new file mode 100644
@@ -0,0 +1,239 @@
+/*
+ * ITS emulation for a GICv3-based system
+ *
+ * Copyright Linaro.org 2021
+ *
+ * Authors:
+ * Shashi Mallela <shashi.mallela@linaro.org>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or (at your
+ * option) any later version. See the COPYING file in the top-level directory.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "hw/qdev-properties.h"
+#include "hw/intc/arm_gicv3_its_common.h"
+#include "gicv3_internal.h"
+#include "qom/object.h"
+
+typedef struct GICv3ITSClass GICv3ITSClass;
+/* This is reusing the GICv3ITSState typedef from ARM_GICV3_ITS_COMMON */
+DECLARE_OBJ_CHECKERS(GICv3ITSState, GICv3ITSClass,
+ ARM_GICV3_ITS, TYPE_ARM_GICV3_ITS)
+
+struct GICv3ITSClass {
+ GICv3ITSCommonClass parent_class;
+ void (*parent_reset)(DeviceState *dev);
+};
+
+static MemTxResult gicv3_its_translation_write(void *opaque, hwaddr offset,
+ uint64_t data, unsigned size, MemTxAttrs attrs)
+{
+ MemTxResult result = MEMTX_OK;
+
+ return result;
+}
+
+static MemTxResult its_writel(GICv3ITSState *s, hwaddr offset,
+ uint64_t value, MemTxAttrs attrs)
+{
+ MemTxResult result = MEMTX_OK;
+
+ return result;
+}
+
+static MemTxResult its_readl(GICv3ITSState *s, hwaddr offset,
+ uint64_t *data, MemTxAttrs attrs)
+{
+ MemTxResult result = MEMTX_OK;
+
+ return result;
+}
+
+static MemTxResult its_writell(GICv3ITSState *s, hwaddr offset,
+ uint64_t value, MemTxAttrs attrs)
+{
+ MemTxResult result = MEMTX_OK;
+
+ return result;
+}
+
+static MemTxResult its_readll(GICv3ITSState *s, hwaddr offset,
+ uint64_t *data, MemTxAttrs attrs)
+{
+ MemTxResult result = MEMTX_OK;
+
+ return result;
+}
+
+static MemTxResult gicv3_its_read(void *opaque, hwaddr offset, uint64_t *data,
+ unsigned size, MemTxAttrs attrs)
+{
+ GICv3ITSState *s = (GICv3ITSState *)opaque;
+ MemTxResult result;
+
+ switch (size) {
+ case 4:
+ result = its_readl(s, offset, data, attrs);
+ break;
+ case 8:
+ result = its_readll(s, offset, data, attrs);
+ break;
+ default:
+ result = MEMTX_ERROR;
+ break;
+ }
+
+ if (result == MEMTX_ERROR) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: invalid guest read at offset " TARGET_FMT_plx
+ "size %u\n", __func__, offset, size);
+ /*
+ * The spec requires that reserved registers are RAZ/WI;
+ * so use MEMTX_ERROR returns from leaf functions as a way to
+ * trigger the guest-error logging but don't return it to
+ * the caller, or we'll cause a spurious guest data abort.
+ */
+ result = MEMTX_OK;
+ *data = 0;
+ }
+ return result;
+}
+
+static MemTxResult gicv3_its_write(void *opaque, hwaddr offset, uint64_t data,
+ unsigned size, MemTxAttrs attrs)
+{
+ GICv3ITSState *s = (GICv3ITSState *)opaque;
+ MemTxResult result;
+
+ switch (size) {
+ case 4:
+ result = its_writel(s, offset, data, attrs);
+ break;
+ case 8:
+ result = its_writell(s, offset, data, attrs);
+ break;
+ default:
+ result = MEMTX_ERROR;
+ break;
+ }
+
+ if (result == MEMTX_ERROR) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: invalid guest write at offset " TARGET_FMT_plx
+ "size %u\n", __func__, offset, size);
+ /*
+ * The spec requires that reserved registers are RAZ/WI;
+ * so use MEMTX_ERROR returns from leaf functions as a way to
+ * trigger the guest-error logging but don't return it to
+ * the caller, or we'll cause a spurious guest data abort.
