@@ -371,6 +371,88 @@ else
ip netns exec nsr1 nft list ruleset
fi
+# Another test:
+# Add bridge interface br0 to Router1, with NAT enabled.
+ip -net nsr1 link add name br0 type bridge
+ip -net nsr1 addr flush dev veth0
+ip -net nsr1 link set up dev veth0
+ip -net nsr1 link set veth0 master br0
+ip -net nsr1 addr add 10.0.1.1/24 dev br0
+ip -net nsr1 addr add dead:1::1/64 dev br0
+ip -net nsr1 link set up dev br0
+
+ip netns exec nsr1 sysctl net.ipv4.conf.br0.forwarding=1 > /dev/null
+
+# br0 with NAT enabled.
+ip netns exec nsr1 nft -f - <<EOF
+flush table ip nat
+table ip nat {
+ chain prerouting {
+ type nat hook prerouting priority 0; policy accept;
+ meta iif "br0" ip daddr 10.6.6.6 tcp dport 1666 counter dnat ip to 10.0.2.99:12345
+ }
+
+ chain postrouting {
+ type nat hook postrouting priority 0; policy accept;
+ meta oifname "veth1" counter masquerade
+ }
+}
+EOF
+
+if test_tcp_forwarding_nat ns1 ns2; then
+ echo "PASS: flow offloaded for ns1/ns2 with bridge NAT"
+else
+ echo "FAIL: flow offload for ns1/ns2 with bridge NAT" 1>&2
+ ip netns exec nsr1 nft list ruleset
+ ret=1
+fi
+
+# Another test:
+# Add bridge interface br0 to Router1, with NAT and VLAN.
+ip -net nsr1 link set veth0 nomaster
+ip -net nsr1 link set down dev veth0
+ip -net nsr1 link add link veth0 name veth0.10 type vlan id 10
+ip -net nsr1 link set up dev veth0
+ip -net nsr1 link set up dev veth0.10
+ip -net nsr1 link set veth0.10 master br0
+
+ip -net ns1 addr flush dev eth0
+ip -net ns1 link add link eth0 name eth0.10 type vlan id 10
+ip -net ns1 link set eth0 up
+ip -net ns1 link set eth0.10 up
+ip -net ns1 addr add 10.0.1.99/24 dev eth0.10
+ip -net ns1 route add default via 10.0.1.1
+ip -net ns1 addr add dead:1::99/64 dev eth0.10
+
+if test_tcp_forwarding_nat ns1 ns2; then
+ echo "PASS: flow offloaded for ns1/ns2 with bridge NAT and VLAN"
+else
+ echo "FAIL: flow offload for ns1/ns2 with bridge NAT and VLAN" 1>&2
+ ip netns exec nsr1 nft list ruleset
+ ret=1
+fi
+
+# restore test topology (remove bridge and VLAN)
+ip -net nsr1 link set veth0 nomaster
+ip -net nsr1 link set veth0 down
+ip -net nsr1 link set veth0.10 down
+ip -net nsr1 link delete veth0.10 type vlan
+ip -net nsr1 link delete br0 type bridge
+ip -net ns1 addr flush dev eth0.10
+ip -net ns1 link set eth0.10 down
+ip -net ns1 link set eth0 down
+ip -net ns1 link delete eth0.10 type vlan
+
+# restore address in ns1 and nsr1
+ip -net ns1 link set eth0 up
+ip -net ns1 addr add 10.0.1.99/24 dev eth0
+ip -net ns1 route add default via 10.0.1.1
+ip -net ns1 addr add dead:1::99/64 dev eth0
+ip -net ns1 route add default via dead:1::1
+ip -net nsr1 addr add 10.0.1.1/24 dev veth0
+ip -net nsr1 addr add dead:1::1/64 dev veth0
+ip -net nsr1 link set up dev veth0
+
KEY_SHA="0x"$(ps -xaf | sha1sum | cut -d " " -f 1)
KEY_AES="0x"$(ps -xaf | md5sum | cut -d " " -f 1)
SPI1=$RANDOM
This patch adds two new tests to cover bridge and vlan support: - Add a bridge device to the Router1 (nsr1) container and attach the veth0 device to the bridge. Set the IP address to the bridge device to exercise the bridge forwarding path. - Add vlan encapsulation between to the bridge device in the Router1 and one of the sender containers (ns1). Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> --- .../selftests/netfilter/nft_flowtable.sh | 82 +++++++++++++++++++ 1 file changed, 82 insertions(+)