| Message ID | 20210513165327.1.I4d214bb82746fb2ed94eb1c2100dda0f63cf9a25@changeid |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Bluetooth: hci_h5: Add RTL8822CS capabilities | expand |
Hi Marcel, On Fri, 14 May 2021 at 03:03, Marcel Holtmann <marcel@holtmann.org> wrote: > > Hi Archie, > > >>> RTL8822 chipset supports WBS, and this information is conveyed in > >>> btusb.c. However, the UART driver doesn't have this information just > >>> yet. > >>> > >>> Signed-off-by: Archie Pusaka <apusaka@chromium.org> > >>> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> > >>> --- > >>> > >>> drivers/bluetooth/btrtl.c | 26 ++++++++++++++++---------- > >>> drivers/bluetooth/btrtl.h | 2 ++ > >>> drivers/bluetooth/hci_h5.c | 5 +---- > >>> 3 files changed, 19 insertions(+), 14 deletions(-) > >>> > >>> diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c > >>> index e7fe5fb22753..988a09860c6b 100644 > >>> --- a/drivers/bluetooth/btrtl.c > >>> +++ b/drivers/bluetooth/btrtl.c > >>> @@ -719,17 +719,8 @@ int btrtl_download_firmware(struct hci_dev *hdev, > >>> } > >>> EXPORT_SYMBOL_GPL(btrtl_download_firmware); > >>> > >>> -int btrtl_setup_realtek(struct hci_dev *hdev) > >>> +void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev) > >>> { > >>> - struct btrtl_device_info *btrtl_dev; > >>> - int ret; > >>> - > >>> - btrtl_dev = btrtl_initialize(hdev, NULL); > >>> - if (IS_ERR(btrtl_dev)) > >>> - return PTR_ERR(btrtl_dev); > >>> - > >>> - ret = btrtl_download_firmware(hdev, btrtl_dev); > >>> - > >>> /* Enable controller to do both LE scan and BR/EDR inquiry > >>> * simultaneously. > >>> */ > >>> @@ -750,6 +741,21 @@ int btrtl_setup_realtek(struct hci_dev *hdev) > >>> rtl_dev_dbg(hdev, "WBS supported not enabled."); > >>> break; > >>> } > >>> +} > >>> +EXPORT_SYMBOL_GPL(btrtl_set_quirks); > >>> + > >>> +int btrtl_setup_realtek(struct hci_dev *hdev) > >>> +{ > >>> + struct btrtl_device_info *btrtl_dev; > >>> + int ret; > >>> + > >>> + btrtl_dev = btrtl_initialize(hdev, NULL); > >>> + if (IS_ERR(btrtl_dev)) > >>> + return PTR_ERR(btrtl_dev); > >>> + > >>> + ret = btrtl_download_firmware(hdev, btrtl_dev); > >>> + > >>> + btrtl_set_quirks(hdev, btrtl_dev); > >>> > >>> btrtl_free(btrtl_dev); > >>> return ret; > >>> diff --git a/drivers/bluetooth/btrtl.h b/drivers/bluetooth/btrtl.h > >>> index 2a582682136d..260167f01b08 100644 > >>> --- a/drivers/bluetooth/btrtl.h > >>> +++ b/drivers/bluetooth/btrtl.h > >>> @@ -54,6 +54,8 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev, > >>> void btrtl_free(struct btrtl_device_info *btrtl_dev); > >>> int btrtl_download_firmware(struct hci_dev *hdev, > >>> struct btrtl_device_info *btrtl_dev); > >>> +void btrtl_set_quirks(struct hci_dev *hdev, > >>> + struct btrtl_device_info *btrtl_dev); > >>> int btrtl_setup_realtek(struct hci_dev *hdev); > >>> int btrtl_shutdown_realtek(struct hci_dev *hdev); > >>> int btrtl_get_uart_settings(struct hci_dev *hdev, > >>> diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c > >>> index 27e96681d583..e0520639f4ba 100644 > >>> --- a/drivers/bluetooth/hci_h5.c > >>> +++ b/drivers/bluetooth/hci_h5.c > >>> @@ -906,10 +906,7 @@ static int h5_btrtl_setup(struct h5 *h5) > >>> /* Give the device some time before the hci-core sends it a reset */ > >>> usleep_range(10000, 20000); > >>> > >>> - /* Enable controller to do both LE scan and BR/EDR inquiry > >>> - * simultaneously. > >>> - */ > >>> - set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &h5->hu->hdev->quirks); > >>> + btrtl_set_quirks(h5->hu->hdev, btrtl_dev); > >> > >> any reason why not just setting WBS quirk here? > > > > Hmm, I think WBS is the feature of the chipset and not the transport. > > Therefore isn't it better to just have it set in one place? > > Setting the quirks here means we need to copy paste the settings from btrtl.c. > > but since you are already setting HCI_QUIRK_SIMULTANEOUS_DISCOVERY right now, I don’t see the difference. Sorry, I don't get what you mean. With this patch I also moved HCI_QUIRK_SIMULTANEOUS_DISCOVERY into btrtl.c, so it's together with the WBS quirk. > Can we actually verify that we still need the WBS quirk. I think we fixed the broken errerrnous packet flag handling. To be honest, I am not aware about the story of the broken erroneous packet flag. Last time I checked I still needed the quirk to have RTL8822 on UART properly run WBS, but that was months ago... Let me verify whether this quirk is still needed. Cheers, Archie
Hi Marcel, On Fri, 14 May 2021 at 19:40, Archie Pusaka <apusaka@google.com> wrote: > > Hi Marcel, > > On Fri, 14 May 2021 at 03:03, Marcel Holtmann <marcel@holtmann.org> wrote: > > > > Hi Archie, > > > > >>> RTL8822 chipset supports WBS, and this information is conveyed in > > >>> btusb.c. However, the UART driver doesn't have this information just > > >>> yet. > > >>> > > >>> Signed-off-by: Archie Pusaka <apusaka@chromium.org> > > >>> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> > > >>> --- > > >>> > > >>> drivers/bluetooth/btrtl.c | 26 ++++++++++++++++---------- > > >>> drivers/bluetooth/btrtl.h | 2 ++ > > >>> drivers/bluetooth/hci_h5.c | 5 +---- > > >>> 3 files changed, 19 insertions(+), 14 deletions(-) > > >>> > > >>> diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c > > >>> index e7fe5fb22753..988a09860c6b 100644 > > >>> --- a/drivers/bluetooth/btrtl.c > > >>> +++ b/drivers/bluetooth/btrtl.c > > >>> @@ -719,17 +719,8 @@ int btrtl_download_firmware(struct hci_dev *hdev, > > >>> } > > >>> EXPORT_SYMBOL_GPL(btrtl_download_firmware); > > >>> > > >>> -int btrtl_setup_realtek(struct hci_dev *hdev) > > >>> +void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev) > > >>> { > > >>> - struct btrtl_device_info *btrtl_dev; > > >>> - int ret; > > >>> - > > >>> - btrtl_dev = btrtl_initialize(hdev, NULL); > > >>> - if (IS_ERR(btrtl_dev)) > > >>> - return PTR_ERR(btrtl_dev); > > >>> - > > >>> - ret = btrtl_download_firmware(hdev, btrtl_dev); > > >>> - > > >>> /* Enable controller to do both LE scan and BR/EDR inquiry > > >>> * simultaneously. > > >>> */ > > >>> @@ -750,6 +741,21 @@ int btrtl_setup_realtek(struct hci_dev *hdev) > > >>> rtl_dev_dbg(hdev, "WBS