diff mbox series

[v2,3/5] ASoC: rt5682: clock driver must use the clock provider API

Message ID 20210421120512.413057-4-jbrunet@baylibre.com
State Accepted
Commit 8691743c511d6f92d7647d78ea1e5f5ef69937b1
Headers show
Series None | expand

Commit Message

Jerome Brunet April 21, 2021, 12:05 p.m. UTC 
Clock drivers ops should not call the clk API but the clock provider
(clk_hw) instead.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 sound/soc/codecs/rt5682.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c
index a5aacfe01a0d..e4c91571abae 100644
--- a/sound/soc/codecs/rt5682.c
+++ b/sound/soc/codecs/rt5682.c
@@ -2634,7 +2634,7 @@  static int rt5682_wclk_set_rate(struct clk_hw *hw, unsigned long rate,
 		container_of(hw, struct rt5682_priv,
 			     dai_clks_hw[RT5682_DAI_WCLK_IDX]);
 	struct snd_soc_component *component = rt5682->component;
-	struct clk *parent_clk;
+	struct clk_hw *parent_hw;
 	const char * const clk_name = clk_hw_get_name(hw);
 	int pre_div;
 	unsigned int clk_pll2_out;
@@ -2649,8 +2649,8 @@  static int rt5682_wclk_set_rate(struct clk_hw *hw, unsigned long rate,
 	 *
 	 * It will set the codec anyway by assuming mclk is 48MHz.
 	 */
-	parent_clk = clk_get_parent(hw->clk);
-	if (!parent_clk)
+	parent_hw = clk_hw_get_parent(hw);
+	if (!parent_hw)
 		dev_warn(component->dev,
 			"Parent mclk of wclk not acquired in driver. Please ensure mclk was provided as %d Hz.\n",
 			CLK_PLL2_FIN);