@@ -85,6 +85,58 @@ usb_id: usb-id {
};
};
+&blsp_i2c2 {
+ status = "okay";
+
+ magnetometer@c {
+ compatible = "asahi-kasei,ak09911";
+ reg = <0x0c>;
+
+ vdd-supply = <&pm8916_l17>;
+ vid-supply = <&pm8916_l6>;
+
+ reset-gpios = <&msmgpio 36 GPIO_ACTIVE_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mag_reset_default>;
+ };
+
+ accelerometer@1e {
+ compatible = "kionix,kx023-1025";
+ reg = <0x1e>;
+
+ interrupt-parent = <&msmgpio>;
+ interrupts = <115 IRQ_TYPE_EDGE_RISING>;
+
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l6>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&accel_irq_default>;
+
+ mount-matrix = "-1", "0", "0",
+ "0", "1", "0",
+ "0", "0", "1";
+ };
+
+ proximity@39 {
+ compatible = "avago,apds9930";
+ reg = <0x39>;
+
+ interrupt-parent = <&msmgpio>;
+ interrupts = <113 IRQ_TYPE_EDGE_FALLING>;
+
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l6>;
+
+ led-max-microamp = <100000>;
+ amstaos,proximity-diodes = <1>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&prox_irq_default>;
+ };
+};
+
&blsp_i2c5 {
status = "okay";
@@ -278,6 +330,14 @@ l18 {
};
&msmgpio {
+ accel_irq_default: accel-irq-default {
+ pins = "gpio115";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
gpio_keys_default: gpio-keys-default {
pins = "gpio107";
function = "gpio";
@@ -294,6 +354,22 @@ gpio_leds_default: gpio-leds-default {
bias-disable;
};
+ mag_reset_default: mag-reset-default {
+ pins = "gpio36";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ prox_irq_default: prox-irq-default {
+ pins = "gpio113";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
sdhc2_cd_default: sdhc2-cd-default {
pins = "gpio56";
function = "gpio";
The Huawei Ascend G7 has 3 sensors, all supported by existing kernel drivers: 1. Kionix KX023-1025 accelerometer (kxcjk-1023) 2. Asahi Kasei AK09911 magnetometer (ak8975) 3. Avago APDS9930 proximity/light sensor (tsl2772) Add them to the huawei-g7 device tree. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> --- .../arm64/boot/dts/qcom/msm8916-huawei-g7.dts | 76 +++++++++++++++++++ 1 file changed, 76 insertions(+)