@@ -156,6 +156,7 @@ static const VMStateDescription vmstate_gicv3_cpu = {
VMSTATE_UINT32(gicr_waker, GICv3CPUState),
VMSTATE_UINT64(gicr_propbaser, GICv3CPUState),
VMSTATE_UINT64(gicr_pendbaser, GICv3CPUState),
+ VMSTATE_BOOL(lpi_outofrange, GICv3CPUState),
VMSTATE_UINT32(gicr_igroupr0, GICv3CPUState),
VMSTATE_UINT32(gicr_ienabler0, GICv3CPUState),
VMSTATE_UINT32(gicr_ipendr0, GICv3CPUState),
@@ -227,6 +228,7 @@ static const VMStateDescription vmstate_gicv3 = {
.priority = MIG_PRI_GICV3,
.fields = (VMStateField[]) {
VMSTATE_UINT32(gicd_ctlr, GICv3State),
+ VMSTATE_UINT32(gicd_typer, GICv3State),
VMSTATE_UINT32_ARRAY(gicd_statusr, GICv3State, 2),
VMSTATE_UINT32_ARRAY(group, GICv3State, GICV3_BMP_SIZE),
VMSTATE_UINT32_ARRAY(grpmod, GICv3State, GICV3_BMP_SIZE),
@@ -381,6 +383,16 @@ static void arm_gicv3_common_realize(DeviceState *dev, Error **errp)
(1 << 24) |
(i << 8) |
(last << 4);
+
+ if (s->lpi_enable) {
+ s->cpu[i].gicr_typer |= GICR_TYPER_PLPIS;
+
+ if (!s->sysmem) {
+ error_setg(errp,
+ "Redist-ITS: Guest 'sysmem' reference link not set");
+ return;
+ }
+ }
}
}
@@ -406,6 +418,7 @@ static void arm_gicv3_common_reset(DeviceState *dev)
cs->gicr_waker = GICR_WAKER_ProcessorSleep | GICR_WAKER_ChildrenAsleep;
cs->gicr_propbaser = 0;
cs->gicr_pendbaser = 0;
+ cs->lpi_outofrange = false;
/* If we're resetting a TZ-aware GIC as if secure firmware
* had set it up ready to start a kernel in non-secure, we
* need to set interrupts to group 1 so the kernel can use them.
@@ -494,9 +507,12 @@ static Property arm_gicv3_common_properties[] = {
DEFINE_PROP_UINT32("num-cpu", GICv3State, num_cpu, 1),
DEFINE_PROP_UINT32("num-irq", GICv3State, num_irq, 32),
DEFINE_PROP_UINT32("revision", GICv3State, revision, 3),
+ DEFINE_PROP_BOOL("has-lpi", GICv3State, lpi_enable, 0),
DEFINE_PROP_BOOL("has-security-extensions", GICv3State, security_extn, 0),
DEFINE_PROP_ARRAY("redist-region-count", GICv3State, nb_redist_regions,
redist_region_count, qdev_prop_uint32, uint32_t),
+ DEFINE_PROP_LINK("sysmem", GICv3State, sysmem, TYPE_MEMORY_REGION,
+ MemoryRegion *),
DEFINE_PROP_END_OF_LIST(),
};
@@ -366,12 +366,15 @@ static MemTxResult gicd_readl(GICv3State *s, hwaddr offset,
return MEMTX_OK;
case GICD_TYPER:
{
+ bool lpi_supported = false;
/* For this implementation:
* No1N == 1 (1-of-N SPI interrupts not supported)
* A3V == 1 (non-zero values of Affinity level 3 supported)
* IDbits == 0xf (we support 16-bit interrupt identifiers)
* DVIS == 0 (Direct virtual LPI injection not supported)
- * LPIS == 0 (LPIs not supported)
+ * LPIS == 1 (LPIs are supported if affinity routing is enabled)
+ * num_LPIs == 0b00000 (bits [15:11],Number of LPIs as indicated
+ * by GICD_TYPER.IDbits)
* MBIS == 0 (message-based SPIs not supported)
* SecurityExtn == 1 if security extns supported
* CPUNumber == 0 since for us ARE is always 1
@@ -385,8 +388,23 @@ static MemTxResult gicd_readl(GICv3State *s, hwaddr offset,
*/
bool sec_extn = !(s->gicd_ctlr & GICD_CTLR_DS);
+ /*
+ * With securityextn on,LPIs are supported when affinity routing
+ * is enabled for non-secure state and if off LPIs are supported
+ * when affinity routing is enabled.
