@@ -126,6 +126,10 @@ static struct clk_lookup lookups[] = {
{ /* Bus clock */
.con_id = "apb_pclk",
.clk = &dummy_apb_pclk,
+ }, {
+ /* Integrator/AP timer frequency */
+ .dev_id = "ap_timer",
+ .clk = &clk24mhz,
}, { /* UART0 */
.dev_id = "mb:16",
.clk = &uartclk,
@@ -13,9 +13,6 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-/* DO NOT EDIT!! - this file automatically generated
- * from .s file by awk -f s2h.awk
- */
/**************************************************************************
* * Copyright © ARM Limited 1998. All rights reserved.
* ***********************************************************************/
@@ -399,15 +396,6 @@
#define INTEGRATOR_TIMER1_BASE (INTEGRATOR_CT_BASE + 0x100)
#define INTEGRATOR_TIMER2_BASE (INTEGRATOR_CT_BASE + 0x200)
-#define TICKS_PER_uSEC 24
-
-/*
- * These are useconds NOT ticks.
- *
- */
-#define mSEC_1 1000
-#define mSEC_10 (mSEC_1 * 10)
-
#define INTEGRATOR_CSR_BASE 0x10000000
#define INTEGRATOR_CSR_SIZE 0x10000000
@@ -32,6 +32,7 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/mtd/physmap.h>
+#include <linux/clk.h>
#include <mach/hardware.h>
#include <mach/platform.h>
@@ -322,13 +323,14 @@ static void __init ap_init(void)
static unsigned long timer_reload;
-static void integrator_clocksource_init(u32 khz)
+static void integrator_clocksource_init(unsigned long inrate)
{
void __iomem *base = (void __iomem *)TIMER2_VA_BASE;
u32 ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC;
+ unsigned long rate = inrate;
- if (khz >= 1500) {
- khz /= 16;
+ if (rate >= 1500000) {
+ rate /= 16;
ctrl |= TIMER_CTRL_DIV16;
}
@@ -336,7 +338,7 @@ static void integrator_clocksource_init(u32 khz)
writel(ctrl, base + TIMER_CTRL);
clocksource_mmio_init(base + TIMER_VALUE, "timer2",
- khz * 1000, 200, 16, clocksource_mmio_readl_down);
+ rate, 200, 16, clocksource_mmio_readl_down);
}
static void __iomem * const clkevt_base = (void __iomem *)TIMER1_VA_BASE;
@@ -411,24 +413,25 @@ static struct irqaction integrator_timer_irq = {
.dev_id = &integrator_clockevent,
};
-static void integrator_clockevent_init(u32 khz)
+static void integrator_clockevent_init(unsigned long inrate)
{
+ unsigned long rate = inrate;
unsigned int ctrl = 0;
/* Calculate and program a divisor */
- if (khz * 1000 > 0x100000 * HZ) {
- khz /= 256;
+ if (rate > 0x100000 * HZ) {
+ rate /= 256;
ctrl |= TIMER_CTRL_DIV256;
- } else if (khz * 1000 > 0x10000 * HZ) {
- khz /= 16;
+ } else if (rate > 0x10000 * HZ) {
+ rate /= 16;
ctrl |= TIMER_CTRL_DIV16;
}
- timer_reload = khz * 1000 / HZ;
+ timer_reload = rate / HZ;
writel(ctrl, clkevt_base + TIMER_CTRL);
setup_irq(IRQ_TIMERINT1, &integrator_timer_irq);
clockevents_config_and_register(&integrator_clockevent,
- khz * 1000,
+ rate,
1,
0xffffU);
}
@@ -438,14 +441,20 @@ static void integrator_clockevent_init(u32 khz)
*/
static void __init ap_init_timer(void)
{
- u32 khz = TICKS_PER_uSEC * 1000;
+ struct clk *clk;
+ unsigned long rate;
+
+ clk = clk_get_sys("ap_timer", NULL);
+ BUG_ON(IS_ERR(clk));
+ clk_enable(clk);
+ rate = clk_get_rate(clk);
writel(0, TIMER0_VA_BASE + TIMER_CTRL);
writel(0, TIMER1_VA_BASE + TIMER_CTRL);
writel(0, TIMER2_VA_BASE + TIMER_CTRL);
- integrator_clocksource_init(khz);
- integrator_clockevent_init(khz);
+ integrator_clocksource_init(rate);
+ integrator_clockevent_init(rate);
}
static struct sys_timer ap_timer = {