diff mbox

[3.19-rc2,v15,5/8] arm: omap1: Migrate debug_ll macros to use 8250.S

Message ID 1420461624-4410-6-git-send-email-daniel.thompson@linaro.org
State Accepted
Commit c26b999353339c235b9e166739926d0199eeecbf
Headers show

Commit Message

Daniel Thompson Jan. 5, 2015, 12:40 p.m. UTC 
The omap1's debug-macro.S is similar to the generic 8250 code. Compared to
the 8520 code the omap1 macro automatically determines what UART to use
based on breadcrumbs left by the bootloader and automatically copes with
the eccentric register layout on OMAP7XX.

This patch drops both these features and relies instead on the generic
8250 macros:

1. Dropping support for the bootloader breadcrumbs is identical to the
   way the migration was handled for OMAP2 (see 808b7e07464d...).

2. Support for OMAP7XX still exists but it must be configured by hand
   (DEBUG_OMAP7XXUART1/2/3) rather than handled at runtime.

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Arnd Bergmann <arnd.bergmann@linaro.org>
Cc: linux-omap@vger.kernel.org
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/Kconfig.debug                         |  57 +++++++++++++-
 arch/arm/mach-omap1/include/mach/debug-macro.S | 101 -------------------------
 2 files changed, 56 insertions(+), 102 deletions(-)
 delete mode 100644 arch/arm/mach-omap1/include/mach/debug-macro.S
diff mbox

Patch

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index eba36e35bad2..ec25d746b4dd 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -527,6 +527,30 @@  choice
 		  Say Y here if you want kernel low-level debugging support
 		  on TI-NSPIRE CX models.
 
+	config DEBUG_OMAP1UART1
+		bool "Kernel low-level debugging via OMAP1 UART1"
+		depends on ARCH_OMAP1
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on OMAP1 based platforms (except OMAP730) on the UART1.
+
+	config DEBUG_OMAP1UART2
+		bool "Kernel low-level debugging via OMAP1 UART2"
+		depends on ARCH_OMAP1
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on OMAP1 based platforms (except OMAP730) on the UART2.
+
+	config DEBUG_OMAP1UART3
+		bool "Kernel low-level debugging via OMAP1 UART3"
+		depends on ARCH_OMAP1
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on OMAP1 based platforms (except OMAP730) on the UART3.
+
 	config DEBUG_OMAP2UART1
 		bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)"
 		depends on ARCH_OMAP2PLUS
@@ -569,6 +593,30 @@  choice
 		depends on ARCH_OMAP2PLUS
 		select DEBUG_OMAP2PLUS_UART
 
+	config DEBUG_OMAP7XXUART1
+		bool "Kernel low-level debugging via OMAP730 UART1"
+		depends on ARCH_OMAP730
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on OMAP730 based platforms on the UART1.
+
+	config DEBUG_OMAP7XXUART2
+		bool "Kernel low-level debugging via OMAP730 UART2"
+		depends on ARCH_OMAP730
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on OMAP730 based platforms on the UART2.
+
+	config DEBUG_OMAP7XXUART3
+		bool "Kernel low-level debugging via OMAP730 UART3"
+		depends on ARCH_OMAP730
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on OMAP730 based platforms on the UART3.
+
 	config DEBUG_TI81XXUART1
 		bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)"
 		depends on ARCH_OMAP2PLUS
@@ -1308,6 +1356,9 @@  config DEBUG_UART_PHYS
 	default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0
 	default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2
 	default 0xfff36000 if DEBUG_HIGHBANK_UART
+	default 0xfffb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
+	default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
+	default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
 	default 0xfffe8600 if DEBUG_UART_BCM63XX
 	default 0xfffff700 if ARCH_IOP33X
 	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
@@ -1390,6 +1441,9 @@  config DEBUG_UART_VIRT
 	default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
 	default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
 	default 0xfef36000 if DEBUG_HIGHBANK_UART
+	default 0xfefb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
+	default 0xfefb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
+	default 0xfefb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
 	default 0xfefff700 if ARCH_IOP33X
 	default 0xff003000 if DEBUG_U300_UART
 	default DEBUG_UART_PHYS if !MMU
@@ -1401,7 +1455,8 @@  config DEBUG_UART_VIRT
 config DEBUG_UART_8250_SHIFT
 	int "Register offset shift for the 8250 debug UART"
 	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
-	default 0 if FOOTBRIDGE || ARCH_IOP32X || DEBUG_BCM_5301X
+	default 0 if FOOTBRIDGE || ARCH_IOP32X || DEBUG_BCM_5301X || \
+		DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || DEBUG_OMAP7XXUART3
 	default 2
 
 config DEBUG_UART_8250_WORD
diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S
deleted file mode 100644
index 5c1a26c9f490..000000000000
--- a/arch/arm/mach-omap1/include/mach/debug-macro.S
+++ /dev/null
@@ -1,101 +0,0 @@ 
-/* arch/arm/mach-omap1/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/serial_reg.h>
-
-#include "serial.h"
-
-		.pushsection .data
-omap_uart_phys:	.word	0x0
-omap_uart_virt:	.word	0x0
-		.popsection
-
-		/*
-		 * Note that this code won't work if the bootloader passes
-		 * a wrong machine ID number in r1. To debug, just hardcode
-		 * the desired UART phys and virt addresses temporarily into
-		 * the omap_uart_phys and omap_uart_virt above.
-		 */
-		.macro	addruart, rp, rv, tmp
-
-		/* Use omap_uart_phys/virt if already configured */
-9:		adr	\rp, 99f		@ get effective addr of 99f
-		ldr	\rv, [\rp]		@ get absolute addr of 99f
-		sub	\rv, \rv, \rp		@ offset between the two
-		ldr	\rp, [\rp, #4]		@ abs addr of omap_uart_phys
-		sub	\tmp, \rp, \rv		@ make it effective
-		ldr	\rp, [\tmp, #0]		@ omap_uart_phys
-		ldr	\rv, [\tmp, #4]		@ omap_uart_virt
-		cmp	\rp, #0			@ is port configured?
-		cmpne	\rv, #0
-		bne	100f			@ already configured
-
-		/* Check the debug UART configuration set in uncompress.h */
-		and	\rp, pc, #0xff000000
-		ldr	\rv, =OMAP_UART_INFO_OFS
-		ldr	\rp, [\rp, \rv]
-
-		/* Select the UART to use based on the UART1 scratchpad value */
-10:		cmp	\rp, #0			@ no port configured?
-		beq	11f			@ if none, try to use UART1
-		cmp	\rp, #OMAP1UART1
-		beq	11f			@ configure OMAP1UART1
-		cmp	\rp, #OMAP1UART2
-		beq	12f			@ configure OMAP1UART2
-		cmp	\rp, #OMAP1UART3
-		beq	13f			@ configure OMAP2UART3
-
-		/* Configure the UART offset from the phys/virt base */
-11:		mov	\rp, #0x00fb0000	@ OMAP1UART1
-		b	98f
-12:		mov	\rp, #0x00fb0000	@ OMAP1UART1
-		orr	\rp, \rp, #0x00000800	@ OMAP1UART2
-		b	98f
-13:		mov	\rp, #0x00fb0000	@ OMAP1UART1
-		orr	\rp, \rp, #0x00000800	@ OMAP1UART2
-		orr	\rp, \rp, #0x00009000	@ OMAP1UART3
-
-		/* Store both phys and virt address for the uart */
-98:		add	\rp, \rp, #0xff000000	@ phys base
-		str	\rp, [\tmp, #0]		@ omap_uart_phys
-		sub	\rp, \rp, #0xff000000	@ phys base
-		add	\rp, \rp, #0xfe000000	@ virt base
-		str	\rp, [\tmp, #4]		@ omap_uart_virt
-		b	9b
-
-		.align
-99:		.word	.
-		.word	omap_uart_phys
-		.ltorg
-
-100:
-		.endm
-
-		.macro	senduart,rd,rx
-		strb	\rd, [\rx]
-		.endm
-
-		.macro	busyuart,rd,rx
-1001:		ldrb	\rd, [\rx, #(UART_LSR << OMAP_PORT_SHIFT)]
-		and	\rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
-		teq	\rd, #(UART_LSR_TEMT | UART_LSR_THRE)
-		beq	1002f
-		ldrb	\rd, [\rx, #(UART_LSR << OMAP7XX_PORT_SHIFT)]
-		and	\rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
-		teq	\rd, #(UART_LSR_TEMT | UART_LSR_THRE)
-		bne	1001b
-1002:
-		.endm
-
-		.macro	waituart,rd,rx
-		.endm