diff mbox series

[2/3,net-next,v3] net: ethernet: ixp4xx: Retire ancient phy retrieveal

Message ID 20210423082208.2244803-2-linus.walleij@linaro.org
State Superseded
Headers show
Series [1/3,net-next,v3] net: ethernet: ixp4xx: Add DT bindings | expand

Commit Message

Linus Walleij April 23, 2021, 8:22 a.m. UTC
This driver was using a really dated way of obtaining the
phy by printing a string and using it with phy_connect().
Switch to using more reasonable modern interfaces.

Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

---
ChangeLog v1->v3:
- New patch
---
 drivers/net/ethernet/xscale/ixp4xx_eth.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

-- 
2.29.2

Comments

Andrew Lunn April 23, 2021, 2:24 p.m. UTC | #1
On Fri, Apr 23, 2021 at 10:22:07AM +0200, Linus Walleij wrote:
> This driver was using a really dated way of obtaining the

> phy by printing a string and using it with phy_connect().

> Switch to using more reasonable modern interfaces.

> 

> Suggested-by: Andrew Lunn <andrew@lunn.ch>

> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>


Reviewed-by: Andrew Lunn <andrew@lunn.ch>


    Andrew
diff mbox series

Patch

diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c
index 9defaa21a1a9..4df2686ac5b8 100644
--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
@@ -1360,7 +1360,6 @@  static const struct net_device_ops ixp4xx_netdev_ops = {
 
 static int ixp4xx_eth_probe(struct platform_device *pdev)
 {
-	char phy_id[MII_BUS_ID_SIZE + 3];
 	struct phy_device *phydev = NULL;
 	struct device *dev = &pdev->dev;
 	struct eth_plat_info *plat;
@@ -1462,14 +1461,15 @@  static int ixp4xx_eth_probe(struct platform_device *pdev)
 	__raw_writel(DEFAULT_CORE_CNTRL, &port->regs->core_control);
 	udelay(50);
 
-	snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT,
-		mdio_bus->id, plat->phy);
-	phydev = phy_connect(ndev, phy_id, &ixp4xx_adjust_link,
-			     PHY_INTERFACE_MODE_MII);
+	phydev = mdiobus_get_phy(mdio_bus, plat->phy);
 	if (IS_ERR(phydev)) {
 		err = PTR_ERR(phydev);
 		goto err_free_mem;
 	}
+	err = phy_connect_direct(ndev, phydev, ixp4xx_adjust_link,
+				 PHY_INTERFACE_MODE_MII);
+	if (err)
+		goto err_free_mem;
 
 	phydev->irq = PHY_POLL;