pci_pm_ops = {
>>  	.runtime_suspend = tc_dwc_g210_pci_runtime_suspend,
>>  	.runtime_resume  = tc_dwc_g210_pci_runtime_resume,
>>  	.runtime_idle    = tc_dwc_g210_pci_runtime_idle,
>> +	.prepare	 = ufshcd_suspend_prepare,
>> +	.complete	= ufshcd_resume_complete,
>>  };
>>
>>  static const struct pci_device_id tc_dwc_g210_pci_tbl[] = {
>> diff --git a/drivers/scsi/ufs/ufs-exynos.c b/drivers/scsi/ufs/ufs-exynos.c
>> index 267943a1..45c0b02 100644
>> --- a/drivers/scsi/ufs/ufs-exynos.c
>> +++ b/drivers/scsi/ufs/ufs-exynos.c
>> @@ -1268,6 +1268,8 @@ static const struct dev_pm_ops exynos_ufs_pm_ops = {
>>  	.runtime_suspend = ufshcd_pltfrm_runtime_suspend,
>>  	.runtime_resume  = ufshcd_pltfrm_runtime_resume,
>>  	.runtime_idle    = ufshcd_pltfrm_runtime_idle,
>> +	.prepare	 = ufshcd_suspend_prepare,
>> +	.complete	= ufshcd_resume_complete,
>>  };
>>
>>  static struct platform_driver exynos_ufs_pltform = {
>> diff --git a/drivers/scsi/ufs/ufs-hisi.c b/drivers/scsi/ufs/ufs-hisi.c
>> index 0aa5813..d463b44 100644
>> --- a/drivers/scsi/ufs/ufs-hisi.c
>> +++ b/drivers/scsi/ufs/ufs-hisi.c
>> @@ -574,6 +574,8 @@ static const struct dev_pm_ops ufs_hisi_pm_ops = {
>>  	.runtime_suspend = ufshcd_pltfrm_runtime_suspend,
>>  	.runtime_resume  = ufshcd_pltfrm_runtime_resume,
>>  	.runtime_idle    = ufshcd_pltfrm_runtime_idle,
>> +	.prepare	 = ufshcd_suspend_prepare,
>> +	.complete	= ufshcd_resume_complete,
>>  };
>>
>>  static struct platform_driver ufs_hisi_pltform = {
>> diff --git a/drivers/scsi/ufs/ufs-mediatek.c b/drivers/scsi/ufs/ufs-mediatek.c
>> index c55202b..df1eabb 100644
>> --- a/drivers/scsi/ufs/ufs-mediatek.c
>> +++ b/drivers/scsi/ufs/ufs-mediatek.c
>> @@ -1097,6 +1097,8 @@ static const struct dev_pm_ops ufs_mtk_pm_ops = {
>>  	.runtime_suspend = ufshcd_pltfrm_runtime_suspend,
>>  	.runtime_resume  = ufshcd_pltfrm_runtime_resume,
>>  	.runtime_idle    = ufshcd_pltfrm_runtime_idle,
>> +	.prepare	 = ufshcd_suspend_prepare,
>> +	.complete	= ufshcd_resume_complete,
>>  };
>>
>>  static struct platform_driver ufs_mtk_pltform = {
>> diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
>> index f97d7b0..9aa098a 100644
>> --- a/drivers/scsi/ufs/ufs-qcom.c
>> +++ b/drivers/scsi/ufs/ufs-qcom.c
>> @@ -1546,6 +1546,8 @@ static const struct dev_pm_ops ufs_qcom_pm_ops = {
>>  	.runtime_suspend = ufshcd_pltfrm_runtime_suspend,
>>  	.runtime_resume  = ufshcd_pltfrm_runtime_resume,
>>  	.runtime_idle    = ufshcd_pltfrm_runtime_idle,
>> +	.prepare	 = ufshcd_suspend_prepare,
>> +	.complete	= ufshcd_resume_complete,
>>  };
>>
>>  static struct platform_driver ufs_qcom_pltform = {
>> diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/scsi/ufs/ufshcd-pci.c
>> index fadd566..fef1ee4 100644
>> --- a/drivers/scsi/ufs/ufshcd-pci.c
>> +++ b/drivers/scsi/ufs/ufshcd-pci.c
>> @@ -247,29 +247,6 @@ static int ufshcd_pci_resume(struct device *dev)
>>  	return ufshcd_system_resume(dev_get_drvdata(dev));
>>  }
>>
>> -/**
>> - * ufshcd_pci_poweroff - suspend-to-disk poweroff function
>> - * @dev: pointer to PCI device handle
>> - *
>> - * Returns 0 if successful
>> - * Returns non-zero otherwise
>> - */
>> -static int ufshcd_pci_poweroff(struct device *dev)
>> -{
>> -	struct ufs_hba *hba = dev_get_drvdata(dev);
>> -	int spm_lvl = hba->spm_lvl;
>> -	int ret;
>> -
>> -	/*
>> -	 * For poweroff we need to set the UFS device to PowerDown mode.
>> -	 * Force spm_lvl to ensure that.
>> -	 */
>> -	hba->spm_lvl = 5;
>> -	ret = ufshcd_system_suspend(hba);
>> -	hba->spm_lvl = spm_lvl;
>> -	return ret;
>> -}
>> -
>>  #endif /* !CONFIG_PM_SLEEP */
>>
>>  #ifdef CONFIG_PM
>> @@ -370,8 +347,9 @@ static const struct dev_pm_ops ufshcd_pci_pm_ops = {
>>  	.resume		= ufshcd_pci_resume,
>>  	.freeze		= ufshcd_pci_suspend,
>>  	.thaw		= ufshcd_pci_resume,
>> -	.poweroff	= ufshcd_pci_poweroff,
>>  	.restore	= ufshcd_pci_resume,
>> +	.prepare	 = ufshcd_suspend_prepare,
>> +	.complete	= ufshcd_resume_complete,
>>  #endif
>>  	SET_RUNTIME_PM_OPS(ufshcd_pci_runtime_suspend,
>>  			   ufshcd_pci_runtime_resume,
>> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
>> index 45624c7..f5c12fe 100644
>> --- a/drivers/scsi/ufs/ufshcd.c
>> +++ b/drivers/scsi/ufs/ufshcd.c
>> @@ -16,6 +16,7 @@
>>  #include <linux/bitfield.h>
>>  #include <linux/blk-pm.h>
>>  #include <linux/blkdev.h>
>> +#include <scsi/scsi_driver.h>
>>  #include "ufshcd.h"
>>  #include "ufs_quirks.h"
>>  #include "unipro.h"
>> @@ -78,6 +79,8 @@
>>  /* Polling time to wait for fDeviceInit */
>>  #define FDEVICEINIT_COMPL_TIMEOUT 1500 /* millisecs */
>>
>> +#define wlun_dev_to_hba(dv) shost_priv(to_scsi_device(dv)->host)
>> +
>>  #define ufshcd_toggle_vreg(_dev, _vreg, _on)				\
>>  	({                                                              \
>>  		int _ret;                                               \
>> @@ -1556,7 +1559,7 @@ static ssize_t ufshcd_clkscale_enable_store(struct device *dev,
>>  	if (value == hba->clk_scaling.is_enabled)
>>  		goto out;
>>
>> -	pm_runtime_get_sync(hba->dev);
>> +	scsi_autopm_get_device(hba->sdev_ufs_device);
>>  	ufshcd_hold(hba, false);
>>
>>  	hba->clk_scaling.is_enabled = value;
>> @@ -1572,7 +1575,7 @@ static ssize_t ufshcd_clkscale_enable_store(struct device *dev,
>>  	}
>>
>>  	ufshcd_release(hba);
>> -	pm_runtime_put_sync(hba->dev);
>> +	scsi_autopm_put_device(hba->sdev_ufs_device);
>>  out:
>>  	up(&hba->host_sem);
>>  	return err ? err : count;
>> @@ -2572,6 +2575,17 @@ static inline u16 ufshcd_upiu_wlun_to_scsi_wlun(u8 upiu_wlun_id)
>>  	return (upiu_wlun_id & ~UFS_UPIU_WLUN_ID) | SCSI_W_LUN_BASE;
>>  }
>>
>> +static inline bool is_rpmb_wlun(struct scsi_device *sdev)
>> +{
>> +	return (sdev->lun == ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_RPMB_WLUN));
>> +}
>> +
>> +static inline bool is_device_wlun(struct scsi_device *sdev)
>> +{
>> +	return (sdev->lun ==
>> +		ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_UFS_DEVICE_WLUN));
>> +}
>> +
>>  static void ufshcd_init_lrb(struct ufs_hba *hba, struct ufshcd_lrb *lrb, int i)
>>  {
>>  	struct utp_transfer_cmd_desc *cmd_descp = hba->ucdl_base_addr;
>> @@ -4808,6 +4822,41 @@ static inline void ufshcd_get_lu_power_on_wp_status(struct ufs_hba *hba,
>>  }
>>
>>  /**
>> + * ufshcd_setup_links - associate link b/w device wlun and other luns
>> + * @sdev: pointer to SCSI device
>> + * @hba: pointer to ufs hba
>> + */
>> +static void ufshcd_setup_links(struct ufs_hba *hba, struct scsi_device *sdev)
>> +{
>> +	struct device_link *link;
>> +
>> +	/*
>> +	 * device wlun is the supplier & rest of the luns are consumers
>> +	 * This ensures that device wlun suspends after all other luns.
>> +	 */
>> +	if (hba->sdev_ufs_device) {
>> +		link = device_link_add(&sdev->sdev_gendev,
>> +				       &hba->sdev_ufs_device->sdev_gendev,
>> +				       DL_FLAG_PM_RUNTIME);
>> +		if (!link) {
>> +			dev_err(&sdev->sdev_gendev, "Failed establishing link - %s\n",
>> +				dev_name(&hba->sdev_ufs_device->sdev_gendev));
>> +			return;
>> +		}
>> +		hba->luns_avail--;
>> +		/* Ignore REPORT_LUN wlun probing */
>> +		if (hba->luns_avail != 1)
>> +			return;
>> +
>> +		pm_runtime_put_noidle(&hba->sdev_ufs_device->sdev_gendev);
>> +		pm_runtime_mark_last_busy(&hba->sdev_ufs_device->sdev_gendev);
>> +	} else {
>> +		/* device wlun is probed */
>> +		hba->luns_avail--;
>> +	}
>> +}
>> +
>> +/**
>>   * ufshcd_slave_alloc - handle initial SCSI device configurations
>>   * @sdev: pointer to SCSI device
>>   *
>> @@ -4838,6 +4887,8 @@ static int ufshcd_slave_alloc(struct scsi_device *sdev)
>>
>>  	ufshcd_get_lu_power_on_wp_status(hba, sdev);
>>
>> +	ufshcd_setup_links(hba, sdev);
>
>I suspect we will wait for the autosuspend-delay of regular LUs and the
>another auto-suspend-delay of UFS device WLUN i.e. double the previous delay
>

Correct. I think I saw it during my tests. I'm planning to configure the delay
to 1sec for device WLUN. If you'd prefer something else, please let me know.

