| Message ID | 20210503184100.1503307-1-clabbe@baylibre.com |
|---|---|
| State | New |
| Headers | show |
| Series | [v4] dt-bindings: net: Convert mdio-gpio to yaml | expand |
On Mon, May 03, 2021 at 06:41:00PM +0000, Corentin Labbe wrote: > Converts net/mdio-gpio.txt to yaml > > Reviewed-by: Andrew Lunn <andrew@lunn.ch> > Signed-off-by: Corentin Labbe <clabbe@baylibre.com> > --- > Changes since v1: > - fixes yamllint warning about indent > - added maxItems 3 > > Changes since v2: > - fixed example (gpios need 2 entries) > > Changes since v3: > - fixed gpios description > - added additionalProperties/type: object > > .../devicetree/bindings/net/mdio-gpio.txt | 27 --------- > .../devicetree/bindings/net/mdio-gpio.yaml | 58 +++++++++++++++++++ > 2 files changed, 58 insertions(+), 27 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/net/mdio-gpio.txt > create mode 100644 Documentation/devicetree/bindings/net/mdio-gpio.yaml > > diff --git a/Documentation/devicetree/bindings/net/mdio-gpio.txt b/Documentation/devicetree/bindings/net/mdio-gpio.txt > deleted file mode 100644 > index 4d91a36c5cf5..000000000000 > --- a/Documentation/devicetree/bindings/net/mdio-gpio.txt > +++ /dev/null > @@ -1,27 +0,0 @@ > -MDIO on GPIOs > - > -Currently defined compatibles: > -- virtual,gpio-mdio > -- microchip,mdio-smi0 > - > -MDC and MDIO lines connected to GPIO controllers are listed in the > -gpios property as described in section VIII.1 in the following order: > - > -MDC, MDIO. > - > -Note: Each gpio-mdio bus should have an alias correctly numbered in "aliases" > -node. > - > -Example: > - > -aliases { > - mdio-gpio0 = &mdio0; > -}; > - > -mdio0: mdio { > - compatible = "virtual,mdio-gpio"; > - #address-cells = <1>; > - #size-cells = <0>; > - gpios = <&qe_pio_a 11 > - &qe_pio_c 6>; > -}; > diff --git a/Documentation/devicetree/bindings/net/mdio-gpio.yaml b/Documentation/devicetree/bindings/net/mdio-gpio.yaml > new file mode 100644 > index 000000000000..236a8c4768e2 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/mdio-gpio.yaml > @@ -0,0 +1,58 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/net/mdio-gpio.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: MDIO on GPIOs > + > +maintainers: > + - Andrew Lunn <andrew@lunn.ch> > + - Florian Fainelli <f.fainelli@gmail.com> > + - Heiner Kallweit <hkallweit1@gmail.com> I think your information is outdated here. As the original does not contain this information, and maintainers no longer lists Florian, I can only guess that this patch was created some time ago? Please update this with the latest from MAINTAINERS, thanks. > + > +allOf: > + - $ref: "mdio.yaml#" > + > +properties: > + compatible: > + enum: > + - virtual,mdio-gpio > + - microchip,mdio-smi0 > + > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 > + > + gpios: > + minItems: 2 > + maxItems: 3 > + items: > + - description: MDC > + - description: MDIO > + - description: MDO > + > +#Note: Each gpio-mdio bus should have an alias correctly numbered in "aliases" > +#node. > +additionalProperties: > + type: object > + > +examples: > + - | > + aliases { > + mdio-gpio0 = &mdio0; > + }; > + > + mdio0: mdio { > + compatible = "virtual,mdio-gpio"; > + #address-cells = <1>; > + #size-cells = <0>; > + gpios = <&qe_pio_a 11>, > + <&qe_pio_c 6>; > + ethphy0: ethernet-phy@0 { > + reg = <0>; > + }; > + }; > +... > -- > 2.26.3 > >
diff --git a/Documentation/devicetree/bindings/net/mdio-gpio.txt b/Documentation/devicetree/bindings/net/mdio-gpio.txt deleted file mode 100644 index 4d91a36c5cf5..000000000000 --- a/Documentation/devicetree/bindings/net/mdio-gpio.txt +++ /dev/null @@ -1,27 +0,0 @@ -MDIO on GPIOs - -Currently defined compatibles: -- virtual,gpio-mdio -- microchip,mdio-smi0 - -MDC and MDIO lines connected to GPIO controllers are listed in the -gpios property as described in section VIII.1 in the following order: - -MDC, MDIO. - -Note: Each gpio-mdio bus should have an alias correctly numbered in "aliases" -node. - -Example: - -aliases { - mdio-gpio0 = &mdio0; -}; - -mdio0: mdio { - compatible = "virtual,mdio-gpio"; - #address-cells = <1>; - #size-cells = <0>; - gpios = <&qe_pio_a 11 - &qe_pio_c 6>; -}; diff --git a/Documentation/devicetree/bindings/net/mdio-gpio.yaml b/Documentation/devicetree/bindings/net/mdio-gpio.yaml new file mode 100644 index 000000000000..236a8c4768e2 --- /dev/null +++ b/Documentation/devicetree/bindings/net/mdio-gpio.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/mdio-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MDIO on GPIOs + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + - Florian Fainelli <f.fainelli@gmail.com> + - Heiner Kallweit <hkallweit1@gmail.com> + +allOf: + - $ref: "mdio.yaml#" + +properties: + compatible: + enum: + - virtual,mdio-gpio + - microchip,mdio-smi0 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + gpios: + minItems: 2 + maxItems: 3 + items: + - description: MDC + - description: MDIO + - description: MDO + +#Note: Each gpio-mdio bus should have an alias correctly numbered in "aliases" +#node. +additionalProperties: + type: object + +examples: + - | + aliases { + mdio-gpio0 = &mdio0; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&qe_pio_a 11>, + <&qe_pio_c 6>; + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + }; +...