diff mbox series

[v4,4/5] staging: fbtft: Replace custom ->reset() with generic one

Message ID 20210503172114.27891-5-andriy.shevchenko@linux.intel.com
State New
Headers show
Series [v4,1/5] staging: fbtft: Rectify GPIO handling | expand

Commit Message

Andy Shevchenko May 3, 2021, 5:21 p.m. UTC 
The custom ->reset() repeats the generic one, replace it.

Note, in newer kernels the context of the function is a sleeping one,
it's fine to switch over to the sleeping functions. Keeping the reset
line asserted longer than 20 microseconds is also okay, it's an idling
state of the hardware.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/staging/fbtft/fb_agm1264k-fl.c | 14 --------------
 1 file changed, 14 deletions(-)
diff mbox series

Patch

diff --git a/drivers/staging/fbtft/fb_agm1264k-fl.c b/drivers/staging/fbtft/fb_agm1264k-fl.c
index b545c2ca80a4..207d578547cd 100644
--- a/drivers/staging/fbtft/fb_agm1264k-fl.c
+++ b/drivers/staging/fbtft/fb_agm1264k-fl.c
@@ -77,19 +77,6 @@  static int init_display(struct fbtft_par *par)
 	return 0;
 }
 
-static void reset(struct fbtft_par *par)
-{
-	if (!par->gpio.reset)
-		return;
-
-	dev_dbg(par->info->device, "%s()\n", __func__);
-
-	gpiod_set_value(par->gpio.reset, 1);
-	udelay(20);
-	gpiod_set_value(par->gpio.reset, 0);
-	mdelay(120);
-}
-
 /* Check if all necessary GPIOS defined */
 static int verify_gpios(struct fbtft_par *par)
 {
@@ -439,7 +426,6 @@  static struct fbtft_display display = {
 		.set_addr_win = set_addr_win,
 		.verify_gpios = verify_gpios,
 		.request_gpios_match = request_gpios_match,
-		.reset = reset,
 		.write = write,
 		.write_register = write_reg8_bus8,
 		.write_vmem = write_vmem,