@@ -20,6 +20,7 @@
#include <sound/tlv.h>
#include "cs53l30.h"
+#include "cirrus_legacy.h"
#define CS53L30_NUM_SUPPLIES 2
static const char *const cs53l30_supply_names[CS53L30_NUM_SUPPLIES] = {
@@ -920,9 +921,8 @@ static int cs53l30_i2c_probe(struct i2c_client *client,
const struct device_node *np = client->dev.of_node;
struct device *dev = &client->dev;
struct cs53l30_private *cs53l30;
- unsigned int devid = 0;
unsigned int reg;
- int ret = 0, i;
+ int ret = 0, i, devid;
u8 val;
cs53l30 = devm_kzalloc(dev, sizeof(*cs53l30), GFP_KERNEL);
@@ -951,7 +951,7 @@ static int cs53l30_i2c_probe(struct i2c_client *client,
GPIOD_OUT_LOW);
if (IS_ERR(cs53l30->reset_gpio)) {
ret = PTR_ERR(cs53l30->reset_gpio);
- goto error;
+ goto error_supplies;
}
gpiod_set_value_cansleep(cs53l30->reset_gpio, 1);
@@ -968,14 +968,12 @@ static int cs53l30_i2c_probe(struct i2c_client *client,
}
/* Initialize codec */
- ret = regmap_read(cs53l30->regmap, CS53L30_DEVID_AB, ®);
- devid = reg << 12;
-
- ret = regmap_read(cs53l30->regmap, CS53L30_DEVID_CD, ®);
- devid |= reg << 4;
-
- ret = regmap_read(cs53l30->regmap, CS53L30_DEVID_E, ®);
- devid |= (reg & 0xF0) >> 4;
+ devid = cirrus_read_device_id(cs53l30->regmap, CS53L30_DEVID_AB);
+ if (devid < 0) {
+ ret = devid;
+ dev_err(dev, "Failed to read device ID: %d\n", ret);
+ goto error;
+ }
if (devid != CS53L30_DEVID) {
ret = -ENODEV;
@@ -1037,6 +1035,8 @@ static int cs53l30_i2c_probe(struct i2c_client *client,
return 0;
error:
+ gpiod_set_value_cansleep(cs53l30->reset_gpio, 0);
+error_supplies:
regulator_bulk_disable(ARRAY_SIZE(cs53l30->supplies),
cs53l30->supplies);
return ret;
Correct some unchecked re-allocations of ret whilst reading the device ID and ensure the hardware state is returned to off on the error paths. Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> --- sound/soc/codecs/cs53l30.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-)