+ */
+ result = MEMTX_OK;
+ }
+ return result;
+}
+
+static const MemoryRegionOps gicv3_its_control_ops = {
+ .read_with_attrs = gicv3_its_read,
+ .write_with_attrs = gicv3_its_write,
+ .valid.min_access_size = 4,
+ .valid.max_access_size = 8,
+ .impl.min_access_size = 4,
+ .impl.max_access_size = 8,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static const MemoryRegionOps gicv3_its_translation_ops = {
+ .write_with_attrs = gicv3_its_translation_write,
+ .valid.min_access_size = 2,
+ .valid.max_access_size = 4,
+ .impl.min_access_size = 2,
+ .impl.max_access_size = 4,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static void gicv3_arm_its_realize(DeviceState *dev, Error **errp)
+{
+ GICv3ITSState *s = ARM_GICV3_ITS_COMMON(dev);
+
+ gicv3_its_init_mmio(s, &gicv3_its_control_ops, &gicv3_its_translation_ops);
+
+ if (s->gicv3->cpu->gicr_typer & GICR_TYPER_PLPIS) {
+ /* set the ITS default features supported */
+ s->typer = FIELD_DP64(s->typer, GITS_TYPER, PHYSICAL,
+ GITS_TYPE_PHYSICAL);
+ s->typer = FIELD_DP64(s->typer, GITS_TYPER, ITT_ENTRY_SIZE,
+ ITS_ITT_ENTRY_SIZE - 1);
+ s->typer = FIELD_DP64(s->typer, GITS_TYPER, IDBITS, ITS_IDBITS);
+ s->typer = FIELD_DP64(s->typer, GITS_TYPER, DEVBITS, ITS_DEVBITS);
+ s->typer = FIELD_DP64(s->typer, GITS_TYPER, CIL, 1);
+ s->typer = FIELD_DP64(s->typer, GITS_TYPER, CIDBITS, ITS_CIDBITS);
+ }
+}
+
+static void gicv3_its_reset(DeviceState *dev)
+{
+ GICv3ITSState *s = ARM_GICV3_ITS_COMMON(dev);
+ GICv3ITSClass *c = ARM_GICV3_ITS_GET_CLASS(s);
+
+ if (s->gicv3->cpu->gicr_typer & GICR_TYPER_PLPIS) {
+ c->parent_reset(dev);
+
+ /* Quiescent bit reset to 1 */
+ s->ctlr = FIELD_DP32(s->ctlr, GITS_CTLR, QUIESCENT, 1);
+
+ /*
+ * setting GITS_BASER0.Type = 0b001 (Device)
+ * GITS_BASER1.Type = 0b100 (Collection Table)
+ * GITS_BASER<n>.Type,where n = 3 to 7 are 0b00 (Unimplemented)
+ * GITS_BASER<0,1>.Page_Size = 64KB
+ * and default translation table entry size to 16 bytes
+ */
+ s->baser[0] = FIELD_DP64(s->baser[0], GITS_BASER, TYPE,
+ GITS_ITT_TYPE_DEVICE);
+ s->baser[0] = FIELD_DP64(s->baser[0], GITS_BASER, PAGESIZE,
+ GITS_BASER_PAGESIZE_64K);
+ s->baser[0] = FIELD_DP64(s->baser[0], GITS_BASER, ENTRYSIZE,
+ GITS_DTE_SIZE - 1);
+
+ s->baser[1] = FIELD_DP64(s->baser[1], GITS_BASER, TYPE,
+ GITS_ITT_TYPE_COLLECTION);
+ s->baser[1] = FIELD_DP64(s->baser[1], GITS_BASER, PAGESIZE,
+ GITS_BASER_PAGESIZE_64K);
+ s->baser[1] = FIELD_DP64(s->baser[1], GITS_BASER, ENTRYSIZE,
+ GITS_CTE_SIZE - 1);
+ }
+}
+
+static Property gicv3_its_props[] = {
+ DEFINE_PROP_LINK("parent-gicv3", GICv3ITSState, gicv3, "arm-gicv3",
+ GICv3State *),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void gicv3_its_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ GICv3ITSClass *ic = ARM_GICV3_ITS_CLASS(klass);
+
+ dc->realize = gicv3_arm_its_realize;
+ device_class_set_props(dc, gicv3_its_props);
+ device_class_set_parent_reset(dc, gicv3_its_reset, &ic->parent_reset);
+}
+
+static const TypeInfo gicv3_its_info = {
+ .name = TYPE_ARM_GICV3_ITS,
+ .parent = TYPE_ARM_GICV3_ITS_COMMON,
+ .instance_size = sizeof(GICv3ITSState),
+ .class_init = gicv3_its_class_init,
+ .class_size = sizeof(GICv3ITSClass),
+};
+
+static void gicv3_its_register_types(void)
+{
+ type_register_static(&gicv3_its_info);
+}
+
+type_init(gicv3_its_register_types)
@@ -50,12 +50,13 @@ static int gicv3_its_post_load(void *opaque, int version_id)
static const VMStateDescription vmstate_its = {
.name = "arm_gicv3_its",
+ .version_id = 1,
+ .minimum_version_id = 1,
.pre_save = gicv3_its_pre_save,
.post_load = gicv3_its_post_load,
.priority = MIG_PRI_GICV3_ITS,
.fields = (VMStateField[]) {
VMSTATE_UINT32(ctlr, GICv3ITSState),
- VMSTATE_UINT32(iidr, GICv3ITSState),
VMSTATE_UINT64(cbaser, GICv3ITSState),
VMSTATE_UINT64(cwriter, GICv3ITSState),
VMSTATE_UINT64(creadr, GICv3ITSState),
@@ -99,15 +100,16 @@ static const MemoryRegionOps gicv3_its_trans_ops = {
.endianness = DEVICE_NATIVE_ENDIAN,
};
-void gicv3_its_init_mmio(GICv3ITSState *s, const MemoryRegionOps *ops)
+void gicv3_its_init_mmio(GICv3ITSState *s, const MemoryRegionOps *ops,
+ const MemoryRegionOps *tops)
{
SysBusDevice *sbd = SYS_BUS_DEVICE(s);
memory_region_init_io(&s->iomem_its_cntrl, OBJECT(s), ops, s,
"control", ITS_CONTROL_SIZE);
memory_region_init_io(&s->iomem_its_translation, OBJECT(s),
- &gicv3_its_trans_ops, s,
- "translation", ITS_TRANS_SIZE);
+ tops ? tops : &gicv3_its_trans_ops, s,
+ "translation", ITS_TRANS_SIZE);
/* Our two regions are always adjacent, therefore we now combine them
* into a single one in order to make our users' life easier.