supported not enabled."); > > >>> break; > > >>> } > > >>> +} > > >>> +EXPORT_SYMBOL_GPL(btrtl_set_quirks); > > >>> + > > >>> +int btrtl_setup_realtek(struct hci_dev *hdev) > > >>> +{ > > >>> + struct btrtl_device_info *btrtl_dev; > > >>> + int ret; > > >>> + > > >>> + btrtl_dev = btrtl_initialize(hdev, NULL); > > >>> + if (IS_ERR(btrtl_dev)) > > >>> + return PTR_ERR(btrtl_dev); > > >>> + > > >>> + ret = btrtl_download_firmware(hdev, btrtl_dev); > > >>> + > > >>> + btrtl_set_quirks(hdev, btrtl_dev); > > >>> > > >>> btrtl_free(btrtl_dev); > > >>> return ret; > > >>> diff --git a/drivers/bluetooth/btrtl.h b/drivers/bluetooth/btrtl.h > > >>> index 2a582682136d..260167f01b08 100644 > > >>> --- a/drivers/bluetooth/btrtl.h > > >>> +++ b/drivers/bluetooth/btrtl.h > > >>> @@ -54,6 +54,8 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev, > > >>> void btrtl_free(struct btrtl_device_info *btrtl_dev); > > >>> int btrtl_download_firmware(struct hci_dev *hdev, > > >>> struct btrtl_device_info *btrtl_dev); > > >>> +void btrtl_set_quirks(struct hci_dev *hdev, > > >>> + struct btrtl_device_info *btrtl_dev); > > >>> int btrtl_setup_realtek(struct hci_dev *hdev); > > >>> int btrtl_shutdown_realtek(struct hci_dev *hdev); > > >>> int btrtl_get_uart_settings(struct hci_dev *hdev, > > >>> diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c > > >>> index 27e96681d583..e0520639f4ba 100644 > > >>> --- a/drivers/bluetooth/hci_h5.c > > >>> +++ b/drivers/bluetooth/hci_h5.c > > >>> @@ -906,10 +906,7 @@ static int h5_btrtl_setup(struct h5 *h5) > > >>> /* Give the device some time before the hci-core sends it a reset */ > > >>> usleep_range(10000, 20000); > > >>> > > >>> - /* Enable controller to do both LE scan and BR/EDR inquiry > > >>> - * simultaneously. > > >>> - */ > > >>> - set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &h5->hu->hdev->quirks); > > >>> + btrtl_set_quirks(h5->hu->hdev, btrtl_dev); > > >> > > >> any reason why not just setting WBS quirk here? > > > > > > Hmm, I think WBS is the feature of the chipset and not the transport. > > > Therefore isn't it better to just have it set in one place? > > > Setting the quirks here means we need to copy paste the settings from btrtl.c. > > > > but since you are already setting HCI_QUIRK_SIMULTANEOUS_DISCOVERY right now, I don’t see the difference. > > Sorry, I don't get what you mean. > With this patch I also moved HCI_QUIRK_SIMULTANEOUS_DISCOVERY into > btrtl.c, so it's together with the WBS quirk. > > > Can we actually verify that we still need the WBS quirk. I think we fixed the broken errerrnous packet flag handling. > > To be honest, I am not aware about the story of the broken erroneous > packet flag. > Last time I checked I still needed the quirk to have RTL8822 on UART > properly run WBS, but that was months ago... > Let me verify whether this quirk is still needed. It looks like we still need the WBS quirk because otherwise the host wouldn't know whether the controller supports WBS or not. It's used in get_supported_settings() in mgmt.c. > Cheers, > Archie
