diff mbox series

[5.4,018/184] mmc: sdhci-pci: Fix initialization of some SD cards for Intel BYT-based controllers

Message ID 20210510101950.819186437@linuxfoundation.org
State Superseded
Headers show
Series None | expand

Commit Message

Greg KH May 10, 2021, 10:18 a.m. UTC
From: Adrian Hunter <adrian.hunter@intel.com>

commit 2970134b927834e9249659a70aac48e62dff804a upstream.

Bus power may control card power, but the full reset done by SDHCI at
initialization still may not reset the power, whereas a direct write to
SDHCI_POWER_CONTROL can. That might be needed to initialize correctly, if
the card was left powered on previously.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210331081752.23621-1-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/host/sdhci-pci-core.c |   27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)
diff mbox series

Patch

--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -520,6 +520,7 @@  struct intel_host {
 	int	drv_strength;
 	bool	d3_retune;
 	bool	rpm_retune_ok;
+	bool	needs_pwr_off;
 	u32	glk_rx_ctrl1;
 	u32	glk_tun_val;
 	u32	active_ltr;
@@ -647,9 +648,25 @@  out:
 static void sdhci_intel_set_power(struct sdhci_host *host, unsigned char mode,
 				  unsigned short vdd)
 {
+	struct sdhci_pci_slot *slot = sdhci_priv(host);
+	struct intel_host *intel_host = sdhci_pci_priv(slot);
 	int cntr;
 	u8 reg;
 
+	/*
+	 * Bus power may control card power, but a full reset still may not
+	 * reset the power, whereas a direct write to SDHCI_POWER_CONTROL can.
+	 * That might be needed to initialize correctly, if the card was left
+	 * powered on previously.
+	 */
+	if (intel_host->needs_pwr_off) {
+		intel_host->needs_pwr_off = false;
+		if (mode != MMC_POWER_OFF) {
+			sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
+			usleep_range(10000, 12500);
+		}
+	}
+
 	sdhci_set_power(host, mode, vdd);
 
 	if (mode == MMC_POWER_OFF)
@@ -1139,6 +1156,14 @@  static int byt_sdio_probe_slot(struct sd
 	return 0;
 }
 
+static void byt_needs_pwr_off(struct sdhci_pci_slot *slot)
+{
+	struct intel_host *intel_host = sdhci_pci_priv(slot);
+	u8 reg = sdhci_readb(slot->host, SDHCI_POWER_CONTROL);
+
+	intel_host->needs_pwr_off = reg  & SDHCI_POWER_ON;
+}
+
 static int byt_sd_probe_slot(struct sdhci_pci_slot *slot)
 {
 	byt_probe_slot(slot);
@@ -1156,6 +1181,8 @@  static int byt_sd_probe_slot(struct sdhc
 	    slot->chip->pdev->subsystem_device == PCI_SUBDEVICE_ID_NI_78E3)
 		slot->host->mmc->caps2 |= MMC_CAP2_AVOID_3_3V;
 
+	byt_needs_pwr_off(slot);
+
 	return 0;
 }