+ */
+ if (s->lpi_enable) {
+ if (sec_extn) {
+ lpi_supported = (s->gicd_ctlr & GICD_CTLR_ARE_NS);
+ } else {
+ lpi_supported = (s->gicd_ctlr & GICD_CTLR_ARE);
+ }
+ }
+
*data = (1 << 25) | (1 << 24) | (sec_extn << 10) |
- (0xf << 19) | itlinesnumber;
+ (lpi_supported << GICD_TYPER_LPIS_OFFSET) | (GICD_TYPER_IDBITS <<
+ GICD_TYPER_IDBITS_OFFSET) | itlinesnumber;
+ s->gicd_typer = *data;
return MEMTX_OK;
}
case GICD_IIDR:
@@ -248,10 +248,16 @@ static MemTxResult gicr_writel(GICv3CPUState *cs, hwaddr offset,
case GICR_CTLR:
/* For our implementation, GICR_TYPER.DPGS is 0 and so all
* the DPG bits are RAZ/WI. We don't do anything asynchronously,
- * so UWP and RWP are RAZ/WI. And GICR_TYPER.LPIS is 0 (we don't
- * implement LPIs) so Enable_LPIs is RES0. So there are no writable
- * bits for us.
+ * so UWP and RWP are RAZ/WI. GICR_TYPER.LPIS is 1 (we
+ * implement LPIs) so Enable_LPIs is programmable.
*/
+ if (cs->gicr_typer & GICR_TYPER_PLPIS) {
+ if (value & GICR_CTLR_ENABLE_LPIS) {
+ cs->gicr_ctlr |= GICR_CTLR_ENABLE_LPIS;
+ } else {
+ cs->gicr_ctlr &= ~GICR_CTLR_ENABLE_LPIS;
+ }
+ }
return MEMTX_OK;
case GICR_STATUSR:
/* RAZ/WI for our implementation */
@@ -275,6 +281,14 @@ static MemTxResult gicr_writel(GICv3CPUState *cs, hwaddr offset,
cs->gicr_waker = value;
return MEMTX_OK;
case GICR_PROPBASER:
+ if ((value & GICR_PROPBASER_IDBITS_MASK) <
+ GICR_PROPBASER_IDBITS_THRESHOLD) {
+ cs->lpi_outofrange = true;
+ }
+ if ((value & GICR_PROPBASER_IDBITS_MASK) > GICD_TYPER_IDBITS) {
+ value &= ~GICR_PROPBASER_IDBITS_MASK;
+ value |= GICD_TYPER_IDBITS;
+ }
cs->gicr_propbaser = deposit64(cs->gicr_propbaser, 0, 32, value);
return MEMTX_OK;
case GICR_PROPBASER + 4:
@@ -397,6 +411,15 @@ static MemTxResult gicr_writell(GICv3CPUState *cs, hwaddr offset,
{
switch (offset) {
case GICR_PROPBASER:
+ if ((value & GICR_PROPBASER_IDBITS_MASK) <
+ GICR_PROPBASER_IDBITS_THRESHOLD) {
+ cs->lpi_outofrange = true;
+ }
+ if ((value & GICR_PROPBASER_IDBITS_MASK) >
+ GICD_TYPER_IDBITS) {
+ value &= ~GICR_PROPBASER_IDBITS_MASK;
+ value |= GICD_TYPER_IDBITS;
+ }
cs->gicr_propbaser = value;
return MEMTX_OK;
case GICR_PENDBASER:
@@ -175,6 +175,13 @@ struct GICv3CPUState {
uint32_t gicr_nsacr;
uint8_t gicr_ipriorityr[GIC_INTERNAL];
+ /*
+ * flag to indicate LPIs are out of range
+ * since IDbits from GICR_PROPBASER is less
+ * than 0b1101
+ */
+ bool lpi_outofrange;
+
/* CPU interface */
uint64_t icc_sre_el1;
uint64_t icc_ctlr_el1[2];
@@ -221,6 +228,7 @@ struct GICv3State {
uint32_t num_cpu;
uint32_t num_irq;
uint32_t revision;
+ bool lpi_enable;
bool security_extn;
bool irq_reset_nonsecure;
bool gicd_no_migration_shift_bug;
Added properties to enable ITS feature and define qemu system address space memory in gicv3 common,setup distributor and redistributor registers to indicate LPI support. Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org> --- hw/intc/arm_gicv3_common.c | 16 +++++++++++ hw/intc/arm_gicv3_dist.c | 22 +++++++++++++-- hw/intc/arm_gicv3_redist.c | 29 ++++++++++++++++++-- include/hw/intc/arm_gicv3_common.h | 8 ++++++ 4 files changed, 70 insertions(+), 5 deletions(-) -- 2.27.0