diff mbox

[v2] mtd: nand: omap: Fix NAND enumeration on 3430 LDP

Message ID 546C8B7F.6030600@ti.com
State Accepted
Commit 775a9134f4398ca98a10af8cc3cf9b664017267f
Headers show

Commit Message

Roger Quadros Nov. 19, 2014, 12:22 p.m. UTC 
3430LDP has NAND flash with 32 bytes OOB size which is sufficient to hold
BCH8 codes but the small page check introduced in
commit b491da7233d5 ("mtd: nand: omap: clean-up ecc layout for BCH ecc schemes")
considers anything below 64 bytes unsuitable for BCH4/8/16. There is another
bug in that code where it doesn't skip the check for OMAP_ECC_HAM1_CODE_SW.

Get rid of that small page check code as it is insufficient and redundant
because we are checking for OOB available bytes vs ecc layout before calling
nand_scan_tail().

Fixes: b491da7233d5 ("mtd: nand: omap: clean-up ecc layout for BCH ecc schemes")

Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 drivers/mtd/nand/omap2.c | 7 -------
 1 file changed, 7 deletions(-)
diff mbox

Patch

diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 3b357e9..10d07dd 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -1741,13 +1741,6 @@  static int omap_nand_probe(struct platform_device *pdev)
 		goto return_error;
 	}
 
-	/* check for small page devices */
-	if ((mtd->oobsize < 64) && (pdata->ecc_opt != OMAP_ECC_HAM1_CODE_HW)) {
-		dev_err(&info->pdev->dev, "small page devices are not supported\n");
-		err = -EINVAL;
-		goto return_error;
-	}
-
 	/* re-populate low-level callbacks based on xfer modes */
 	switch (pdata->xfer_type) {
 	case NAND_OMAP_PREFETCH_POLLED: