| Message ID | 1416406451-4578-5-git-send-email-yingjoe.chen@mediatek.com |
|---|---|
| State | New |
| Headers | show |
On Wed, Nov 19, 2014 at 02:14:11PM +0000, Yingjoe Chen wrote: > Add binding documentation for Mediatek SoC SYSIRQ. > > Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com> > --- > .../bindings/arm/mediatek/mediatek,sysirq.txt | 26 ++++++++++++++++++++++ > 1 file changed, 26 insertions(+) > create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt > > diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt > new file mode 100644 > index 0000000..8669536 > --- /dev/null > +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt > @@ -0,0 +1,26 @@ > +Mediatek 65xx/81xx sysirq > + > +Mediatek SOCs sysirq support controllable irq inverter for each GIC SPI > +interrupt. > + > +Required properties: > +- compatible: should be one of: > + "mediatek,mt8135-sysirq" > + "mediatek,mt8127-sysirq" > + "mediatek,mt6589-sysirq" > + "mediatek,mt6582-sysirq" > + "mediatek,mt6577-sysirq" > +- interrupt-controller : Identifies the node as an interrupt controller > +- #interrupt-cells : Must use the same cells/format as parent controller. > +- interrupt-parent: phandle of irq domain parent for sysirq. I'm concerned that this sounds very general while the binding assumes the GICv2 interrupt-specifier format. Either the driver needs to become more general, or this needs to be tightened up. It's also odd to say "irq domain parent", as that's purely a Linux construct and has nothing to do with the HW. Thanks, Mark. > +- reg: Physical base address of the intpol registers and length of memory > + mapped region. > + > +Example: > + sysirq: interrupt-controller@10200100 { > + compatible = "mediatek,mt6589-sysirq", "mediatek,mt6577-sysirq"; > + interrupt-controller; > + #interrupt-cells = <3>; > + interrupt-parent = <&gic>; > + reg = <0 0x10200100 0 0x1c>; > + }; > -- > 1.8.1.1.dirty > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt new file mode 100644 index 0000000..8669536 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt @@ -0,0 +1,26 @@ +Mediatek 65xx/81xx sysirq + +Mediatek SOCs sysirq support controllable irq inverter for each GIC SPI +interrupt. + +Required properties: +- compatible: should be one of: + "mediatek,mt8135-sysirq" + "mediatek,mt8127-sysirq" + "mediatek,mt6589-sysirq" + "mediatek,mt6582-sysirq" + "mediatek,mt6577-sysirq" +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Must use the same cells/format as parent controller. +- interrupt-parent: phandle of irq domain parent for sysirq. +- reg: Physical base address of the intpol registers and length of memory + mapped region. + +Example: + sysirq: interrupt-controller@10200100 { + compatible = "mediatek,mt6589-sysirq", "mediatek,mt6577-sysirq"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0 0x10200100 0 0x1c>; + };
Add binding documentation for Mediatek SoC SYSIRQ. Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com> --- .../bindings/arm/mediatek/mediatek,sysirq.txt | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt