diff mbox series

[v3] brcmfmac: support parse country code map from DT

Message ID 20210417075428.2671-1-shawn.guo@linaro.org
State New
Headers show
Series [v3] brcmfmac: support parse country code map from DT | expand

Commit Message

Shawn Guo April 17, 2021, 7:54 a.m. UTC
With any regulatory domain requests coming from either user space or
802.11 IE (Information Element), the country is coded in ISO3166
standard.  It needs to be translated to firmware country code and
revision with the mapping info in settings->country_codes table.
Support populate country_codes table by parsing the mapping from DT.

The BRCMF_BUSTYPE_SDIO bus_type check gets separated from general DT
validation, so that country code can be handled as general part rather
than SDIO bus specific one.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
---
Changes for v3:
 - Add missing terminating '\n' in brcmf_dbg(INFO, ...) format string.

 .../wireless/broadcom/brcm80211/brcmfmac/of.c | 57 ++++++++++++++++++-
 1 file changed, 55 insertions(+), 2 deletions(-)

Comments

Shawn Guo May 23, 2021, 6:06 a.m. UTC | #1
On Sat, Apr 17, 2021 at 03:54:28PM +0800, Shawn Guo wrote:
> With any regulatory domain requests coming from either user space or
> 802.11 IE (Information Element), the country is coded in ISO3166
> standard.  It needs to be translated to firmware country code and
> revision with the mapping info in settings->country_codes table.
> Support populate country_codes table by parsing the mapping from DT.
> 
> The BRCMF_BUSTYPE_SDIO bus_type check gets separated from general DT
> validation, so that country code can be handled as general part rather
> than SDIO bus specific one.
> 
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
> ---
> Changes for v3:
>  - Add missing terminating '\n' in brcmf_dbg(INFO, ...) format string.

Hi Kalle,

Any comments on this version?

Shawn


> 
>  .../wireless/broadcom/brcm80211/brcmfmac/of.c | 57 ++++++++++++++++++-
>  1 file changed, 55 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
> index a7554265f95f..2f7bc3a70c65 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
> @@ -12,12 +12,59 @@
>  #include "common.h"
>  #include "of.h"
>  
> +static int brcmf_of_get_country_codes(struct device *dev,
> +				      struct brcmf_mp_device *settings)
> +{
> +	struct device_node *np = dev->of_node;
> +	struct brcmfmac_pd_cc_entry *cce;
> +	struct brcmfmac_pd_cc *cc;
> +	int count;
> +	int i;
> +
> +	count = of_property_count_strings(np, "brcm,ccode-map");
> +	if (count < 0) {
> +		/* The property is optional, so return success if it doesn't
> +		 * exist. Otherwise propagate the error code.
> +		 */
> +		return (count == -EINVAL) ? 0 : count;
> +	}
> +
> +	cc = devm_kzalloc(dev, sizeof(*cc) + count * sizeof(*cce), GFP_KERNEL);
> +	if (!cc)
> +		return -ENOMEM;
> +
> +	cc->table_size = count;
> +
> +	for (i = 0; i < count; i++) {
> +		const char *map;
> +
> +		cce = &cc->table[i];
> +
> +		if (of_property_read_string_index(np, "brcm,ccode-map",
> +						  i, &map))
> +			continue;
> +
> +		/* String format e.g. US-Q2-86 */
> +		if (sscanf(map, "%2c-%2c-%d", cce->iso3166, cce->cc,
> +			   &cce->rev) != 3)
> +			brcmf_err("failed to read country map %s\n", map);
> +		else
> +			brcmf_dbg(INFO, "%s-%s-%d\n", cce->iso3166, cce->cc,
> +				  cce->rev);
> +	}
> +
> +	settings->country_codes = cc;
> +
> +	return 0;
> +}
> +
>  void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
>  		    struct brcmf_mp_device *settings)
>  {
>  	struct brcmfmac_sdio_pd *sdio = &settings->bus.sdio;
>  	struct device_node *root, *np = dev->of_node;
>  	int irq;
> +	int err;
>  	u32 irqf;
>  	u32 val;
>  
> @@ -43,8 +90,14 @@ void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
>  		of_node_put(root);
>  	}
>  
> -	if (!np || bus_type != BRCMF_BUSTYPE_SDIO ||
> -	    !of_device_is_compatible(np, "brcm,bcm4329-fmac"))
> +	if (!np || !of_device_is_compatible(np, "brcm,bcm4329-fmac"))
> +		return;
> +
> +	err = brcmf_of_get_country_codes(dev, settings);
> +	if (err)
> +		brcmf_err("failed to get OF country code map (err=%d)\n", err);
> +
> +	if (bus_type != BRCMF_BUSTYPE_SDIO)
>  		return;
>  
>  	if (of_property_read_u32(np, "brcm,drive-strength", &val) == 0)
> -- 
> 2.17.1
>
Kalle Valo June 24, 2021, 4:20 p.m. UTC | #2
Shawn Guo <shawn.guo@linaro.org> wrote:

> With any regulatory domain requests coming from either user space or
> 802.11 IE (Information Element), the country is coded in ISO3166
> standard.  It needs to be translated to firmware country code and
> revision with the mapping info in settings->country_codes table.
> Support populate country_codes table by parsing the mapping from DT.
> 
> The BRCMF_BUSTYPE_SDIO bus_type check gets separated from general DT
> validation, so that country code can be handled as general part rather
> than SDIO bus specific one.
> 
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>

Patch applied to wireless-drivers-next.git, thanks.

1a3ac5c651a0 brcmfmac: support parse country code map from DT
diff mbox series

Patch

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
index a7554265f95f..2f7bc3a70c65 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
@@ -12,12 +12,59 @@ 
 #include "common.h"
 #include "of.h"
 
+static int brcmf_of_get_country_codes(struct device *dev,
+				      struct brcmf_mp_device *settings)
+{
+	struct device_node *np = dev->of_node;
+	struct brcmfmac_pd_cc_entry *cce;
+	struct brcmfmac_pd_cc *cc;
+	int count;
+	int i;
+
+	count = of_property_count_strings(np, "brcm,ccode-map");
+	if (count < 0) {
+		/* The property is optional, so return success if it doesn't
+		 * exist. Otherwise propagate the error code.
+		 */
+		return (count == -EINVAL) ? 0 : count;
+	}
+
+	cc = devm_kzalloc(dev, sizeof(*cc) + count * sizeof(*cce), GFP_KERNEL);
+	if (!cc)
+		return -ENOMEM;
+
+	cc->table_size = count;
+
+	for (i = 0; i < count; i++) {
+		const char *map;
+
+		cce = &cc->table[i];
+
+		if (of_property_read_string_index(np, "brcm,ccode-map",
+						  i, &map))
+			continue;
+
+		/* String format e.g. US-Q2-86 */
+		if (sscanf(map, "%2c-%2c-%d", cce->iso3166, cce->cc,
+			   &cce->rev) != 3)
+			brcmf_err("failed to read country map %s\n", map);
+		else
+			brcmf_dbg(INFO, "%s-%s-%d\n", cce->iso3166, cce->cc,
+				  cce->rev);
+	}
+
+	settings->country_codes = cc;
+
+	return 0;
+}
+
 void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
 		    struct brcmf_mp_device *settings)
 {
 	struct brcmfmac_sdio_pd *sdio = &settings->bus.sdio;
 	struct device_node *root, *np = dev->of_node;
 	int irq;
+	int err;
 	u32 irqf;
 	u32 val;
 
@@ -43,8 +90,14 @@  void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
 		of_node_put(root);
 	}
 
-	if (!np || bus_type != BRCMF_BUSTYPE_SDIO ||
-	    !of_device_is_compatible(np, "brcm,bcm4329-fmac"))
+	if (!np || !of_device_is_compatible(np, "brcm,bcm4329-fmac"))
+		return;
+
+	err = brcmf_of_get_country_codes(dev, settings);
+	if (err)
+		brcmf_err("failed to get OF country code map (err=%d)\n", err);
+
+	if (bus_type != BRCMF_BUSTYPE_SDIO)
 		return;
 
 	if (of_property_read_u32(np, "brcm,drive-strength", &val) == 0)