[3/3] dt-bindings: net: convert rockchip-dwmac to json-schema

diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
deleted file mode 100644
index 3b71da7e8742..000000000000
--- a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
+++ /dev/null
@@ -1,76 +0,0 @@ 
-Rockchip SoC RK3288 10/100/1000 Ethernet driver(GMAC)
-
-The device node has following properties.
-
-Required properties:
- - compatible: should be "rockchip,<name>-gamc"
-   "rockchip,px30-gmac":   found on PX30 SoCs
-   "rockchip,rk3128-gmac": found on RK312x SoCs
-   "rockchip,rk3228-gmac": found on RK322x SoCs
-   "rockchip,rk3288-gmac": found on RK3288 SoCs
-   "rockchip,rk3328-gmac": found on RK3328 SoCs
-   "rockchip,rk3366-gmac": found on RK3366 SoCs
-   "rockchip,rk3368-gmac": found on RK3368 SoCs
-   "rockchip,rk3399-gmac": found on RK3399 SoCs
-   "rockchip,rv1108-gmac": found on RV1108 SoCs
- - reg: addresses and length of the register sets for the device.
- - interrupts: Should contain the GMAC interrupts.
- - interrupt-names: Should contain the interrupt names "macirq".
- - rockchip,grf: phandle to the syscon grf used to control speed and mode.
- - clocks: <&cru SCLK_MAC>: clock selector for main clock, from PLL or PHY.
-	   <&cru SCLK_MAC_PLL>: PLL clock for SCLK_MAC
-	   <&cru SCLK_MAC_RX>: clock gate for RX
-	   <&cru SCLK_MAC_TX>: clock gate for TX
-	   <&cru SCLK_MACREF>: clock gate for RMII referce clock
-	   <&cru SCLK_MACREF_OUT> clock gate for RMII reference clock output
-	   <&cru ACLK_GMAC>: AXI clock gate for GMAC
-	   <&cru PCLK_GMAC>: APB clock gate for GMAC
- - clock-names: One name for each entry in the clocks property.
- - phy-mode: See ethernet.txt file in the same directory.
- - pinctrl-names: Names corresponding to the numbered pinctrl states.
- - pinctrl-0: pin-control mode. can be <&rgmii_pins> or <&rmii_pins>.
- - clock_in_out: For RGMII, it must be "input", means main clock(125MHz)
-   is not sourced from SoC's PLL, but input from PHY; For RMII, "input" means
-   PHY provides the reference clock(50MHz), "output" means GMAC provides the
-   reference clock.
- - snps,reset-gpio       gpio number for phy reset.
- - snps,reset-active-low boolean flag to indicate if phy reset is active low.
- - assigned-clocks: main clock, should be <&cru SCLK_MAC>;
- - assigned-clock-parents = parent of main clock.
-   can be <&ext_gmac> or <&cru SCLK_MAC_PLL>.
-
-Optional properties:
- - tx_delay: Delay value for TXD timing. Range value is 0~0x7F, 0x30 as default.
- - rx_delay: Delay value for RXD timing. Range value is 0~0x7F, 0x10 as default.
- - phy-supply: phandle to a regulator if the PHY needs one
-
-Example:
-
-gmac: ethernet@ff290000 {
-	compatible = "rockchip,rk3288-gmac";
-	reg = <0xff290000 0x10000>;
-	interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-names = "macirq";
-	rockchip,grf = <&grf>;
-	clocks = <&cru SCLK_MAC>,
-		<&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>,
-		<&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>,
-		<&cru ACLK_GMAC>, <&cru PCLK_GMAC>;
-	clock-names = "stmmaceth",
-		"mac_clk_rx", "mac_clk_tx",
-		"clk_mac_ref", "clk_mac_refout",
-		"aclk_mac", "pclk_mac";
-	phy-mode = "rgmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins /*&rmii_pins*/>;
-
-	clock_in_out = "input";
-	snps,reset-gpio = <&gpio4 7 0>;
-	snps,reset-active-low;
-
-	assigned-clocks = <&cru SCLK_MAC>;
-	assigned-clock-parents = <&ext_gmac>;
-	tx_delay = <0x30>;
-	rx_delay = <0x10>;
-
-};
diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml
new file mode 100644
index 000000000000..5acddb6171bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml
@@ -0,0 +1,120 @@ 
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/net/rockchip-dwmac.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Rockchip 10/100/1000 Ethernet driver(GMAC)
+
+maintainers:
+  - David Wu <david.wu@rock-chips.com>
+
+# We need a select here so we don't match all nodes with 'snps,dwmac'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - rockchip,px30-gmac
+          - rockchip,rk3128-gmac
+          - rockchip,rk3228-gmac
+          - rockchip,rk3288-gmac
+          - rockchip,rk3328-gmac
+          - rockchip,rk3366-gmac
+          - rockchip,rk3368-gmac
+          - rockchip,rk3399-gmac
+          - rockchip,rv1108-gmac
+  required:
+    - compatible
+
+allOf:
+  - $ref: "snps,dwmac.yaml#"
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - rockchip,px30-gmac
+          - rockchip,rk3128-gmac
+          - rockchip,rk3228-gmac
+          - rockchip,rk3288-gmac
+          - rockchip,rk3328-gmac
+          - rockchip,rk3366-gmac
+          - rockchip,rk3368-gmac
+          - rockchip,rk3399-gmac
+          - rockchip,rv1108-gmac
+
+  clocks:
+    minItems: 5
+    maxItems: 8
+
+  clock-names:
+    contains:
+      enum:
+        - stmmaceth
+        - mac_clk_tx
+        - mac_clk_rx
+        - aclk_mac
+        - pclk_mac
+        - clk_mac_ref
+        - clk_mac_refout
+        - clk_mac_speed
+
+  clock_in_out:
+    description:
+      For RGMII, it must be "input", means main clock(125MHz)
+      is not sourced from SoC's PLL, but input from PHY.
+      For RMII, "input" means PHY provides the reference clock(50MHz),
+      "output" means GMAC provides the reference clock.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [input, output]
+
+  rockchip,grf:
+    description: The phandle of the syscon node for the general register file.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  tx_delay:
+    description: Delay value for TXD timing. Range value is 0~0x7F, 0x30 as default.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  rx_delay:
+    description: Delay value for RXD timing. Range value is 0~0x7F, 0x10 as default.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  phy-supply:
+    description: PHY regulator
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/rk3288-cru.h>
+
+    gmac: ethernet@ff290000 {
+        compatible = "rockchip,rk3288-gmac";
+        reg = <0xff290000 0x10000>;
+        interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "macirq";
+        clocks = <&cru SCLK_MAC>,
+                 <&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>,
+                 <&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>,
+                 <&cru ACLK_GMAC>, <&cru PCLK_GMAC>;
+        clock-names = "stmmaceth",
+                      "mac_clk_rx", "mac_clk_tx",
+                      "clk_mac_ref", "clk_mac_refout",
+                      "aclk_mac", "pclk_mac";
+        assigned-clocks = <&cru SCLK_MAC>;
+        assigned-clock-parents = <&ext_gmac>;
+
+        rockchip,grf = <&grf>;
+        phy-mode = "rgmii";
+        clock_in_out = "input";
+        tx_delay = <0x30>;
+        rx_delay = <0x10>;
+    };