@@ -70,4 +70,4 @@ obj-$(CONFIG_CPU_V7) += head-v7.o
obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
-obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o
+obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o
new file mode 100644
@@ -0,0 +1,73 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+static void __init imx6q_init_machine(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+ imx6q_pm_init();
+}
+
+static void __init imx6q_map_io(void)
+{
+ imx_lluart_map_io();
+ imx_scu_map_io();
+}
+
+static const struct of_device_id imx6q_irq_match[] __initconst = {
+ { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+ { .compatible = "fsl,imx6q-gpio", },
+ { /* sentinel */ }
+};
+
+static void __init imx6q_init_irq(void)
+{
+ l2x0_of_init(0, ~0UL);
+ imx_src_init();
+ imx_gpc_init();
+ of_irq_init(imx6q_irq_match);
+}
+
+static void __init imx6q_timer_init(void)
+{
+ mx6q_clocks_init();
+}
+
+static struct sys_timer imx6q_timer = {
+ .init = imx6q_timer_init,
+};
+
+static const char *imx6q_dt_compat[] __initdata = {
+ "fsl,imx6q-sabreauto",
+ NULL,
+};
+
+DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)")
+ .map_io = imx6q_map_io,
+ .init_irq = imx6q_init_irq,
+ .timer = &imx6q_timer,
+ .init_machine = imx6q_init_machine,
+ .dt_compat = imx6q_dt_compat,
+MACHINE_END
@@ -822,7 +822,7 @@ config CACHE_L2X0
REALVIEW_EB_A9MP || SOC_IMX35 || SOC_IMX31 || MACH_REALVIEW_PBX || \
ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \
ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || \
- ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX
+ ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX || ARCH_MX6
default y
select OUTER_CACHE
select OUTER_CACHE_SYNC
@@ -64,6 +64,7 @@ extern int mx51_clocks_init(unsigned long ckil, unsigned long osc,
unsigned long ckih1, unsigned long ckih2);
extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
unsigned long ckih1, unsigned long ckih2);
+extern int mx6q_clocks_init(void);
extern struct platform_device *mxc_register_gpio(char *name, int id,
resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
extern int mxc_register_device(struct platform_device *pdev, void *data);
@@ -73,9 +74,19 @@ extern void mx51_efikamx_reset(void);
extern int mx53_revision(void);
extern int mx53_display_revision(void);
-extern void imx_enable_cpu(int cpu, bool enable);
-extern void imx_set_cpu_jump(int cpu, void *jump_addr);
+#ifdef CONFIG_DEBUG_LL
+extern void imx_lluart_map_io(void);
+#else
+static inline void imx_lluart_map_io(void) {}
+#endif
#ifdef CONFIG_SMP
extern void v7_secondary_startup(void);
+extern void imx_scu_map_io(void);
+#else
+static inline void imx_scu_map_io(void) {}
#endif
+extern void imx_enable_cpu(int cpu, bool enable);
+extern void imx_set_cpu_jump(int cpu, void *jump_addr);
+extern void imx_src_init(void);
+extern void imx_gpc_init(void);
#endif
It adds generic device tree based machine support for imx6q. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> --- arch/arm/mach-imx/Makefile | 2 +- arch/arm/mach-imx/mach-imx6q.c | 73 +++++++++++++++++++++++++++++++ arch/arm/mm/Kconfig | 2 +- arch/arm/plat-mxc/include/mach/common.h | 15 ++++++- 4 files changed, 88 insertions(+), 4 deletions(-) create mode 100644 arch/arm/mach-imx/mach-imx6q.c