| Message ID | 1415032350-8459-5-git-send-email-balbi@ti.com |
|---|---|
| State | New |
| Headers | show |
On Mon, Nov 03, 2014 at 10:32:30AM -0600, Felipe Balbi wrote: > From: George Cherian <george.cherian@ti.com> > > Add support for using cable names. Enables other drivers to register interest > and get notified using extcon provided notifier call backs. > > Signed-off-by: George Cherian <george.cherian@ti.com> > Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> > --- > Documentation/devicetree/bindings/extcon/extcon-gpio.txt | 2 ++ > drivers/extcon/extcon-gpio.c | 4 ++++ > 2 files changed, 6 insertions(+) > > diff --git a/Documentation/devicetree/bindings/extcon/extcon-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-gpio.txt > index 5fe6846..f19aeb4 100644 > --- a/Documentation/devicetree/bindings/extcon/extcon-gpio.txt > +++ b/Documentation/devicetree/bindings/extcon/extcon-gpio.txt > @@ -7,6 +7,7 @@ Required Properties: > - compatible: should be: > * "linux,extcon-gpio" > - gpios: specifies the gpio pin used. > + - cable-name: Name of the cable used. > > Optional Properties: > - debounce: Debounce time for GPIO IRQ in ms > @@ -18,4 +19,5 @@ Eg: > compatible = "linux,extcon-gpio"; > gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>; > debounce = <20>; > + cable-name = "USB-HOST"; > }; > diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c > index 7191d28..cbe35af 100644 > --- a/drivers/extcon/extcon-gpio.c > +++ b/drivers/extcon/extcon-gpio.c > @@ -42,6 +42,7 @@ struct gpio_extcon_data { > struct delayed_work work; > unsigned long debounce_jiffies; > bool check_on_resume; > + const char *cable_name[1]; > }; > > static void gpio_extcon_work(struct work_struct *work) > @@ -112,6 +113,9 @@ static int gpio_extcon_probe(struct platform_device *pdev) > of_property_read_u32(np, "debounce", &debounce); > irq = gpiod_to_irq(extcon_data->gpiod); > irq_flags = irq_get_trigger_type(irq); > + of_property_read_string_index(np, "cable-name", 0, > + extcon_data->cable_name); > + extcon_data->edev->supported_cable = extcon_data->cable_name; > } else { > if (!pdata) > return -EBUSY; > -- > 2.1.0.GIT > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/
diff --git a/Documentation/devicetree/bindings/extcon/extcon-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-gpio.txt index 5fe6846..f19aeb4 100644 --- a/Documentation/devicetree/bindings/extcon/extcon-gpio.txt +++ b/Documentation/devicetree/bindings/extcon/extcon-gpio.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: should be: * "linux,extcon-gpio" - gpios: specifies the gpio pin used. + - cable-name: Name of the cable used. Optional Properties: - debounce: Debounce time for GPIO IRQ in ms @@ -18,4 +19,5 @@ Eg: compatible = "linux,extcon-gpio"; gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>; debounce = <20>; + cable-name = "USB-HOST"; }; diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c index 7191d28..cbe35af 100644 --- a/drivers/extcon/extcon-gpio.c +++ b/drivers/extcon/extcon-gpio.c @@ -42,6 +42,7 @@ struct gpio_extcon_data { struct delayed_work work; unsigned long debounce_jiffies; bool check_on_resume; + const char *cable_name[1]; }; static void gpio_extcon_work(struct work_struct *work) @@ -112,6 +113,9 @@ static int gpio_extcon_probe(struct platform_device *pdev) of_property_read_u32(np, "debounce", &debounce); irq = gpiod_to_irq(extcon_data->gpiod); irq_flags = irq_get_trigger_type(irq); + of_property_read_string_index(np, "cable-name", 0, + extcon_data->cable_name); + extcon_data->edev->supported_cable = extcon_data->cable_name; } else { if (!pdata) return -EBUSY;