| Message ID | 20210413031523.73507-11-xuanzhuo@linux.alibaba.com |
|---|---|
| State | New |
| Headers | show |
| Series | virtio-net support xdp socket zero copy xmit | expand |
在 2021/4/13 上午11:15, Xuan Zhuo 写道: > After testing, the performance of calling kick every time is not stable. > And if all the packets are sent and kicked again, the performance is not > good. So add a module parameter to specify how many packets are sent to > call a kick. > > 8 is a relatively stable value with the best performance. > > Here is the pps of the test of xsk_kick_thr under different values (from > 1 to 64). > > thr PPS thr PPS thr PPS > 1 2924116.74247 | 23 3683263.04348 | 45 2777907.22963 > 2 3441010.57191 | 24 3078880.13043 | 46 2781376.21739 > 3 3636728.72378 | 25 2859219.57656 | 47 2777271.91304 > 4 3637518.61468 | 26 2851557.9593 | 48 2800320.56575 > 5 3651738.16251 | 27 2834783.54408 | 49 2813039.87599 > 6 3652176.69231 | 28 2847012.41472 | 50 3445143.01839 > 7 3665415.80602 | 29 2860633.91304 | 51 3666918.01281 > 8 3665045.16555 | 30 2857903.5786 | 52 3059929.2709 > 9 3671023.2401 | 31 2835589.98963 | 53 2831515.21739 > 10 3669532.23274 | 32 2862827.88706 | 54 3451804.07204 > 11 3666160.37749 | 33 2871855.96696 | 55 3654975.92385 > 12 3674951.44813 | 34 3434456.44816 | 56 3676198.3188 > 13 3667447.57331 | 35 3656918.54177 | 57 3684740.85619 > 14 3018846.0503 | 36 3596921.16722 | 58 3060958.8594 > 15 2792773.84505 | 37 3603460.63903 | 59 2828874.57191 > 16 3430596.3602 | 38 3595410.87666 | 60 3459926.11027 > 17 3660525.85806 | 39 3604250.17819 | 61 3685444.47599 > 18 3045627.69054 | 40 3596542.28428 | 62 3049959.0809 > 19 2841542.94177 | 41 3600705.16054 | 63 2806280.04013 > 20 2830475.97348 | 42 3019833.71191 | 64 3448494.3913 > 21 2845655.55789 | 43 2752951.93264 | > 22 3450389.84365 | 44 2753107.27164 | > > It can be found that when the value of xsk_kick_thr is relatively small, > the performance is not good, and when its value is greater than 13, the > performance will be more irregular and unstable. It looks similar from 3 > to 13, I chose 8 as the default value. > > The test environment is qemu + vhost-net. I modified vhost-net to drop > the packets sent by vm directly, so that the cpu of vm can run higher. > By default, the processes in the vm and the cpu of softirqd are too low, > and there is no obvious difference in the test data. > > During the test, the cpu of softirq reached 100%. Each xsk_kick_thr was > run for 300s, the pps of every second was recorded, and the average of > the pps was finally taken. The vhost process cpu on the host has also > reached 100%. > > Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> > Reviewed-by: Dust Li <dust.li@linux.alibaba.com> > --- > drivers/net/virtio_net.c | 19 +++++++++++++++++-- > 1 file changed, 17 insertions(+), 2 deletions(-) > > diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c > index c441d6bf1510..4e360bfc2cf0 100644 > --- a/drivers/net/virtio_net.c > +++ b/drivers/net/virtio_net.c > @@ -28,9 +28,11 @@ static int napi_weight = NAPI_POLL_WEIGHT; > module_param(napi_weight, int, 0444); > > static bool csum = true, gso = true, napi_tx = true; > +static int xsk_kick_thr = 8; > module_param(csum, bool, 0444); > module_param(gso, bool, 0444); > module_param(napi_tx, bool, 0644); > +module_param(xsk_kick_thr, int, 0644); > > /* FIXME: MTU in config. */ > #define GOOD_PACKET_LEN (ETH_HLEN + VLAN_HLEN + ETH_DATA_LEN) > @@ -2690,6 +2692,7 @@ static int virtnet_xsk_xmit_batch(struct send_queue *sq, > struct xdp_desc desc; > int err, packet = 0; > int ret = -EAGAIN; > + int need_kick = 0; > > if (sq->xsk.last_desc.addr) { > if (sq->vq->num_free < 2 + MAX_SKB_FRAGS) > @@ -2700,6 +2703,7 @@ static int virtnet_xsk_xmit_batch(struct send_queue *sq, > return -EBUSY; > > ++packet; > + ++need_kick; > --budget; > sq->xsk.last_desc.addr = 0; > } > @@ -2723,11 +2727,22 @@ static int virtnet_xsk_xmit_batch(struct send_queue *sq, > } > > ++packet; > + ++need_kick; > + if (need_kick > xsk_kick_thr) { > + if (virtqueue_kick_prepare(sq->vq) && > + virtqueue_notify(sq->vq)) I woner whether it's time to introduce a helper in the virtio core to do this. Thanks > + ++stats->kicks; > + > + need_kick = 0; > + } > } > > if (packet) { > - if (virtqueue_kick_prepare(sq->vq) && virtqueue_notify(sq->vq)) > - ++stats->kicks; > + if (need_kick) { > + if (virtqueue_kick_prepare(sq->vq) && > + virtqueue_notify(sq->vq)) > + ++stats->kicks; > + } > > *done = packet; > stats->xdp_tx += packet;
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index c441d6bf1510..4e360bfc2cf0 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -28,9 +28,11 @@ static int napi_weight = NAPI_POLL_WEIGHT; module_param(napi_weight, int, 0444); static bool csum = true, gso = true, napi_tx = true; +static int xsk_kick_thr = 8; module_param(csum, bool, 0444); module_param(gso, bool, 0444); module_param(napi_tx, bool, 0644); +module_param(xsk_kick_thr, int, 0644); /* FIXME: MTU in config. */ #define GOOD_PACKET_LEN (ETH_HLEN + VLAN_HLEN + ETH_DATA_LEN) @@ -2690,6 +2692,7 @@ static int virtnet_xsk_xmit_batch(struct send_queue *sq, struct xdp_desc desc; int err, packet = 0; int ret = -EAGAIN; + int need_kick = 0; if (sq->xsk.last_desc.addr) { if (sq->vq->num_free < 2 + MAX_SKB_FRAGS) @@ -2700,6 +2703,7 @@ static int virtnet_xsk_xmit_batch(struct send_queue *sq, return -EBUSY; ++packet; + ++need_kick; --budget; sq->xsk.last_desc.addr = 0; } @@ -2723,11 +2727,22 @@ static int virtnet_xsk_xmit_batch(struct send_queue *sq, } ++packet; + ++need_kick; + if (need_kick > xsk_kick_thr) { + if (virtqueue_kick_prepare(sq->vq) && + virtqueue_notify(sq->vq)) + ++stats->kicks; + + need_kick = 0; + } } if (packet) { - if (virtqueue_kick_prepare(sq->vq) && virtqueue_notify(sq->vq)) - ++stats->kicks; + if (need_kick) { + if (virtqueue_kick_prepare(sq->vq) && + virtqueue_notify(sq->vq)) + ++stats->kicks; + } *done = packet; stats->xdp_tx += packet;