diff mbox series

[RFC,v3,01/12] firmware: arm_scmi, smccc, mailbox: Make shmem based transports optional

Message ID 20210511002040.802226-2-peter.hilber@opensynergy.com
State New
Headers show
Series [RFC,v3,01/12] firmware: arm_scmi, smccc, mailbox: Make shmem based transports optional | expand

Commit Message

Peter Hilber May 11, 2021, 12:20 a.m. UTC
From: Igor Skalkin <igor.skalkin@opensynergy.com>

Upon adding the virtio transport in this patch series, SCMI will also
work without shared memory based transports. Also, the mailbox transport
may not be needed if the smc transport is used.

- Compile shmem.c only if a shmem based transport is available.

- Remove hard dependency of SCMI on mailbox.

Signed-off-by: Igor Skalkin <igor.skalkin@opensynergy.com>
[ Peter: Adapted patch for submission to upstream. ]
Co-developed-by: Peter Hilber <peter.hilber@opensynergy.com>
Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com>
---
 drivers/firmware/Kconfig           | 8 +++++++-
 drivers/firmware/arm_scmi/Makefile | 2 +-
 drivers/firmware/arm_scmi/common.h | 2 ++
 drivers/firmware/arm_scmi/driver.c | 2 ++
 drivers/firmware/smccc/Kconfig     | 1 +
 drivers/mailbox/Kconfig            | 1 +
 6 files changed, 14 insertions(+), 2 deletions(-)

Comments

Jassi Brar June 21, 2021, 4:09 a.m. UTC | #1
On Mon, May 10, 2021 at 7:22 PM Peter Hilber
<peter.hilber@opensynergy.com> wrote:

.....

> --- a/drivers/mailbox/Kconfig

> +++ b/drivers/mailbox/Kconfig

> @@ -1,6 +1,7 @@

>  # SPDX-License-Identifier: GPL-2.0-only

>  menuconfig MAILBOX

>         bool "Mailbox Hardware Support"

> +       select ARM_SCMI_HAVE_SHMEM

>         help

>           Mailbox is a framework to control hardware communication between

>           on-chip processors through queued messages and interrupt driven

>

Isn't this too generic?
Not all platforms, with a mailbox controller, use SCMI as the protocol.

thnx.
Sudeep Holla June 21, 2021, 8:54 a.m. UTC | #2
On Sun, Jun 20, 2021 at 11:09:21PM -0500, Jassi Brar wrote:
> On Mon, May 10, 2021 at 7:22 PM Peter Hilber

> <peter.hilber@opensynergy.com> wrote:

> 

> .....

> 

> > --- a/drivers/mailbox/Kconfig

> > +++ b/drivers/mailbox/Kconfig

> > @@ -1,6 +1,7 @@

> >  # SPDX-License-Identifier: GPL-2.0-only

> >  menuconfig MAILBOX

> >         bool "Mailbox Hardware Support"

> > +       select ARM_SCMI_HAVE_SHMEM

> >         help

> >           Mailbox is a framework to control hardware communication between

> >           on-chip processors through queued messages and interrupt driven

> >

> Isn't this too generic?

> Not all platforms, with a mailbox controller, use SCMI as the protocol.

>


Yikes! I agree Jassi, this looks super hack.

-- 
Regards,
Sudeep
Cristian Marussi June 21, 2021, 9:01 a.m. UTC | #3
Hi,

On Mon, Jun 21, 2021 at 09:54:31AM +0100, Sudeep Holla wrote:
> On Sun, Jun 20, 2021 at 11:09:21PM -0500, Jassi Brar wrote:

> > On Mon, May 10, 2021 at 7:22 PM Peter Hilber

> > <peter.hilber@opensynergy.com> wrote:

> > 

> > .....

> > 

> > > --- a/drivers/mailbox/Kconfig

> > > +++ b/drivers/mailbox/Kconfig

> > > @@ -1,6 +1,7 @@

> > >  # SPDX-License-Identifier: GPL-2.0-only

> > >  menuconfig MAILBOX

> > >         bool "Mailbox Hardware Support"

> > > +       select ARM_SCMI_HAVE_SHMEM

> > >         help

> > >           Mailbox is a framework to control hardware communication between

> > >           on-chip processors through queued messages and interrupt driven

> > >

> > Isn't this too generic?

> > Not all platforms, with a mailbox controller, use SCMI as the protocol.

> >

> 

> Yikes! I agree Jassi, this looks super hack.

> 


Yes indeed, I have still to rework this part of the series.