Hi Marcel, Friendly ping to review this patch again. Thanks! On Mon, 17 May 2021 at 12:31, Archie Pusaka <apusaka@google.com> wrote: > > Hi Marcel, > > On Fri, 14 May 2021 at 19:40, Archie Pusaka <apusaka@google.com> wrote: > > > > Hi Marcel, > > > > On Fri, 14 May 2021 at 03:03, Marcel Holtmann <marcel@holtmann.org> wrote: > > > > > > Hi Archie, > > > > > > >>> RTL8822 chipset supports WBS, and this information is conveyed in > > > >>> btusb.c. However, the UART driver doesn't have this information just > > > >>> yet. > > > >>> > > > >>> Signed-off-by: Archie Pusaka <apusaka@chromium.org> > > > >>> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> > > > >>> --- > > > >>> > > > >>> drivers/bluetooth/btrtl.c | 26 ++++++++++++++++---------- > > > >>> drivers/bluetooth/btrtl.h | 2 ++ > > > >>> drivers/bluetooth/hci_h5.c | 5 +---- > > > >>> 3 files changed, 19 insertions(+), 14 deletions(-) > > > >>> > > > >>> diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c > > > >>> index e7fe5fb22753..988a09860c6b 100644 > > > >>> --- a/drivers/bluetooth/btrtl.c > > > >>> +++ b/drivers/bluetooth/btrtl.c > > > >>> @@ -719,17 +719,8 @@ int btrtl_download_firmware(struct hci_dev *hdev, > > > >>> } > > > >>> EXPORT_SYMBOL_GPL(btrtl_download_firmware); > > > >>> > > > >>> -int btrtl_setup_realtek(struct hci_dev *hdev) > > > >>> +void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev) > > > >>> { > > > >>> - struct btrtl_device_info *btrtl_dev; > > > >>> - int ret; > > > >>> - > > > >>> - btrtl_dev = btrtl_initialize(hdev, NULL); > > > >>> - if (IS_ERR(btrtl_dev)) > > > >>> - return PTR_ERR(btrtl_dev); > > > >>> - > > > >>> - ret = btrtl_download_firmware(hdev, btrtl_dev); > > > >>> - > > > >>> /* Enable controller to do both LE scan and BR/EDR inquiry > > > >>> * simultaneously. > > > >>> */ > > > >>> @@ -750,6 +741,21 @@ int btrtl_setup_realtek(struct hci_dev *hdev) > > > >>> rtl_dev_dbg(hdev, "WBS supported not enabled."); > > > >>> break; > > > >>> } > > > >>> +} > > > >>> +EXPORT_SYMBOL_GPL(btrtl_set_quirks); > > > >>> + > > > >>> +int btrtl_setup_realtek(struct hci_dev *hdev) > > > >>> +{ > > > >>> + struct btrtl_device_info *btrtl_dev; > > > >>> + int ret; > > > >>> + > > > >>> + btrtl_dev = btrtl_initialize(hdev, NULL); > > > >>> + if (IS_ERR(btrtl_dev)) > > > >>> + return PTR_ERR(btrtl_dev); > > > >>> + > > > >>> + ret = btrtl_download_firmware(hdev, btrtl_dev); > > > >>> + > > > >>> + btrtl_set_quirks(hdev, btrtl_dev); > > > >>> > > > >>> btrtl_free(btrtl_dev); > > > >>> return ret; > > > >>> diff --git a/drivers/bluetooth/btrtl.h b/drivers/bluetooth/btrtl.h > > > >>> index 2a582682136d..260167f01b08 100644 > > > >>> --- a/drivers/bluetooth/btrtl.h > > > >>> +++ b/drivers/bluetooth/btrtl.h > > > >>> @@ -54,6 +54,8 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev, > > > >>> void btrtl_free(struct btrtl_device_info *btrtl_dev); > > > >>> int btrtl_download_firmware(struct hci_dev *hdev, > > > >>> struct btrtl_device_info *btrtl_dev); > > > >>> +void btrtl_set_quirks(struct hci_dev *hdev, > > > >>> + struct btrtl_device_info *btrtl_dev); > > > >>> int