@@ -109,6 +109,7 @@ enum {
};
struct mv3310_chip {
+ DECLARE_BITMAP(supported_interfaces, PHY_INTERFACE_MODE_MAX);
int (*get_mactype)(struct phy_device *phydev);
int (*init_interface)(struct phy_device *phydev, int mactype);
};
@@ -545,13 +546,7 @@ static int mv3310_config_init(struct phy_device *phydev)
int err, mactype;
/* Check that the PHY interface type is compatible */
- if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
- phydev->interface != PHY_INTERFACE_MODE_2500BASEX &&
- phydev->interface != PHY_INTERFACE_MODE_5GBASER &&
- phydev->interface != PHY_INTERFACE_MODE_XAUI &&
- phydev->interface != PHY_INTERFACE_MODE_RXAUI &&
- phydev->interface != PHY_INTERFACE_MODE_10GBASER &&
- phydev->interface != PHY_INTERFACE_MODE_USXGMII)
+ if (!test_bit(phydev->interface, chip->supported_interfaces))
return -ENODEV;
phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
@@ -859,11 +854,27 @@ static int mv3310_set_tunable(struct phy_device *phydev,
}
static const struct mv3310_chip mv3310_type = {
+ .supported_interfaces =
+ INITIALIZE_BITMAP(PHY_INTERFACE_MODE_MAX,
+ PHY_INTERFACE_MODE_SGMII,
+ PHY_INTERFACE_MODE_2500BASEX,
+ PHY_INTERFACE_MODE_5GBASER,
+ PHY_INTERFACE_MODE_XAUI,
+ PHY_INTERFACE_MODE_RXAUI,
+ PHY_INTERFACE_MODE_10GBASER,
+ PHY_INTERFACE_MODE_USXGMII),
.get_mactype = mv3310_get_mactype,
.init_interface = mv3310_init_interface,
};
static const struct mv3310_chip mv2110_type = {
+ .supported_interfaces =
+ INITIALIZE_BITMAP(PHY_INTERFACE_MODE_MAX,
+ PHY_INTERFACE_MODE_SGMII,
+ PHY_INTERFACE_MODE_2500BASEX,
+ PHY_INTERFACE_MODE_5GBASER,
+ PHY_INTERFACE_MODE_10GBASER,
+ PHY_INTERFACE_MODE_USXGMII),
.get_mactype = mv2110_get_mactype,
.init_interface = mv2110_init_interface,
};
The 88E2110 does not support xaui nor rxaui modes. Check for correct interface mode for different chips. Signed-off-by: Marek BehĂșn <kabel@kernel.org> --- drivers/net/phy/marvell10g.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-)