diff mbox series

[RFC,v2,2/5] Input: goodix - platform/x86: touchscreen_dmi - Move inverted-x quirk to touchscreen_dmi.c

Message ID 20210504185746.175461-3-hdegoede@redhat.com
State New
Headers show
Series Input: goodix - platform/x86: touchscreen_dmi - Move quirks to touchscreen_dmi.c | expand

Commit Message

Hans de Goede May 4, 2021, 6:57 p.m. UTC
Move the DMI quirk for the Goodix touchscreen with inverted X coordinates
found on the Cube I15-TC tablet from drivers/input/touchscreen/goodix.c to
drivers/platform/x86/touchscreen_dmi.c, where all the other x86
touchscreen quirks live.

Cc: Arkadiy <arkan49@yandex.ru>
Cc: Sergei A. Trusov <sergei.a.trusov@ya.ru>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/input/touchscreen/goodix.c     | 22 ----------------------
 drivers/platform/x86/touchscreen_dmi.c | 19 +++++++++++++++++++
 2 files changed, 19 insertions(+), 22 deletions(-)
diff mbox series

Patch

diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index d92f6b2b6dcf..2203ad4d8e30 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -131,22 +131,6 @@  static const struct dmi_system_id nine_bytes_report[] = {
 	{}
 };
 
-/*
- * Those tablets have their x coordinate inverted
- */
-static const struct dmi_system_id inverted_x_screen[] = {
-#if defined(CONFIG_DMI) && defined(CONFIG_X86)
-	{
-		.ident = "Cube I15-TC",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Cube"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "I15-TC")
-		},
-	},
-#endif
-	{}
-};
-
 /**
  * goodix_i2c_read - read data from a register of the i2c slave device.
  *
@@ -1048,12 +1032,6 @@  static int goodix_configure_dev(struct goodix_ts_data *ts)
 			"Non-standard 9-bytes report format quirk\n");
 	}
 
-	if (dmi_check_system(inverted_x_screen)) {
-		ts->prop.invert_x = true;
-		dev_dbg(&ts->client->dev,
-			"Applying 'inverted x screen' quirk\n");
-	}
-
 	error = input_mt_init_slots(ts->input_dev, ts->max_touch_num,
 				    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
 	if (error) {
diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c
index a53e176d94b9..e0ea8a1b4c6c 100644
--- a/drivers/platform/x86/touchscreen_dmi.c
+++ b/drivers/platform/x86/touchscreen_dmi.c
@@ -218,6 +218,17 @@  static const struct ts_dmi_data cube_iwork8_air_data = {
 	.properties	= cube_iwork8_air_props,
 };
 
+static const struct property_entry cube_iwork10_ultimate_i15_tc_props[] = {
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-x"),
+	{ }
+};
+
+static const struct ts_dmi_data cube_iwork10_ultimate_i15_tc_data = {
+	.acpi_name	= "GDIX1001:00",
+	.properties	= cube_iwork10_ultimate_i15_tc_props,
+};
+
+
 static const struct property_entry cube_knote_i1101_props[] = {
 	PROPERTY_ENTRY_U32("touchscreen-min-x", 20),
 	PROPERTY_ENTRY_U32("touchscreen-min-y",  22),
@@ -985,6 +996,14 @@  const struct dmi_system_id touchscreen_dmi_table[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"),
 		},
 	},
+	{
+		/* CUBE iWork10 Ultimate (I15-TC) */
+		.driver_data = (void *)&cube_iwork10_ultimate_i15_tc_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Cube"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "I15-TC")
+		},
+	},
 	{
 		/* Cube KNote i1101 */
 		.driver_data = (void *)&cube_knote_i1101_data,