@@ -129,7 +131,6 @@ static void gicv3_its_common_reset(DeviceState *dev)
s->cbaser = 0;
s->cwriter = 0;
s->creadr = 0;
- s->iidr = 0;
memset(&s->baser, 0, sizeof(s->baser));
}
@@ -106,7 +106,7 @@ static void kvm_arm_its_realize(DeviceState *dev, Error **errp)
kvm_arm_register_device(&s->iomem_its_cntrl, -1, KVM_DEV_ARM_VGIC_GRP_ADDR,
KVM_VGIC_ITS_ADDR_TYPE, s->dev_fd, 0);
- gicv3_its_init_mmio(s, NULL);
+ gicv3_its_init_mmio(s, NULL, NULL);
if (!kvm_device_check_attr(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_ITS_REGS,
GITS_CTLR)) {
@@ -24,6 +24,7 @@
#ifndef QEMU_ARM_GICV3_INTERNAL_H
#define QEMU_ARM_GICV3_INTERNAL_H
+#include "hw/registerfields.h"
#include "hw/intc/arm_gicv3_common.h"
/* Distributor registers, as offsets from the distributor base address */
@@ -67,6 +68,9 @@
#define GICD_CTLR_E1NWF (1U << 7)
#define GICD_CTLR_RWP (1U << 31)
+/* 16 bits EventId */
+#define GICD_TYPER_IDBITS 0xf
+
/*
* Redistributor frame offsets from RD_base
*/
@@ -122,18 +126,6 @@
#define GICR_WAKER_ProcessorSleep (1U << 1)
#define GICR_WAKER_ChildrenAsleep (1U << 2)
-#define GICR_PROPBASER_OUTER_CACHEABILITY_MASK (7ULL << 56)
-#define GICR_PROPBASER_ADDR_MASK (0xfffffffffULL << 12)
-#define GICR_PROPBASER_SHAREABILITY_MASK (3U << 10)
-#define GICR_PROPBASER_CACHEABILITY_MASK (7U << 7)
-#define GICR_PROPBASER_IDBITS_MASK (0x1f)
-
-#define GICR_PENDBASER_PTZ (1ULL << 62)
-#define GICR_PENDBASER_OUTER_CACHEABILITY_MASK (7ULL << 56)
-#define GICR_PENDBASER_ADDR_MASK (0xffffffffULL << 16)
-#define GICR_PENDBASER_SHAREABILITY_MASK (3U << 10)
-#define GICR_PENDBASER_CACHEABILITY_MASK (7U << 7)
-
#define ICC_CTLR_EL1_CBPR (1U << 0)
#define ICC_CTLR_EL1_EOIMODE (1U << 1)
#define ICC_CTLR_EL1_PMHE (1U << 6)
@@ -239,6 +231,78 @@
#define ICH_VTR_EL2_PREBITS_SHIFT 26
#define ICH_VTR_EL2_PRIBITS_SHIFT 29
+/* ITS Registers */
+
+FIELD(GITS_BASER, SIZE, 0, 8)
+FIELD(GITS_BASER, PAGESIZE, 8, 2)
+FIELD(GITS_BASER, SHAREABILITY, 10, 2)
+FIELD(GITS_BASER, PHYADDR, 12, 36)
+FIELD(GITS_BASER, PHYADDRL_64K, 16, 32)
+FIELD(GITS_BASER, PHYADDRH_64K, 48, 4)
+FIELD(GITS_BASER, ENTRYSIZE, 48, 5)
+FIELD(GITS_BASER, OUTERCACHE, 53, 3)
+FIELD(GITS_BASER, TYPE, 56, 3)
+FIELD(GITS_BASER, INNERCACHE, 59, 3)
+FIELD(GITS_BASER, INDIRECT, 62, 1)
+FIELD(GITS_BASER, VALID, 63, 1)
+
+FIELD(GITS_CTLR, QUIESCENT, 31, 1)
+
+FIELD(GITS_TYPER, PHYSICAL, 0, 1)
+FIELD(GITS_TYPER, ITT_ENTRY_SIZE, 4, 4)
+FIELD(GITS_TYPER, IDBITS, 8, 5)
+FIELD(GITS_TYPER, DEVBITS, 13, 5)
+FIELD(GITS_TYPER, SEIS, 18, 1)
+FIELD(GITS_TYPER, PTA, 19, 1)
+FIELD(GITS_TYPER, CIDBITS, 32, 4)
+FIELD(GITS_TYPER, CIL, 36, 1)
+
+#define GITS_BASER_PAGESIZE_4K 0
+#define GITS_BASER_PAGESIZE_16K 1
+#define GITS_BASER_PAGESIZE_64K 2
+
+#define GITS_ITT_TYPE_DEVICE 1ULL
+#define GITS_ITT_TYPE_COLLECTION 4ULL
+
+/**
+ * Default features advertised by this version of ITS
+ */
+/* Physical LPIs supported */
