[2/3] powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers

Message ID 20210506011015.17347-3-chris.packham@alliedtelesis.co.nz
State Superseded
Headers show
Series
  • P2040/P2041 i2c recovery erratum
Related show

Commit Message

Chris Packham May 6, 2021, 1:10 a.m.
The i2c controllers on the P2040/P2041 have an erratum where the
documented scheme for i2c bus recovery will not work (A-004447). A
different mechanism is needed which is documented in the P2040 Chip
Errata Rev Q (latest available at the time of writing).

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
 arch/powerpc/boot/dts/fsl/p2041si-post.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

Patch

diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
index 872e4485dc3f..ddc018d42252 100644
--- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
@@ -371,7 +371,23 @@  sdhc@114000 {
 	};
 
 /include/ "qoriq-i2c-0.dtsi"
+	i2c@118000 {
+		fsl,i2c-erratum-a004447;
+	};
+
+	i2c@118100 {
+		fsl,i2c-erratum-a004447;
+	};
+
 /include/ "qoriq-i2c-1.dtsi"
+	i2c@119000 {
+		fsl,i2c-erratum-a004447;
+	};
+
+	i2c@119100 {
+		fsl,i2c-erratum-a004447;
+	};
+
 /include/ "qoriq-duart-0.dtsi"
 /include/ "qoriq-duart-1.dtsi"
 /include/ "qoriq-gpio-0.dtsi"