btrtl_setup_realtek(struct hci_dev *hdev); > > > >>> int btrtl_shutdown_realtek(struct hci_dev *hdev); > > > >>> int btrtl_get_uart_settings(struct hci_dev *hdev, > > > >>> diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c > > > >>> index 27e96681d583..e0520639f4ba 100644 > > > >>> --- a/drivers/bluetooth/hci_h5.c > > > >>> +++ b/drivers/bluetooth/hci_h5.c > > > >>> @@ -906,10 +906,7 @@ static int h5_btrtl_setup(struct h5 *h5) > > > >>> /* Give the device some time before the hci-core sends it a reset */ > > > >>> usleep_range(10000, 20000); > > > >>> > > > >>> - /* Enable controller to do both LE scan and BR/EDR inquiry > > > >>> - * simultaneously. > > > >>> - */ > > > >>> - set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &h5->hu->hdev->quirks); > > > >>> + btrtl_set_quirks(h5->hu->hdev, btrtl_dev); > > > >> > > > >> any reason why not just setting WBS quirk here? > > > > > > > > Hmm, I think WBS is the feature of the chipset and not the transport. > > > > Therefore isn't it better to just have it set in one place? > > > > Setting the quirks here means we need to copy paste the settings from btrtl.c. > > > > > > but since you are already setting HCI_QUIRK_SIMULTANEOUS_DISCOVERY right now, I don’t see the difference. > > > > Sorry, I don't get what you mean. > > With this patch I also moved HCI_QUIRK_SIMULTANEOUS_DISCOVERY into > > btrtl.c, so it's together with the WBS quirk. > > > > > Can we actually verify that we still need the WBS quirk. I think we fixed the broken errerrnous packet flag handling. > > > > To be honest, I am not aware about the story of the broken erroneous > > packet flag. > > Last time I checked I still needed the quirk to have RTL8822 on UART > > properly run WBS, but that was months ago... > > Let me verify whether this quirk is still needed. > > It looks like we still need the WBS quirk because otherwise the host > wouldn't know whether the controller supports WBS or not. It's used in > get_supported_settings() in mgmt.c. > > > Cheers, > > Archie
Hi Archie, >>>>>> RTL8822 chipset supports WBS, and this information is conveyed in >>>>>> btusb.c. However, the UART driver doesn't have this information just >>>>>> yet. >>>>>> >>>>>> Signed-off-by: Archie Pusaka <apusaka@chromium.org> >>>>>> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> >>>>>> --- >>>>>> >>>>>> drivers/bluetooth/btrtl.c | 26 ++++++++++++++++---------- >>>>>> drivers/bluetooth/btrtl.h | 2 ++ >>>>>> drivers/bluetooth/hci_h5.c | 5 +---- >>>>>> 3 files changed, 19 insertions(+), 14 deletions(-) >>>>>> >>>>>> diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c >>>>>> index e7fe5fb22753..988a09860c6b 100644 >>>>>> --- a/drivers/bluetooth/btrtl.c >>>>>> +++ b/drivers/bluetooth/btrtl.c >>>>>> @@ -719,17 +719,8 @@ int btrtl_download_firmware(struct hci_dev *hdev, >>>>>> } >>>>>> EXPORT_SYMBOL_GPL(btrtl_download_firmware); >>>>>> >>>>>> -int btrtl_setup_realtek(struct hci_dev *hdev) >>>>>> +void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev) >>>>>> { >>>>>> - struct btrtl_device_info *btrtl_dev; >>>>>> - int