diff mbox series

[5.10,003/290] powerpc/pseries: Dont enforce MSI affinity with kdump

Message ID 20210315135542.049540354@linuxfoundation.org
State Superseded
Headers show
Series None | expand

Commit Message

Greg KH March 15, 2021, 1:51 p.m. UTC
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

From: Greg Kurz <groug@kaod.org>

commit f9619d5e5174867536b7e558683bc4408eab833f upstream.

Depending on the number of online CPUs in the original kernel, it is
likely for CPU #0 to be offline in a kdump kernel. The associated IRQs
in the affinity mappings provided by irq_create_affinity_masks() are
thus not started by irq_startup(), as per-design with managed IRQs.

This can be a problem with multi-queue block devices driven by blk-mq :
such a non-started IRQ is very likely paired with the single queue
enforced by blk-mq during kdump (see blk_mq_alloc_tag_set()). This
causes the device to remain silent and likely hangs the guest at
some point.

This is a regression caused by commit 9ea69a55b3b9 ("powerpc/pseries:
Pass MSI affinity to irq_create_mapping()"). Note that this only happens
with the XIVE interrupt controller because XICS has a workaround to bypass
affinity, which is activated during kdump with the "noirqdistrib" kernel
parameter.

The issue comes from a combination of factors:
- discrepancy between the number of queues detected by the multi-queue
  block driver, that was used to create the MSI vectors, and the single
  queue mode enforced later on by blk-mq because of kdump (i.e. keeping
  all queues fixes the issue)
- CPU#0 offline (i.e. kdump always succeed with CPU#0)

Given that I couldn't reproduce on x86, which seems to always have CPU#0
online even during kdump, I'm not sure where this should be fixed. Hence
going for another approach : fine-grained affinity is for performance
and we don't really care about that during kdump. Simply revert to the
previous working behavior of ignoring affinity masks in this case only.

Fixes: 9ea69a55b3b9 ("powerpc/pseries: Pass MSI affinity to irq_create_mapping()")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210215094506.1196119-1-groug@kaod.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/platforms/pseries/msi.c |   25 +++++++++++++++++++++++--
 1 file changed, 23 insertions(+), 2 deletions(-)
diff mbox series

Patch

--- a/arch/powerpc/platforms/pseries/msi.c
+++ b/arch/powerpc/platforms/pseries/msi.c
@@ -4,6 +4,7 @@ 
  * Copyright 2006-2007 Michael Ellerman, IBM Corp.
  */
 
+#include <linux/crash_dump.h>
 #include <linux/device.h>
 #include <linux/irq.h>
 #include <linux/msi.h>
@@ -458,8 +459,28 @@  again:
 			return hwirq;
 		}
 
-		virq = irq_create_mapping_affinity(NULL, hwirq,
-						   entry->affinity);
+		/*
+		 * Depending on the number of online CPUs in the original
+		 * kernel, it is likely for CPU #0 to be offline in a kdump
+		 * kernel. The associated IRQs in the affinity mappings
+		 * provided by irq_create_affinity_masks() are thus not
+		 * started by irq_startup(), as per-design for managed IRQs.
+		 * This can be a problem with multi-queue block devices driven
+		 * by blk-mq : such a non-started IRQ is very likely paired
+		 * with the single queue enforced by blk-mq during kdump (see
+		 * blk_mq_alloc_tag_set()). This causes the device to remain
+		 * silent and likely hangs the guest at some point.
+		 *
+		 * We don't really care for fine-grained affinity when doing
+		 * kdump actually : simply ignore the pre-computed affinity
+		 * masks in this case and let the default mask with all CPUs
+		 * be used when creating the IRQ mappings.
+		 */
+		if (is_kdump_kernel())
+			virq = irq_create_mapping(NULL, hwirq);
+		else
+			virq = irq_create_mapping_affinity(NULL, hwirq,
+							   entry->affinity);
 
 		if (!virq) {
 			pr_debug("rtas_msi: Failed mapping hwirq %d\n", hwirq);