diff mbox series

[21/69] net: stmicro: handle clk_prepare() failure during init

Message ID 20210503115736.2104747-22-gregkh@linuxfoundation.org
State Accepted
Commit 0c32a96d000f260b5ebfabb4145a86ae1cd71847
Headers show
Series None | expand

Commit Message

Greg KH May 3, 2021, 11:56 a.m. UTC 
From: Anirudh Rayabharam <mail@anirudhrb.com>

In case clk_prepare() fails, capture and propagate the error code up the
stack. If regulator_enable() was called earlier, properly unwind it by
calling regulator_disable().

Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
index fc68e90acbea..fc3b0acc8f99 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
@@ -30,7 +30,7 @@  struct sunxi_priv_data {
 static int sun7i_gmac_init(struct platform_device *pdev, void *priv)
 {
 	struct sunxi_priv_data *gmac = priv;
-	int ret;
+	int ret = 0;
 
 	if (gmac->regulator) {
 		ret = regulator_enable(gmac->regulator);
@@ -50,10 +50,12 @@  static int sun7i_gmac_init(struct platform_device *pdev, void *priv)
 		gmac->clk_enabled = 1;
 	} else {
 		clk_set_rate(gmac->tx_clk, SUN7I_GMAC_MII_RATE);
-		clk_prepare(gmac->tx_clk);
+		ret = clk_prepare(gmac->tx_clk);
+		if (ret && gmac->regulator)
+			regulator_disable(gmac->regulator);
 	}
 
-	return 0;
+	return ret;
 }
 
 static void sun7i_gmac_exit(struct platform_device *pdev, void *priv)