diff mbox series

backlight: qcom-wled: Use sink_addr for sync toggle

Message ID 20210314101110.48024-1-marijn.suijten@somainline.org
State New
Headers show
Series backlight: qcom-wled: Use sink_addr for sync toggle | expand

Commit Message

Marijn Suijten March 14, 2021, 10:11 a.m. UTC
From: Obeida Shamoun <oshmoun100@googlemail.com>

WLED3_SINK_REG_SYNC is, as the name implies, a sink register offset.
Therefore, use the sink address as base instead of the ctrl address.

This fixes the sync toggle on wled4, which can be observed by the fact
that adjusting brightness now works.

It has no effect on wled3 because sink and ctrl base addresses are the
same.  This allows adjusting the brightness without having to disable
then reenable the module.

Signed-off-by: Obeida Shamoun <oshmoun100@googlemail.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 drivers/video/backlight/qcom-wled.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Lee Jones March 17, 2021, 9:16 a.m. UTC | #1
On Sun, 14 Mar 2021, Marijn Suijten wrote:

> From: Obeida Shamoun <oshmoun100@googlemail.com>
> 
> WLED3_SINK_REG_SYNC is, as the name implies, a sink register offset.
> Therefore, use the sink address as base instead of the ctrl address.
> 
> This fixes the sync toggle on wled4, which can be observed by the fact
> that adjusting brightness now works.
> 
> It has no effect on wled3 because sink and ctrl base addresses are the
> same.  This allows adjusting the brightness without having to disable
> then reenable the module.
> 
> Signed-off-by: Obeida Shamoun <oshmoun100@googlemail.com>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
> ---
>  drivers/video/backlight/qcom-wled.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)

Applied, thanks.
patchwork-bot+linux-arm-msm@kernel.org May 26, 2021, 7:03 p.m. UTC | #2
Hello:

This patch was applied to qcom/linux.git (refs/heads/for-next):

On Sun, 14 Mar 2021 11:11:10 +0100 you wrote:
> From: Obeida Shamoun <oshmoun100@googlemail.com>

> 

> WLED3_SINK_REG_SYNC is, as the name implies, a sink register offset.

> Therefore, use the sink address as base instead of the ctrl address.

> 

> This fixes the sync toggle on wled4, which can be observed by the fact

> that adjusting brightness now works.

> 

> [...]


Here is the summary with links:
  - backlight: qcom-wled: Use sink_addr for sync toggle
    https://git.kernel.org/qcom/c/cdfd4c689e2a

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
diff mbox series

Patch

diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c
index 091f07e7c145..fc8b443d10fd 100644
--- a/drivers/video/backlight/qcom-wled.c
+++ b/drivers/video/backlight/qcom-wled.c
@@ -336,13 +336,13 @@  static int wled3_sync_toggle(struct wled *wled)
 	unsigned int mask = GENMASK(wled->max_string_count - 1, 0);
 
 	rc = regmap_update_bits(wled->regmap,
-				wled->ctrl_addr + WLED3_SINK_REG_SYNC,
+				wled->sink_addr + WLED3_SINK_REG_SYNC,
 				mask, mask);
 	if (rc < 0)
 		return rc;
 
 	rc = regmap_update_bits(wled->regmap,
-				wled->ctrl_addr + WLED3_SINK_REG_SYNC,
+				wled->sink_addr + WLED3_SINK_REG_SYNC,
 				mask, WLED3_SINK_REG_SYNC_CLEAR);
 
 	return rc;