+#define GITS_TYPE_PHYSICAL (1U << 0)
+
+/*
+ * 12 bytes Interrupt translation Table Entry size
+ * ITE Lower 8 Bytes
+ * Valid = 1 bit,InterruptType = 1 bit,
+ * Size of LPI number space[considering max 24 bits],
+ * Size of LPI number space[considering max 24 bits],
+ * ITE Higher 4 Bytes
+ * ICID = 16 bits,
+ * vPEID = 16 bits
+ */
+#define ITS_ITT_ENTRY_SIZE 0xC
+
+/* 16 bits EventId */
+#define ITS_IDBITS GICD_TYPER_IDBITS
+
+/* 16 bits DeviceId */
+#define ITS_DEVBITS 0xF
+
+/* 16 bits CollectionId */
+#define ITS_CIDBITS 0xF
+
+/*
+ * 8 bytes Device Table Entry size
+ * Valid = 1 bit,ITTAddr = 44 bits,Size = 5 bits
+ */
+#define GITS_DTE_SIZE (0x8ULL)
+
+/*
+ * 8 bytes Collection Table Entry size
+ * Valid = 1 bit,RDBase = 36 bits(considering max RDBASE)
+ */
+#define GITS_CTE_SIZE (0x8ULL)
+
/* Special interrupt IDs */
#define INTID_SECURE 1020
#define INTID_NONSECURE 1021
@@ -8,6 +8,7 @@ softmmu_ss.add(when: 'CONFIG_ARM_GIC', if_true: files(
'arm_gicv3_dist.c',
'arm_gicv3_its_common.c',
'arm_gicv3_redist.c',
+ 'arm_gicv3_its.c',
))
softmmu_ss.add(when: 'CONFIG_ETRAXFS', if_true: files('etraxfs_pic.c'))
softmmu_ss.add(when: 'CONFIG_HEATHROW_PIC', if_true: files('heathrow_pic.c'))
@@ -25,17 +25,22 @@
#include "hw/intc/arm_gicv3_common.h"
#include "qom/object.h"
+#define TYPE_ARM_GICV3_ITS "arm-gicv3-its"
+
#define ITS_CONTROL_SIZE 0x10000
#define ITS_TRANS_SIZE 0x10000
#define ITS_SIZE (ITS_CONTROL_SIZE + ITS_TRANS_SIZE)
#define GITS_CTLR 0x0
#define GITS_IIDR 0x4
+#define GITS_TYPER 0x8
#define GITS_CBASER 0x80
#define GITS_CWRITER 0x88
#define GITS_CREADR 0x90
#define GITS_BASER 0x100
+#define GITS_TRANSLATER 0x0040
+
struct GICv3ITSState {
SysBusDevice parent_obj;
@@ -51,7 +56,7 @@ struct GICv3ITSState {
/* Registers */
uint32_t ctlr;
- uint32_t iidr;
+ uint64_t typer;
uint64_t cbaser;
uint64_t cwriter;
uint64_t creadr;
@@ -62,7 +67,8 @@ struct GICv3ITSState {
typedef struct GICv3ITSState GICv3ITSState;
-void gicv3_its_init_mmio(GICv3ITSState *s, const MemoryRegionOps *ops);
+void gicv3_its_init_mmio(GICv3ITSState *s, const MemoryRegionOps *ops,
+ const MemoryRegionOps *tops);
#define TYPE_ARM_GICV3_ITS_COMMON "arm-gicv3-its-common"
typedef struct GICv3ITSCommonClass GICv3ITSCommonClass;
Added register definitions relevant to ITS,implemented overall ITS device framework with stubs for ITS control and translater regions read/write,extended ITS common to handle mmio init between existing kvm device and newer qemu device. Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org> --- hw/intc/arm_gicv3_its.c | 239 +++++++++++++++++++++++++ hw/intc/arm_gicv3_its_common.c | 11 +- hw/intc/arm_gicv3_its_kvm.c | 2 +- hw/intc/gicv3_internal.h | 88 +++++++-- hw/intc/meson.build | 1 + include/hw/intc/arm_gicv3_its_common.h | 10 +- 6 files changed, 331 insertions(+), 20 deletions(-) create mode 100644 hw/intc/arm_gicv3_its.c -- 2.27.0