@@ -1279,10 +1279,18 @@
#define MDIO_PMA_10GBR_FECCTRL 0x00ab
#endif
+#ifndef MDIO_PMA_RX_CTRL1
+#define MDIO_PMA_RX_CTRL1 0x8051
+#endif
+
#ifndef MDIO_PCS_DIG_CTRL
#define MDIO_PCS_DIG_CTRL 0x8000
#endif
+#ifndef MDIO_PCS_DIGITAL_STAT
+#define MDIO_PCS_DIGITAL_STAT 0x8010
+#endif
+
#ifndef MDIO_AN_XNP
#define MDIO_AN_XNP 0x0016
#endif
@@ -1358,6 +1366,8 @@
#define XGBE_KR_TRAINING_ENABLE BIT(1)
#define XGBE_PCS_CL37_BP BIT(12)
+#define XGBE_PCS_PSEQ_STATE_MASK 0x1c
+#define XGBE_PCS_PSEQ_STATE_POWER_GOOD 0x10
#define XGBE_AN_CL37_INT_CMPLT BIT(0)
#define XGBE_AN_CL37_INT_MASK 0x01
@@ -1375,6 +1385,10 @@
#define XGBE_PMA_CDR_TRACK_EN_OFF 0x00
#define XGBE_PMA_CDR_TRACK_EN_ON 0x01
+#define XGBE_PMA_RX_RST_0_MASK BIT(4)
+#define XGBE_PMA_RX_RST_0_RESET_ON 0x10
+#define XGBE_PMA_RX_RST_0_RESET_OFF 0x00
+
/* Bit setting and getting macros
* The get macro will extract the current bit field value from within
* the variable
@@ -1942,6 +1942,27 @@ static void xgbe_phy_set_redrv_mode(struct xgbe_prv_data *pdata)
xgbe_phy_put_comm_ownership(pdata);
}
+static void xgbe_phy_rx_reset(struct xgbe_prv_data *pdata)
+{
+ int reg;
+
+ reg = XMDIO_READ_BITS(pdata, MDIO_MMD_PCS, MDIO_PCS_DIGITAL_STAT,
+ XGBE_PCS_PSEQ_STATE_MASK);
+ if (reg == XGBE_PCS_PSEQ_STATE_POWER_GOOD) {
+ /* Mailbox command timed out, reset of RX block is required.
+ * This can be done by asseting the reset bit and wait for
+ * its compeletion.
+ */
+ XMDIO_WRITE_BITS(pdata, MDIO_MMD_PMAPMD, MDIO_PMA_RX_CTRL1,
+ XGBE_PMA_RX_RST_0_MASK, XGBE_PMA_RX_RST_0_RESET_ON);
+ ndelay(20);
+ XMDIO_WRITE_BITS(pdata, MDIO_MMD_PMAPMD, MDIO_PMA_RX_CTRL1,
+ XGBE_PMA_RX_RST_0_MASK, XGBE_PMA_RX_RST_0_RESET_OFF);
+ usleep_range(40, 50);
+ netif_err(pdata, link, pdata->netdev, "firmware mailbox reset performed\n");
+ }
+}
+
static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
unsigned int cmd, unsigned int sub_cmd)
{
@@ -1949,9 +1970,11 @@ static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
unsigned int wait;
/* Log if a previous command did not complete */
- if (XP_IOREAD_BITS(pdata, XP_DRIVER_INT_RO, STATUS))
+ if (XP_IOREAD_BITS(pdata, XP_DRIVER_INT_RO, STATUS)) {
netif_dbg(pdata, link, pdata->netdev,
"firmware mailbox not ready for command\n");
+ xgbe_phy_rx_reset(pdata);
+ }
/* Construct the command */
XP_SET_BITS(s0, XP_DRIVER_SCRATCH_0, COMMAND, cmd);
@@ -1973,6 +1996,9 @@ static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
netif_dbg(pdata, link, pdata->netdev,
"firmware mailbox command did not complete\n");
+
+ /* Reset on error */
+ xgbe_phy_rx_reset(pdata);
}
static void xgbe_phy_rrc(struct xgbe_prv_data *pdata)