[v6,22/22] arm64: dts: sdm845-db845c: Enable ov8856 sensor and connect to ISP

Message ID 20210304120326.153966-23-robert.foss@linaro.org
State New
Headers show
Series
  • Add support for the SDM845 Camera Subsystem
Related show

Commit Message

Robert Foss March 4, 2021, 12:03 p.m.
Enable camss & ov8856 DT nodes.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
---


Changes since v5
 - Andrey: Add r-b
 - Change CSI clock & data pins


 arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 5842ab65789c..ca00be42fe67 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -1108,6 +1108,21 @@  &cci {
 
 &camss {
 	vdda-supply = <&vreg_l1a_0p875>;
+
+	status = "ok";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			csiphy0_ep: endpoint {
+				clock-lanes = <7>;
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&ov8856_ep>;
+			};
+		};
+	};
 };
 
 &cci_i2c0 {
@@ -1139,7 +1154,7 @@  camera@10 {
 		avdd-supply = <&cam0_avdd_2v8>;
 		dvdd-supply = <&cam0_dvdd_1v2>;
 
-		status = "disable";
+		status = "ok";
 
 		port {
 			ov8856_ep: endpoint {
@@ -1147,7 +1162,7 @@  ov8856_ep: endpoint {
 				link-frequencies = /bits/ 64
 					<360000000 180000000>;
 				data-lanes = <1 2 3 4>;
-//				remote-endpoint = <&csiphy0_ep>;
+				remote-endpoint = <&csiphy0_ep>;
 			};
 		};
 	};