| Message ID | 1620322392-27148-5-git-send-email-gubbaven@codeaurora.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Enable Bluetooth functinality for WCN6750 | expand |
On Thu, May 06, 2021 at 11:03:11PM +0530, Venkata Lakshmi Narayana Gubba wrote: > Converted Qualcomm Bluetooth binidings to DT schema. > > Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org> > --- > .../devicetree/bindings/net/qualcomm-bluetooth.txt | 69 ------------- > .../bindings/net/qualcomm-bluetooth.yaml | 111 +++++++++++++++++++++ > 2 files changed, 111 insertions(+), 69 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt > create mode 100644 Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml > diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml > new file mode 100644 > index 0000000..3f3ec4d > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml > @@ -0,0 +1,111 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/net/qualcomm-bluetooth.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm Bluetooth Chips > + > +maintainers: > + - Marcel Holtmann <marcel@holtmann.org> This should be someone who cares about Qcom BT. Otherwise, Reviewed-by: Rob Herring <robh@kernel.org> > + > +description: > + This binding describes Qualcomm UART-attached bluetooth chips. > + > +properties: > + compatible: > + enum: > + - qcom,qca6174-bt > + - qcom,qca9377-bt > + - qcom,wcn3990-bt > + - qcom,wcn3991-bt > + - qcom,wcn3998-bt > + - qcom,qca6390-bt > + > + enable-gpios: > + maxItems: 1 > + description: gpio specifier used to enable chip > + > + clocks: > + maxItems: 1 > + description: clock provided to the controller (SUSCLK_32KHZ) > + > + vddio-supply: > + description: VDD_IO supply regulator handle > + > + vddxo-supply: > + description: VDD_XO supply regulator handle > + > + vddrf-supply: > + description: VDD_RF supply regulator handle > + > + vddch0-supply: > + description: VDD_CH0 supply regulator handle > + > + max-speed: > + description: see Documentation/devicetree/bindings/serial/serial.yaml > + > + firmware-name: > + description: specify the name of nvm firmware to load > + > + local-bd-address: > + description: see Documentation/devicetree/bindings/net/bluetooth.txt > + > + > +required: > + - compatible > + > +additionalProperties: false > + > +allOf: > + - if: > + properties: > + compatible: > + contains: > + enum: > + - qcom,qca6174-bt > + then: > + required: > + - enable-gpios > + - clocks > + > + - if: > + properties: > + compatible: > + contains: > + enum: > + - qcom,wcn3990-bt > + - qcom,wcn3991-bt > + - qcom,wcn3998-bt > + then: > + required: > + - vddio-supply > + - vddxo-supply > + - vddrf-supply > + - vddch0-supply > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + serial { > + > + bluetooth { > + compatible = "qcom,qca6174-bt"; > + enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; > + clocks = <&divclk4>; > + firmware-name = "nvm_00440302.bin"; > + }; > + }; > + - | > + serial { > + > + bluetooth { > + compatible = "qcom,wcn3990-bt"; > + vddio-supply = <&vreg_s4a_1p8>; > + vddxo-supply = <&vreg_l7a_1p8>; > + vddrf-supply = <&vreg_l17a_1p3>; > + vddch0-supply = <&vreg_l25a_3p3>; > + max-speed = <3200000>; > + firmware-name = "crnv21.bin"; > + }; > + }; > -- > QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member > of Code Aurora Forum, hosted by The Linux Foundation >
Hi Venkata, >> Converted Qualcomm Bluetooth binidings to DT schema. >> >> Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org> >> --- >> .../devicetree/bindings/net/qualcomm-bluetooth.txt | 69 ------------- >> .../bindings/net/qualcomm-bluetooth.yaml | 111 +++++++++++++++++++++ >> 2 files changed, 111 insertions(+), 69 deletions(-) >> delete mode 100644 Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt >> create mode 100644 Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml > > >> diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml >> new file mode 100644 >> index 0000000..3f3ec4d >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml >> @@ -0,0 +1,111 @@ >> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/net/qualcomm-bluetooth.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Qualcomm Bluetooth Chips >> + >> +maintainers: >> + - Marcel Holtmann <marcel@holtmann.org> > > This should be someone who cares about Qcom BT. yes, please, assign this to someone that knows the hardware. Rob, can we leave this out for now if there is no dedicated person? Regards Marcel
diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt deleted file mode 100644 index 709ca6d..0000000 --- a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt +++ /dev/null @@ -1,69 +0,0 @@ -Qualcomm Bluetooth Chips ---------------------- - -This documents the binding structure and common properties for serial -attached Qualcomm devices. - -Serial attached Qualcomm devices shall be a child node of the host UART -device the slave device is attached to. - -Required properties: - - compatible: should contain one of the following: - * "qcom,qca6174-bt" - * "qcom,qca9377-bt" - * "qcom,wcn3990-bt" - * "qcom,wcn3991-bt" - * "qcom,wcn3998-bt" - * "qcom,qca6390-bt" - -Optional properties for compatible string qcom,qca6174-bt: - - - enable-gpios: gpio specifier used to enable chip - - clocks: clock provided to the controller (SUSCLK_32KHZ) - - firmware-name: specify the name of nvm firmware to load - -Optional properties for compatible string qcom,qca9377-bt: - - - max-speed: see Documentation/devicetree/bindings/serial/serial.yaml - -Required properties for compatible string qcom,wcn399x-bt: - - - vddio-supply: VDD_IO supply regulator handle. - - vddxo-supply: VDD_XO supply regulator handle. - - vddrf-supply: VDD_RF supply regulator handle. - - vddch0-supply: VDD_CH0 supply regulator handle. - -Optional properties for compatible string qcom,wcn399x-bt: - - - max-speed: see Documentation/devicetree/bindings/serial/serial.yaml - - firmware-name: specify the name of nvm firmware to load - - clocks: clock provided to the controller - -Examples: - -serial@7570000 { - label = "BT-UART"; - status = "okay"; - - bluetooth { - compatible = "qcom,qca6174-bt"; - - enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; - clocks = <&divclk4>; - firmware-name = "nvm_00440302.bin"; - }; -}; - -serial@898000 { - bluetooth { - compatible = "qcom,wcn3990-bt"; - - vddio-supply = <&vreg_s4a_1p8>; - vddxo-supply = <&vreg_l7a_1p8>; - vddrf-supply = <&vreg_l17a_1p3>; - vddch0-supply = <&vreg_l25a_3p3>; - max-speed = <3200000>; - firmware-name = "crnv21.bin"; - clocks = <&rpmhcc RPMH_RF_CLK2>; - }; -}; diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml new file mode 100644 index 0000000..3f3ec4d --- /dev/null +++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml @@ -0,0 +1,111 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/qualcomm-bluetooth.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Bluetooth Chips + +maintainers: + - Marcel Holtmann <marcel@holtmann.org> + +description: + This binding describes Qualcomm UART-attached bluetooth chips. + +properties: + compatible: + enum: + - qcom,qca6174-bt + - qcom,qca9377-bt + - qcom,wcn3990-bt + - qcom,wcn3991-bt + - qcom,wcn3998-bt + - qcom,qca6390-bt + + enable-gpios: + maxItems: 1 + description: gpio specifier used to enable chip + + clocks: + maxItems: 1 + description: clock provided to the controller (SUSCLK_32KHZ) + + vddio-supply: + description: VDD_IO supply regulator handle + + vddxo-supply: + description: VDD_XO supply regulator handle + + vddrf-supply: + description: VDD_RF supply regulator handle + + vddch0-supply: + description: VDD_CH0 supply regulator handle + + max-speed: + description: see Documentation/devicetree/bindings/serial/serial.yaml + + firmware-name: + description: specify the name of nvm firmware to load + + local-bd-address: + description: see Documentation/devicetree/bindings/net/bluetooth.txt + + +required: + - compatible + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,qca6174-bt + then: + required: + - enable-gpios + - clocks + + - if: + properties: + compatible: + contains: + enum: + - qcom,wcn3990-bt + - qcom,wcn3991-bt + - qcom,wcn3998-bt + then: + required: + - vddio-supply + - vddxo-supply + - vddrf-supply + - vddch0-supply + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + serial { + + bluetooth { + compatible = "qcom,qca6174-bt"; + enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; + clocks = <&divclk4>; + firmware-name = "nvm_00440302.bin"; + }; + }; + - | + serial { + + bluetooth { + compatible = "qcom,wcn3990-bt"; + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + firmware-name = "crnv21.bin"; + }; + };
Converted Qualcomm Bluetooth binidings to DT schema. Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org> --- .../devicetree/bindings/net/qualcomm-bluetooth.txt | 69 ------------- .../bindings/net/qualcomm-bluetooth.yaml | 111 +++++++++++++++++++++ 2 files changed, 111 insertions(+), 69 deletions(-) delete mode 100644 Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt create mode 100644 Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml