diff mbox series

[RFC,net-next,v2,03/17] net: mdio: ipq8064: enlarge sleep after read/write operation

Message ID 20210502230710.30676-3-ansuelsmth@gmail.com
State Superseded
Headers show
Series [RFC,net-next,v2,01/17] net: mdio: ipq8064: clean whitespaces in define | expand

Commit Message

Christian Marangi May 2, 2021, 11:06 p.m. UTC
With the use of the qca8k dsa driver, some problem arised related to
port status detection. With a load on a specific port (for example a
simple speed test), the driver starts to behave in a strange way and
garbage data is produced. To address this, enlarge the sleep delay and
address a bug for the reg offset 31 that require additional delay for
this specific reg.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/net/mdio/mdio-ipq8064.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/mdio/mdio-ipq8064.c b/drivers/net/mdio/mdio-ipq8064.c
index 8ae5379eda9d..bba2fb0d6af8 100644
--- a/drivers/net/mdio/mdio-ipq8064.c
+++ b/drivers/net/mdio/mdio-ipq8064.c
@@ -65,7 +65,7 @@  ipq8064_mdio_read(struct mii_bus *bus, int phy_addr, int reg_offset)
 		   ((reg_offset << MII_REG_SHIFT) & MII_REG_MASK);
 
 	writel(miiaddr, priv->base + MII_ADDR_REG_ADDR);
-	usleep_range(8, 10);
+	usleep_range(10, 13);
 
 	err = ipq8064_mdio_wait_busy(priv);
 	if (err)
@@ -90,7 +90,14 @@  ipq8064_mdio_write(struct mii_bus *bus, int phy_addr, int reg_offset, u16 data)
 		   ((reg_offset << MII_REG_SHIFT) & MII_REG_MASK);
 
 	writel(miiaddr, priv->base + MII_ADDR_REG_ADDR);
-	usleep_range(8, 10);
+
+	/* For the specific reg 31 extra time is needed or the next
+	 * read will produce garbage data.
+	 */
+	if (reg_offset == 31)
+		usleep_range(30, 43);
+	else
+		usleep_range(10, 13);
 
 	return ipq8064_mdio_wait_busy(priv);
 }