>> +
>>  	return 0;
>>  }
>>
>> @@ -4984,16 +5035,9 @@ ufshcd_transfer_rsp_status(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
>>  			 * solution could be to abort the system suspend if
>>  			 * UFS device needs urgent BKOPs.
>>  			 */
>> -			if (!hba->pm_op_in_progress &&
>> -			    ufshcd_is_exception_event(lrbp->ucd_rsp_ptr) &&
>> -			    schedule_work(&hba->eeh_work)) {
>> -				/*
>> -				 * Prevent suspend once eeh_work is scheduled
>> -				 * to avoid deadlock between ufshcd_suspend
>> -				 * and exception event handler.
>> -				 */
>> -				pm_runtime_get_noresume(hba->dev);
>> -			}
>> +			if (ufshcd_is_exception_event(lrbp->ucd_rsp_ptr))
>> +				/* Flushed in suspend */
>> +				schedule_work(&hba->eeh_work);
>
>This change does not seem be be exactly right because this exception event
>can be on the response to the power mode change.  Then, if the UFS device is
>in one of the low power modes (e.g. SLEEP), the exception event handler
>cannot read the exception event status.  The suspend still works but the
>exception event handler produces error messages "failed to get BKOPS status".
>
Right. I will add a check to schedule the eeh work iff ufs device wlun is
active.

>>  			break;
>>  		case UPIU_TRANSACTION_REJECT_UPIU:
>>  			/* TODO: handle Reject UPIU Response */
>> @@ -5589,8 +5633,8 @@ static void ufshcd_rpm_dev_flush_recheck_work(struct work_struct *work)
>>  	 * after a certain delay to recheck the threshold by next runtime
>>  	 * suspend.
>>  	 */
>> -	pm_runtime_get_sync(hba->dev);
>> -	pm_runtime_put_sync(hba->dev);
>> +	scsi_autopm_get_device(hba->sdev_ufs_device);
>> +	scsi_autopm_put_device(hba->sdev_ufs_device);
>>  }
>>
>>  /**
>> @@ -5607,7 +5651,6 @@ static void ufshcd_exception_event_handler(struct work_struct *work)
>>  	u32 status = 0;
>>  	hba = container_of(work, struct ufs_hba, eeh_work);
>>
>> -	pm_runtime_get_sync(hba->dev);
>>  	ufshcd_scsi_block_requests(hba);
>>  	err = ufshcd_get_ee_status(hba, &status);
>
>As noted above, we can now get here after the UFS device has suspended.
>
Thanks. Correct, checking for the active power state of the ufs device lun would
fix it. I'll push it in the next version.

>>  	if (err) {
>> @@ -5623,14 +5666,6 @@ static void ufshcd_exception_event_handler(struct work_struct *work)
>>
>>  out:
>>  	ufshcd_scsi_unblock_requests(hba);
>> -	/*
>> -	 * pm_runtime_get_noresume is called while scheduling
>> -	 * eeh_work to avoid suspend racing with exception work.
>> -	 * Hence decrement usage counter using pm_runtime_put_noidle
>> -	 * to allow suspend on completion of exception event handler.
>> -	 */
>> -	pm_runtime_put_noidle(hba->dev);
>> -	pm_runtime_put(hba->dev);
>>  	return;
>>  }
>>
>> @@ -7254,6 +7289,15 @@ static int ufshcd_scsi_add_wlus(struct ufs_hba *hba)
>>  		goto out;
>>  	}
>>  	ufshcd_blk_pm_runtime_init(hba->sdev_ufs_device);
>> +	/*
>> +	 * A pm_runtime_put_sync is invoked when this device enables blk_pm_runtime
>> +	 * & would suspend the device-wlun upon timer expiry.
>> +	 * But suspending device wlun _may_ put the ufs device in the pre-defined
>> +	 * low power mode (SSU <rpm_lvl>). Probing of other luns may fail then.
>> +	 * Don't allow this suspend until all the luns have been probed.
>> +	 * See pm_runtime_mark_last_busy in ufshcd_setup_links.
>> +	 */
>> +	pm_runtime_get_noresume(&hba->sdev_ufs_device->sdev_gendev);
>>  	scsi_device_put(hba->sdev_ufs_device);
>>
>>  	hba->sdev_rpmb = __scsi_add_device(hba->host, 0, 0,
>> @@ -7417,6 +7461,9 @@ static int ufs_get_device_desc(struct ufs_hba *hba)
>>  		goto out;
>>  	}
>>
>> +	hba->luns_avail = desc_buf[DEVICE_DESC_PARAM_NUM_LU] +
>> +		desc_buf[DEVICE_DESC_PARAM_NUM_WLU];
>> +
>>  	ufs_fixup_device_setup(hba);
>>
>>  	ufshcd_wb_probe(hba, desc_buf);
>> @@ -7892,6 +7939,7 @@ static int ufshcd_probe_hba(struct ufs_hba *hba, bool async)
>>  	ufshcd_set_ufs_dev_active(hba);
>>  	ufshcd_force_reset_auto_bkops(hba);
>>  	hba->wlun_dev_clr_ua = true;
>> +	hba->wlun_rpmb_clr_ua = true;
>>
>>  	/* Gear up to HS gear if supported */
>>  	if (hba->max_pwr_info.is_valid) {
>> @@ -7964,6 +8012,7 @@ static void ufshcd_async_scan(void *data, async_cookie_t cookie)
>>  		pm_runtime_put_sync(hba->dev);
>>  		ufshcd_hba_exit(hba);
>>  	}
>> +	hba->init_done = true;
>>  }
>>
>>  static const struct attribute_group *ufshcd_driver_groups[] = {
>> @@ -8475,7 +8524,8 @@ static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba,
>>  	 * handling context.
>>  	 */
>>  	hba->host->eh_noresume = 1;
>> -	ufshcd_clear_ua_wluns(hba);
>> +	if (hba->wlun_dev_clr_ua)
>> +		ufshcd_clear_ua_wlun(hba, UFS_UPIU_UFS_DEVICE_WLUN);
>>
>>  	cmd[4] = pwr_mode << 4;
>>
>> @@ -8650,31 +8700,19 @@ static void ufshcd_hba_vreg_set_hpm(struct ufs_hba *hba)
>>  		ufshcd_setup_hba_vreg(hba, true);
>>  }
>>
>> -/**
>> - * ufshcd_suspend - helper function for suspend operations
>> - * @hba: per adapter instance
>> - * @pm_op: desired low power operation type
>> - *
>> - * This function will try to put the UFS device and link into low power
>> - * mode based on the "rpm_lvl" (Runtime PM level) or "spm_lvl"
>> - * (System PM level).
>> - *
>> - * If this function is called during shutdown, it will make sure that
>> - * both UFS device and UFS link is powered off.
>> - *
>> - * NOTE: UFS device & link must be active before we enter in this function.
>> - *
>> - * Returns 0 for success and non-zero for failure
>> - */
>> -static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>> +static int __ufshcd_wl_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>>  {
>>  	int ret = 0;
>> -	int check_for_bkops;
>>  	enum ufs_pm_level pm_lvl;
>>  	enum ufs_dev_pwr_mode req_dev_pwr_mode;
>>  	enum uic_link_state req_link_state;
>>
>> -	hba->pm_op_in_progress = 1;
>> +	/*
>> +	 * Is invoked when the device wlun is added to sysfs
>> +	 * But by then hba->sdev_ufs_device may not be initialized.
>> +	 */
>> +	if (!hba->init_done)
>> +		return 0;
>>  	if (!ufshcd_is_shutdown_pm(pm_op)) {
>>  		pm_lvl = ufshcd_is_runtime_pm(pm_op) ?
>>  			 hba->rpm_lvl : hba->spm_lvl;
>> @@ -8690,24 +8728,23 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>>  	 * just gate the clocks.
>>  	 */
>>  	ufshcd_hold(hba, false);
>> -	hba->clk_gating.is_suspended = true;
>>
>>  	if (ufshcd_is_clkscaling_supported(hba))
>>  		ufshcd_clk_scaling_suspend(hba, true);
>>
>>  	if (req_dev_pwr_mode == UFS_ACTIVE_PWR_MODE &&
>>  			req_link_state == UIC_LINK_ACTIVE_STATE) {
>> -		goto disable_clks;
>> +		goto enable_scaling;
>>  	}
>>
>>  	if ((req_dev_pwr_mode == hba->curr_dev_pwr_mode) &&
>>  	    (req_link_state == hba->uic_link_state))
>> -		goto enable_gating;
>> +		goto enable_scaling;
>>
>>  	/* UFS device & link must be active before we enter in this function */
>>  	if (!ufshcd_is_ufs_dev_active(hba) || !ufshcd_is_link_active(hba)) {
>>  		ret = -EINVAL;
>> -		goto enable_gating;
>> +		goto enable_scaling;
>>  	}
>>
>>  	if (ufshcd_is_runtime_pm(pm_op)) {
>> @@ -8719,7 +8756,7 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>>  			 */
>>  			ret = ufshcd_urgent_bkops(hba);
>>  			if (ret)
>> -				goto enable_gating;
>> +				goto enable_scaling;
>>  		} else {
>>  			/* make sure that auto bkops is disabled */
>>  			ufshcd_disable_auto_bkops(hba);
>> @@ -8746,10 +8783,208 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>>
>>  		if (!hba->dev_info.b_rpm_dev_flush_capable) {
>>  			ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode);
>> -			if (ret)
>> -				goto enable_gating;
>> +			if (!ret)
>> +				goto out;
>>  		}
>>  	}
>> +enable_scaling:
>> +	if (ufshcd_is_clkscaling_supported(hba))
>> +		ufshcd_clk_scaling_suspend(hba, false);
>> +
>> +	hba->dev_info.b_rpm_dev_flush_capable = false;
>> +out:
>> +	if (hba->dev_info.b_rpm_dev_flush_capable) {
>> +		schedule_delayed_work(&hba->rpm_dev_flush_recheck_work,
>> +			msecs_to_jiffies(RPM_DEV_FLUSH_RECHECK_WORK_DELAY_MS));
>> +	}
>> +	if (ret)
>> +		ufshcd_update_evt_hist(hba, UFS_EVT_WL_SUSP_ERR, (u32)ret);
>> +	ufshcd_release(hba);
>> +	return ret;
>> +}
>> +
>> +static int __ufshcd_wl_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>> +{
>> +	int ret = 0;
>> +
>> +	if (!hba->init_done)
>> +		return 0;
>> +
>> +	ufshcd_hold(hba, false);
>> +	if (ufshcd_is_ufs_dev_deepsleep(hba)) {
>> +		/* The device is in DeepSleep but hba was not suspended */
>> +		ret = ufshcd_reset_and_restore(hba);
>> +		if (ret)
>> +			goto out;
>> +	}
>> +
>> +	if (!ufshcd_is_ufs_dev_active(hba)) {
>> +		ret = ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE);
>> +		if (ret)
>> +			goto out;
>> +	}
>> +
>> +	if (ufshcd_keep_autobkops_enabled_except_suspend(hba))
>> +		ufshcd_enable_auto_bkops(hba);
>> +	else
>> +		/*
>> +		 * If BKOPs operations are urgently needed at this moment then
>> +		 * keep auto-bkops enabled or else disable it.