ret; >>>>>> - >>>>>> - btrtl_dev = btrtl_initialize(hdev, NULL); >>>>>> - if (IS_ERR(btrtl_dev)) >>>>>> - return PTR_ERR(btrtl_dev); >>>>>> - >>>>>> - ret = btrtl_download_firmware(hdev, btrtl_dev); >>>>>> - >>>>>> /* Enable controller to do both LE scan and BR/EDR inquiry >>>>>> * simultaneously. >>>>>> */ >>>>>> @@ -750,6 +741,21 @@ int btrtl_setup_realtek(struct hci_dev *hdev) >>>>>> rtl_dev_dbg(hdev, "WBS supported not enabled."); >>>>>> break; >>>>>> } >>>>>> +} >>>>>> +EXPORT_SYMBOL_GPL(btrtl_set_quirks); >>>>>> + >>>>>> +int btrtl_setup_realtek(struct hci_dev *hdev) >>>>>> +{ >>>>>> + struct btrtl_device_info *btrtl_dev; >>>>>> + int ret; >>>>>> + >>>>>> + btrtl_dev = btrtl_initialize(hdev, NULL); >>>>>> + if (IS_ERR(btrtl_dev)) >>>>>> + return PTR_ERR(btrtl_dev); >>>>>> + >>>>>> + ret = btrtl_download_firmware(hdev, btrtl_dev); >>>>>> + >>>>>> + btrtl_set_quirks(hdev, btrtl_dev); >>>>>> >>>>>> btrtl_free(btrtl_dev); >>>>>> return ret; >>>>>> diff --git a/drivers/bluetooth/btrtl.h b/drivers/bluetooth/btrtl.h >>>>>> index 2a582682136d..260167f01b08 100644 >>>>>> --- a/drivers/bluetooth/btrtl.h >>>>>> +++ b/drivers/bluetooth/btrtl.h >>>>>> @@ -54,6 +54,8 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev, >>>>>> void btrtl_free(struct btrtl_device_info *btrtl_dev); >>>>>> int btrtl_download_firmware(struct hci_dev *hdev, >>>>>> struct btrtl_device_info *btrtl_dev); >>>>>> +void btrtl_set_quirks(struct hci_dev *hdev, >>>>>> + struct btrtl_device_info *btrtl_dev); >>>>>> int btrtl_setup_realtek(struct hci_dev *hdev); >>>>>> int btrtl_shutdown_realtek(struct hci_dev *hdev); >>>>>> int btrtl_get_uart_settings(struct hci_dev *hdev, >>>>>> diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c >>>>>> index 27e96681d583..e0520639f4ba 100644 >>>>>> --- a/drivers/bluetooth/hci_h5.c >>>>>> +++ b/drivers/bluetooth/hci_h5.c >>>>>> @@ -906,10 +906,7 @@ static int h5_btrtl_setup(struct h5 *h5) >>>>>> /* Give the device some time before the hci-core sends it a reset */ >>>>>> usleep_range(10000, 20000); >>>>>> >>>>>> - /* Enable controller to do both LE scan and BR/EDR inquiry >>>>>> - * simultaneously. >>>>>> - */ >>>>>> - set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &h5->hu->hdev->quirks); >>>>>> + btrtl_set_quirks(h5->hu->hdev, btrtl_dev); >>>>> >>>>> any reason why not just setting WBS quirk here? >>>> >>>> Hmm, I think WBS is the feature of the chipset and not the transport. >>>> Therefore isn't it better to just have it set in one place? >>>> Setting the quirks here means we need to copy paste the settings from btrtl.c. >>> >>> but since you are already setting HCI_QUIRK_SIMULTANEOUS_DISCOVERY right now, I don’t see the difference. >> >> Sorry, I don't get what you mean. >> With this patch I also moved HCI_QUIRK_SIMULTANEOUS_DISCOVERY into >> btrtl.c, so it's together with the WBS quirk. >> >>> Can we actually verify that we still need the WBS quirk. I think we fixed the broken errerrnous packet flag handling. >> >> To be honest, I am not aware about the story of the broken erroneous >> packet flag. >> Last time I checked I still needed the quirk to have RTL8822 on UART >> properly run WBS, but that was months ago... >> Let me verify whether this quirk is still needed. > > It looks like we still need the WBS quirk because otherwise the host > wouldn't know whether the controller supports WBS or not. It's used in > get_supported_settings() in mgmt.c. and why not set it unconditionally for all Realtek chips? Regards Marcel