(@Jassi: I'm reworking this series starting from the work done by Peter up to
V3, since it needed some core SCMI transport rework to ease implememtation of
virtio-scmi transport)

Thanks,
Cristian

> -- 

> Regards,

> Sudeep
diff mbox series

Patch

diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index db0ea2d2d75a..80ff49dadf35 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -9,7 +9,7 @@  menu "Firmware Drivers"
 config ARM_SCMI_PROTOCOL
 	tristate "ARM System Control and Management Interface (SCMI) Message Protocol"
 	depends on ARM || ARM64 || COMPILE_TEST
-	depends on MAILBOX
+	depends on ARM_SCMI_HAVE_SHMEM
 	help
 	  ARM System Control and Management Interface (SCMI) protocol is a
 	  set of operating system-independent software interfaces that are
@@ -27,6 +27,12 @@  config ARM_SCMI_PROTOCOL
 	  This protocol library provides interface for all the client drivers
 	  making use of the features offered by the SCMI.
 
+config ARM_SCMI_HAVE_SHMEM
+	bool
+	help
+	  This declares whether a shared memory based transport for SCMI is
+	  available.
+
 config ARM_SCMI_POWER_DOMAIN
 	tristate "SCMI power domain driver"
 	depends on ARM_SCMI_PROTOCOL || (COMPILE_TEST && OF)
diff --git a/drivers/firmware/arm_scmi/Makefile b/drivers/firmware/arm_scmi/Makefile
index 6a2ef63306d6..5a2d4c32e0ae 100644
--- a/drivers/firmware/arm_scmi/Makefile
+++ b/drivers/firmware/arm_scmi/Makefile
@@ -1,7 +1,7 @@ 
 # SPDX-License-Identifier: GPL-2.0-only
 scmi-bus-y = bus.o
 scmi-driver-y = driver.o notify.o
-scmi-transport-y = shmem.o
+scmi-transport-$(CONFIG_ARM_SCMI_HAVE_SHMEM) = shmem.o
 scmi-transport-$(CONFIG_MAILBOX) += mailbox.o
 scmi-transport-$(CONFIG_HAVE_ARM_SMCCC_DISCOVERY) += smc.o
 scmi-protocols-y = base.o clock.o perf.o power.o reset.o sensors.o system.o voltage.o
diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
index 228bf4a71d23..94dcfb8c0176 100644
--- a/drivers/firmware/arm_scmi/common.h
+++ b/drivers/firmware/arm_scmi/common.h
@@ -330,7 +330,9 @@  struct scmi_desc {
 	int max_msg_size;
 };
 
+#ifdef CONFIG_MAILBOX
 extern const struct scmi_desc scmi_mailbox_desc;
+#endif
 #ifdef CONFIG_HAVE_ARM_SMCCC
 extern const struct scmi_desc scmi_smc_desc;
 #endif
diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index 66eb3f0e5daf..41d80bbaa9a2 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -1567,7 +1567,9 @@  ATTRIBUTE_GROUPS(versions);
 
 /* Each compatible listed below must have descriptor associated with it */
 static const struct of_device_id scmi_of_match[] = {
+#ifdef CONFIG_MAILBOX
 	{ .compatible = "arm,scmi", .data = &scmi_mailbox_desc },
+#endif
 #ifdef CONFIG_HAVE_ARM_SMCCC_DISCOVERY
 	{ .compatible = "arm,scmi-smc", .data = &scmi_smc_desc},
 #endif
diff --git a/drivers/firmware/smccc/Kconfig b/drivers/firmware/smccc/Kconfig
index 15e7466179a6..69c4d6cabf62 100644
--- a/drivers/firmware/smccc/Kconfig
+++ b/drivers/firmware/smccc/Kconfig
@@ -9,6 +9,7 @@  config HAVE_ARM_SMCCC_DISCOVERY
 	bool
 	depends on ARM_PSCI_FW
 	default y
+	select ARM_SCMI_HAVE_SHMEM
 	help
 	 SMCCC v1.0 lacked discoverability and hence PSCI v1.0 was updated
 	 to add SMCCC discovery mechanism though the PSCI firmware
diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig
index 68de2c6af727..fc02c38c0739 100644
--- a/drivers/mailbox/Kconfig
+++ b/drivers/mailbox/Kconfig
@@ -1,6 +1,7 @@ 
 # SPDX-License-Identifier: GPL-2.0-only
 menuconfig MAILBOX
 	bool "Mailbox Hardware Support"
+	select ARM_SCMI_HAVE_SHMEM
 	help
 	  Mailbox is a framework to control hardware communication between
 	  on-chip processors through queued messages and interrupt driven