>> +		 */
>> +		ufshcd_urgent_bkops(hba);
>> +
>> +	if (hba->clk_scaling.is_allowed)
>> +		ufshcd_resume_clkscaling(hba);
>> +
>> +	if (hba->dev_info.b_rpm_dev_flush_capable) {
>> +		hba->dev_info.b_rpm_dev_flush_capable = false;
>> +		cancel_delayed_work(&hba->rpm_dev_flush_recheck_work);
>> +	}
>> +
>> +out:
>> +	if (ret)
>> +		ufshcd_update_evt_hist(hba, UFS_EVT_WL_RES_ERR, (u32)ret);
>> +	ufshcd_release(hba);
>> +	return ret;
>> +}
>> +
>> +static int ufshcd_wl_runtime_suspend(struct device *dev)
>> +{
>> +	struct scsi_device *sdev = to_scsi_device(dev);
>> +	struct ufs_hba *hba;
>> +	int ret;
>> +	ktime_t start = ktime_get();
>> +
>> +	hba = shost_priv(sdev->host);
>> +
>> +	ret = __ufshcd_wl_suspend(hba, UFS_RUNTIME_PM);
>> +	if (ret)
>> +		dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret);
>> +
>> +	trace_ufshcd_wl_runtime_suspend(dev_name(dev), ret,
>> +		ktime_to_us(ktime_sub(ktime_get(), start)),
>> +		hba->curr_dev_pwr_mode, hba->uic_link_state);
>> +
>> +	return ret;
>> +}
>> +
>> +static int ufshcd_wl_runtime_resume(struct device *dev)
>> +{
>> +	struct scsi_device *sdev = to_scsi_device(dev);
>> +	struct ufs_hba *hba;
>> +	int ret = 0;
>> +	ktime_t start = ktime_get();
>> +
>> +	hba = shost_priv(sdev->host);
>> +
>> +	ret = __ufshcd_wl_resume(hba, UFS_RUNTIME_PM);
>> +	if (ret)
>> +		dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret);
>> +
>> +	trace_ufshcd_wl_runtime_resume(dev_name(dev), ret,
>> +		ktime_to_us(ktime_sub(ktime_get(), start)),
>> +		hba->curr_dev_pwr_mode, hba->uic_link_state);
>> +
>> +	return ret;
>> +}
>> +
>> +static int ufshcd_wl_suspend(struct device *dev)
>> +{
>> +	struct scsi_device *sdev = to_scsi_device(dev);
>> +	struct ufs_hba *hba;
>> +	int ret;
>> +	ktime_t start = ktime_get();
>> +
>> +	hba = shost_priv(sdev->host);
>> +	ret = __ufshcd_wl_suspend(hba, UFS_SYSTEM_PM);
>> +	if (ret)
>> +		dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__,  ret);
>> +
>> +	trace_ufshcd_wl_suspend(dev_name(dev), ret,
>> +		ktime_to_us(ktime_sub(ktime_get(), start)),
>> +		hba->curr_dev_pwr_mode, hba->uic_link_state);
>> +
>> +	return ret;
>> +}
>> +
>> +static int ufshcd_wl_resume(struct device *dev)
>> +{
>> +	struct scsi_device *sdev = to_scsi_device(dev);
>> +	struct ufs_hba *hba;
>> +	int ret = 0;
>> +	ktime_t start = ktime_get();
>> +
>> +	if (pm_runtime_suspended(dev))
>> +		return 0;
>> +	hba = shost_priv(sdev->host);
>> +
>> +	ret = __ufshcd_wl_resume(hba, UFS_SYSTEM_PM);
>> +	if (ret)
>> +		dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret);
>> +
>> +	trace_ufshcd_wl_resume(dev_name(dev), ret,
>> +		ktime_to_us(ktime_sub(ktime_get(), start)),
>> +		hba->curr_dev_pwr_mode, hba->uic_link_state);
>> +
>> +	return ret;
>> +}
>> +
>> +static void ufshcd_wl_shutdown(struct device *dev)
>> +{
>> +	struct scsi_device *sdev = to_scsi_device(dev);
>> +	struct ufs_hba *hba;
>> +
>> +	hba = shost_priv(sdev->host);
>> +	/* Turn on everything while shutting down */
>> +	scsi_autopm_get_sync(sdev);
>> +	scsi_device_quiesce(sdev);
>> +	shost_for_each_device(sdev, hba->host) {
>> +		if (sdev == hba->sdev_ufs_device)
>> +			continue;
>> +		scsi_device_quiesce(sdev);
>> +	}
>> +	__ufshcd_wl_suspend(hba, UFS_SHUTDOWN_PM);
>> +}
>> +
>> +/**
>> + * ufshcd_suspend - helper function for suspend operations
>> + * @hba: per adapter instance
>> + * @pm_op: desired low power operation type
>> + *
>> + * This function will try to put the UFS link into low power
>> + * mode based on the "rpm_lvl" (Runtime PM level) or "spm_lvl"
>> + * (System PM level).
>> + *
>> + * If this function is called during shutdown, it will make sure that
>> + * link is powered off.
>> + *
>> + * Returns 0 for success and non-zero for failure
>> + */
>> +static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>> +{
>> +	int ret = 0;
>> +	int check_for_bkops;
>> +	enum ufs_pm_level pm_lvl;
>> +	enum ufs_dev_pwr_mode req_dev_pwr_mode;
>> +	enum uic_link_state req_link_state;
>> +
>> +	hba->pm_op_in_progress = 1;
>> +	if (!ufshcd_is_shutdown_pm(pm_op)) {
>> +		pm_lvl = ufshcd_is_runtime_pm(pm_op) ?
>> +			 hba->rpm_lvl : hba->spm_lvl;
>> +		req_dev_pwr_mode = ufs_get_pm_lvl_to_dev_pwr_mode(pm_lvl);
>> +		req_link_state = ufs_get_pm_lvl_to_link_pwr_state(pm_lvl);
>> +	} else {
>> +		req_dev_pwr_mode = UFS_POWERDOWN_PWR_MODE;
>> +		req_link_state = UIC_LINK_OFF_STATE;
>> +	}
>> +
>> +	/*
>> +	 * If we can't transition into any of the low power modes
>> +	 * just gate the clocks.
>> +	 */
>> +	ufshcd_hold(hba, false);
>> +	hba->clk_gating.is_suspended = true;
>>
>>  	/*
>>  	 * In the case of DeepSleep, the device is expected to remain powered
>> @@ -8758,9 +8993,8 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>>  	check_for_bkops = !ufshcd_is_ufs_dev_deepsleep(hba);
>>  	ret = ufshcd_link_state_transition(hba, req_link_state, check_for_bkops);
>>  	if (ret)
>> -		goto set_dev_active;
>> +		goto enable_gating;
>>
>> -disable_clks:
>>  	/*
>>  	 * Call vendor specific suspend callback. As these callbacks may access
>>  	 * vendor specific host controller register space call them before the
>> @@ -8790,7 +9024,6 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>>  	goto out;
>>
>>  set_link_active:
>> -	ufshcd_vreg_set_hpm(hba);
>>  	/*
>>  	 * Device hardware reset is required to exit DeepSleep. Also, for
>>  	 * DeepSleep, the link is off so host reset and restore will be done
>> @@ -8804,28 +9037,15 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>>  		ufshcd_set_link_active(hba);
>>  	else if (ufshcd_is_link_off(hba))
>>  		ufshcd_host_reset_and_restore(hba);
>> -set_dev_active:
>>  	/* Can also get here needing to exit DeepSleep */
>>  	if (ufshcd_is_ufs_dev_deepsleep(hba)) {
>>  		ufshcd_device_reset(hba);
>>  		ufshcd_host_reset_and_restore(hba);
>>  	}
>> -	if (!ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE))
>> -		ufshcd_disable_auto_bkops(hba);
>>  enable_gating:
>> -	if (ufshcd_is_clkscaling_supported(hba))
>> -		ufshcd_clk_scaling_suspend(hba, false);
>> -
>>  	hba->clk_gating.is_suspended = false;
>> -	hba->dev_info.b_rpm_dev_flush_capable = false;
>> -	ufshcd_clear_ua_wluns(hba);
>>  	ufshcd_release(hba);
>>  out:
>> -	if (hba->dev_info.b_rpm_dev_flush_capable) {
>> -		schedule_delayed_work(&hba->rpm_dev_flush_recheck_work,
>> -			msecs_to_jiffies(RPM_DEV_FLUSH_RECHECK_WORK_DELAY_MS));
>> -	}
>> -
>>  	hba->pm_op_in_progress = 0;
>>
>>  	if (ret)
>> @@ -8846,10 +9066,8 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>>  static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>>  {
>>  	int ret;
>> -	enum uic_link_state old_link_state;
>>
>>  	hba->pm_op_in_progress = 1;
>> -	old_link_state = hba->uic_link_state;
>>
>>  	ufshcd_hba_vreg_set_hpm(hba);
>>  	ret = ufshcd_vreg_set_hpm(hba);
>> @@ -8901,43 +9119,14 @@ static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>>  			goto vendor_suspend;
>>  	}
>>
>> -	if (!ufshcd_is_ufs_dev_active(hba)) {
>> -		ret = ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE);
>> -		if (ret)
>> -			goto set_old_link_state;
>> -	}
>> -
>> -	if (ufshcd_keep_autobkops_enabled_except_suspend(hba))
>> -		ufshcd_enable_auto_bkops(hba);
>> -	else
>> -		/*
>> -		 * If BKOPs operations are urgently needed at this moment then
>> -		 * keep auto-bkops enabled or else disable it.
>> -		 */
>> -		ufshcd_urgent_bkops(hba);
>> -
>> -	hba->clk_gating.is_suspended = false;
>> -
>> -	if (ufshcd_is_clkscaling_supported(hba))
>> -		ufshcd_clk_scaling_suspend(hba, false);
>> -
>>  	/* Enable Auto-Hibernate if configured */
>>  	ufshcd_auto_hibern8_enable(hba);
>>
>> -	if (hba->dev_info.b_rpm_dev_flush_capable) {
>> -		hba->dev_info.b_rpm_dev_flush_capable = false;
>> -		cancel_delayed_work(&hba->rpm_dev_flush_recheck_work);
>> -	}
>> -
>> -	ufshcd_clear_ua_wluns(hba);
>> -
>>  	/* Schedule clock gating in case of no access to UFS device yet */
>>  	ufshcd_release(hba);
>>
>>  	goto out;
>>
>> -set_old_link_state:
>> -	ufshcd_link_state_transition(hba, old_link_state, 0);
>>  vendor_suspend:
>>  	ufshcd_vops_suspend(hba, pm_op);
>>  disable_irq_and_vops_clks:
>> @@ -9477,15 +9666,164 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
>>  }
>>  EXPORT_SYMBOL_GPL(ufshcd_init);
>>
>> +void ufshcd_resume_complete(struct device *dev)
>> +{
>> +	struct ufs_hba *hba = dev_get_drvdata(dev);
>> +
>> +	if (hba->spm_lvl == hba->rpm_lvl)
>> +		return;
I will remove this optimization.

>> +	pm_runtime_put_noidle(&hba->sdev_ufs_device->sdev_gendev);
>> +}
>> +EXPORT_SYMBOL_GPL(ufshcd_resume_complete);
>> +
>> +int ufshcd_suspend_prepare(struct device *dev)
>> +{
>> +	struct ufs_hba *hba = dev_get_drvdata(dev);
>> +
>> +	if (hba->spm_lvl == hba->rpm_lvl)
>
>There are cases when __ufshcd_wl_suspend() does not set the power mode in
>runtime suspend, so it is necessary to check the actual current and target
>power modes.  I am not sure about auto-bkops status also?
>
Right.
I will remove this optimization for now. There're already checks in
__ufshcd_wl_resume that'd take into account of the current and target power
modes.
>> +		return 0;
>> +	/*
>> +	 * SCSI assumes that runtime-pm and system-pm for scsi drivers
>> +	 * are same. And it doesn't wake up the device for system-suspend
>> +	 * if it's runtime suspended. But ufs doesn't follow that.
>> +	 * The rpm-lvl and spm-lvl can be different in ufs.
>> +	 * Force it to honor system-suspend.
>> +	 */
>> +	scsi_autopm_get_device(hba->sdev_ufs_device);
>> +	/* Refer ufshcd_resume_complete() */
>> +	pm_runtime_get_noresume(&hba->sdev_ufs_device->sdev_gendev);
>> +	scsi_autopm_put_device(hba->sdev_ufs_device);
>> +	return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(ufshcd_suspend_prepare);
>> +
>> +static int ufshcd_wl_poweroff(struct device *dev)
>> +{
>> +	ufshcd_wl_shutdown(dev);
>> +	return 0;
>> +}
>> +
>> +static int ufshcd_wl_probe(struct device *dev)
>> +{
>> +	return is_device_wlun(to_scsi_device(dev)) ? 0 : -ENODEV;
>> +}
>> +
>> +static int ufshcd_wl_remove(struct device *dev)
>> +{
>> +	return 0;
>> +}
>> +
>> +static const struct dev_pm_ops ufshcd_wl_pm_ops = {
>> +	SET_RUNTIME_PM_OPS(ufshcd_wl_runtime_suspend, ufshcd_wl_runtime_resume, NULL)
>
>Will need #ifdef CONFIG_PM_SLEEP here and elsewhere
>
Thanks. I'll add it.
 
>> +	.suspend = ufshcd_wl_suspend,
>> +	.resume = ufshcd_wl_resume,
>> +	.freeze = ufshcd_wl_suspend,
>> +	.thaw = ufshcd_wl_resume,
>> +	.poweroff = ufshcd_wl_poweroff,
>> +	.restore = ufshcd_wl_resume,
>> +};
>> +
>> +/**
>> + * ufs_dev_wlun_template - describes ufs device wlun
>> + * ufs-device wlun - used to send pm commands
>> + * All luns are consumers of ufs-device wlun.
>> + *
>> + * Currently, no sd driver is present for wluns.
>> + * Hence the no specific pm operations are performed.
>> + * With ufs design, SSU should be sent to ufs-device wlun.
>> + * Hence register a scsi driver for ufs wluns only.
>> + */
>> +static struct scsi_driver ufs_dev_wlun_template = {
>> +	.gendrv = {
>> +		.name = "ufs_device_wlun",
>> +		.owner = THIS_MODULE,
>> +		.probe = ufshcd_wl_probe,
>> +		.remove = ufshcd_wl_remove,
>> +		.pm = &ufshcd_wl_pm_ops,
>> +		.shutdown = ufshcd_wl_shutdown,
>> +	},
>> +};
>> +
>> +static int ufshcd_rpmb_probe(struct device *dev)
>> +{
>> +	return is_rpmb_wlun(to_scsi_device(dev)) ? 0 : -ENODEV;
>> +}
>> +
>> +static inline int ufshcd_clear_rpmb_uac(struct ufs_hba *hba)
>> +{
>> +	int ret = 0;
>> +
>> +	if (!hba->wlun_rpmb_clr_ua)
>> +		return 0;
>> +	ret = ufshcd_clear_ua_wlun(hba, UFS_UPIU_RPMB_WLUN);
>> +	if (!ret)
>> +		hba->wlun_rpmb_clr_ua = 0;
>> +	return ret;
>> +}
>> +
>> +static int ufshcd_rpmb_runtime_resume(struct device *dev)
>> +{
>> +	struct ufs_hba *hba = wlun_dev_to_hba(dev);
>> +
>> +	if (hba->sdev_rpmb)
>> +		return ufshcd_clear_rpmb_uac(hba);
>> +	return 0;
>> +}
>> +
>> +static int ufshcd_rpmb_resume(struct device *dev)
>> +{
>> +	struct ufs_hba *hba = wlun_dev_to_hba(dev);
>> +
>> +	if (hba->sdev_rpmb && !pm_runtime_suspended(dev))
>> +		return ufshcd_clear_rpmb_uac(hba);
>> +	return 0;
>> +}
>> +
>> +static const struct dev_pm_ops ufs_rpmb_pm_ops = {
>> +	SET_RUNTIME_PM_OPS(NULL, ufshcd_rpmb_runtime_resume, NULL)
>> +	SET_SYSTEM_SLEEP_PM_OPS(NULL, ufshcd_rpmb_resume)
>> +};
>> +
>> +/**
>> + * Describes the ufs rpmb wlun.
>> + * Used only to send uac.
>> + */
>> +static struct scsi_driver ufs_rpmb_wlun_template = {
>> +	.gendrv = {
>> +		.name = "ufs_rpmb_wlun",
>> +		.owner = THIS_MODULE,
>> +		.probe = ufshcd_rpmb_probe,
>> +		.pm = &ufs_rpmb_pm_ops,
>> +	},
>> +};
>> +
>>  static int __init ufshcd_core_init(void)
>>  {
>> +	int ret;
>> +
>>  	ufs_debugfs_init();
>> +
>> +	ret = scsi_register_driver(&ufs_dev_wlun_template.gendrv);
>> +	if (ret) {
>> +		pr_err("Register device wlun driver failed: %d\n",
>> +			ret);
>> +		return ret;
>> +	}
>> +
>> +	ret = scsi_register_driver(&ufs_rpmb_wlun_template.gendrv);
>> +	if (ret) {
>> +		pr_err("Register rpmb wlun driver failed: %d\n",
>> +			ret);
>> +		return ret;
>> +	}
>>  	return 0;
>>  }
>>
>>  static void __exit ufshcd_core_exit(void)
>>  {
>>  	ufs_debugfs_exit();
>> +	scsi_unregister_driver(&ufs_dev_wlun_template.gendrv);
>> +	scsi_unregister_driver(&ufs_rpmb_wlun_template.gendrv);
>>  }
>>
>>  module_init(ufshcd_core_init);
>> diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
>> index ee61f82..e246ec3 100644
>> --- a/drivers/scsi/ufs/ufshcd.h
>> +++ b/drivers/scsi/ufs/ufshcd.h
>> @@ -72,6 +72,8 @@ enum ufs_event_type {
>>  	UFS_EVT_LINK_STARTUP_FAIL,
>>  	UFS_EVT_RESUME_ERR,
>>  	UFS_EVT_SUSPEND_ERR,
>> +	UFS_EVT_WL_SUSP_ERR,
>> +	UFS_EVT_WL_RES_ERR,
>>
>>  	/* abnormal events */
>>  	UFS_EVT_DEV_RESET,
>> @@ -804,6 +806,7 @@ struct ufs_hba {
>>  	struct list_head clk_list_head;
>>
>>  	bool wlun_dev_clr_ua;
>> +	bool wlun_rpmb_clr_ua;
>>
>>  	/* Number of requests aborts */
>>  	int req_abort_count;
>> @@ -841,6 +844,8 @@ struct ufs_hba {
>>  #ifdef CONFIG_DEBUG_FS
>>  	struct dentry *debugfs_root;
>>  #endif
>> +	bool init_done;
>> +	u32 luns_avail;
>>  };
>>
>>  /* Returns true if clocks can be gated. Otherwise false */
>> @@ -1100,6 +1105,8 @@ int ufshcd_exec_raw_upiu_cmd(struct ufs_hba *hba,
>>  			     enum query_opcode desc_op);
>>
>>  int ufshcd_wb_ctrl(struct ufs_hba *hba, bool enable);
>> +int ufshcd_suspend_prepare(struct device *dev);
>> +void ufshcd_resume_complete(struct device *dev);
>>
>>  /* Wrapper functions for safely calling variant operations */
>>  static inline const char *ufshcd_get_var_name(struct ufs_hba *hba)
>> diff --git a/include/trace/events/ufs.h b/include/trace/events/ufs.h
>> index e151477..d9d233b 100644
>> --- a/include/trace/events/ufs.h
>> +++ b/include/trace/events/ufs.h
>> @@ -246,6 +246,26 @@ DEFINE_EVENT(ufshcd_template, ufshcd_init,
>>  		      int dev_state, int link_state),
>>  	     TP_ARGS(dev_name, err, usecs, dev_state, link_state));
>>
>> +DEFINE_EVENT(ufshcd_template, ufshcd_wl_suspend,
>> +	     TP_PROTO(const char *dev_name, int err, s64 usecs,
>> +		      int dev_state, int link_state),
>> +	     TP_ARGS(dev_name, err, usecs, dev_state, link_state));
>> +
>> +DEFINE_EVENT(ufshcd_template, ufshcd_wl_resume,
>> +	     TP_PROTO(const char *dev_name, int err, s64 usecs,
>> +		      int dev_state, int link_state),
>> +	     TP_ARGS(dev_name, err, usecs, dev_state, link_state));
>> +
>> +DEFINE_EVENT(ufshcd_template, ufshcd_wl_runtime_suspend,
>> +	     TP_PROTO(const char *dev_name, int err, s64 usecs,
>> +		      int dev_state, int link_state),
>> +	     TP_ARGS(dev_name, err, usecs, dev_state, link_state));
>> +
>> +DEFINE_EVENT(ufshcd_template, ufshcd_wl_runtime_resume,
>> +	     TP_PROTO(const char *dev_name, int err, s64 usecs,
>> +		      int dev_state, int link_state),
>> +	     TP_ARGS(dev_name, err, usecs, dev_state, link_state));
>> +
>>  TRACE_EVENT(ufshcd_command,
>>  	TP_PROTO(const char *dev_name, enum ufs_trace_str_t str_t,
>>  		 unsigned int tag, u32 doorbell, int transfer_len, u32 intr,
>>
>