@@ -14,7 +14,7 @@ / {
compatible = "qcom,sm8350-hdk", "qcom,sm8350";
aliases {
- serial0 = &uart2;
+ serial0 = &uart3;
};
chosen {
@@ -219,7 +219,7 @@ &mpss {
firmware-name = "qcom/sm8350/modem.mbn";
};
-&qupv3_id_1 {
+&qupv3_id_0 {
status = "okay";
};
@@ -232,7 +232,7 @@ &tlmm {
gpio-reserved-ranges = <52 8>;
};
-&uart2 {
+&uart3 {
status = "okay";
};
@@ -20,7 +20,7 @@ / {
compatible = "qcom,sm8350-mtp", "qcom,sm8350";
aliases {
- serial0 = &uart2;
+ serial0 = &uart3;
};
chosen {
@@ -286,7 +286,7 @@ &mpss {
firmware-name = "qcom/sm8350/modem.mbn";
};
-&qupv3_id_1 {
+&qupv3_id_0 {
status = "okay";
};
@@ -299,7 +299,7 @@ &tlmm {
gpio-reserved-ranges = <52 8>;
};
-&uart2 {
+&uart3 {
status = "okay";
};
@@ -443,7 +443,7 @@ ipcc: mailbox@408000 {
#mbox-cells = <2>;
};
- qupv3_id_1: geniqup@9c0000 {
+ qupv3_id_0: geniqup@9c0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x009c0000 0x0 0x6000>;
clock-names = "m-ahb", "s-ahb";
@@ -454,7 +454,7 @@ qupv3_id_1: geniqup@9c0000 {
ranges;
status = "disabled";
- uart2: serial@98c000 {
+ uart3: serial@98c000 {
compatible = "qcom,geni-debug-uart";
reg = <0 0x0098c000 0 0x4000>;
clock-names = "se";
Use the correct names for these. Fixes: 0684074a46e8 ("arm64: dts: qcom: Add basic devicetree support for SM8350-MTP board") Fxies: 9208c19f2124 ("arm64: dts: qcom: Introduce SM8350 HDK") Signed-off-by: Jonathan Marek <jonathan@marek.ca> --- arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 6 +++--- arch/arm64/boot/dts/qcom/sm8350-mtp.dts | 6 +++--- arch/arm64/boot/dts/qcom/sm8350.dtsi | 4 ++-- 3 files changed, 8 insertions(+), 8 deletions(-)