Hi Marcel, On Thu, 20 May 2021 at 23:18, Marcel Holtmann <marcel@holtmann.org> wrote: > > Hi Archie, > > >>>>>> RTL8822 chipset supports WBS, and this information is conveyed in > >>>>>> btusb.c. However, the UART driver doesn't have this information just > >>>>>> yet. > >>>>>> > >>>>>> Signed-off-by: Archie Pusaka <apusaka@chromium.org> > >>>>>> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> > >>>>>> --- > >>>>>> > >>>>>> drivers/bluetooth/btrtl.c | 26 ++++++++++++++++---------- > >>>>>> drivers/bluetooth/btrtl.h | 2 ++ > >>>>>> drivers/bluetooth/hci_h5.c | 5 +---- > >>>>>> 3 files changed, 19 insertions(+), 14 deletions(-) > >>>>>> > >>>>>> diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c > >>>>>> index e7fe5fb22753..988a09860c6b 100644 > >>>>>> --- a/drivers/bluetooth/btrtl.c > >>>>>> +++ b/drivers/bluetooth/btrtl.c > >>>>>> @@ -719,17 +719,8 @@ int btrtl_download_firmware(struct hci_dev *hdev, > >>>>>> } > >>>>>> EXPORT_SYMBOL_GPL(btrtl_download_firmware); > >>>>>> > >>>>>> -int btrtl_setup_realtek(struct hci_dev *hdev) > >>>>>> +void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev) > >>>>>> { > >>>>>> - struct btrtl_device_info *btrtl_dev; > >>>>>> - int ret; > >>>>>> - > >>>>>> - btrtl_dev = btrtl_initialize(hdev, NULL); > >>>>>> - if (IS_ERR(btrtl_dev)) > >>>>>> - return PTR_ERR(btrtl_dev); > >>>>>> - > >>>>>> - ret = btrtl_download_firmware(hdev, btrtl_dev); > >>>>>> - > >>>>>> /* Enable controller to do both LE scan and BR/EDR inquiry > >>>>>> * simultaneously. > >>>>>> */ > >>>>>> @@ -750,6 +741,21 @@ int btrtl_setup_realtek(struct hci_dev *hdev) > >>>>>> rtl_dev_dbg(hdev, "WBS supported not enabled."); > >>>>>> break; > >>>>>> } > >>>>>> +} > >>>>>> +EXPORT_SYMBOL_GPL(btrtl_set_quirks); > >>>>>> + > >>>>>> +int btrtl_setup_realtek(struct hci_dev *hdev) > >>>>>> +{ > >>>>>> + struct btrtl_device_info *btrtl_dev; > >>>>>> + int ret; > >>>>>> + > >>>>>> + btrtl_dev = btrtl_initialize(hdev, NULL); > >>>>>> + if (IS_ERR(btrtl_dev)) > >>>>>> + return PTR_ERR(btrtl_dev); > >>>>>> + > >>>>>> + ret = btrtl_download_firmware(hdev, btrtl_dev); > >>>>>> + > >>>>>> + btrtl_set_quirks(hdev, btrtl_dev); > >>>>>> > >>>>>> btrtl_free(btrtl_dev); > >>>>>> return ret; > >>>>>> diff --git a/drivers/bluetooth/btrtl.h b/drivers/bluetooth/btrtl.h > >>>>>> index 2a582682136d..260167f01b08 100644 > >>>>>> --- a/drivers/bluetooth/btrtl.h > >>>>>> +++ b/drivers/bluetooth/btrtl.h > >>>>>> @@ -54,6 +54,8 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev, > >>>>>> void btrtl_free(struct btrtl_device_info *btrtl_dev); > >>>>>> int btrtl_download_firmware(struct hci_dev *hdev, > >>>>>> struct btrtl_device_info *btrtl_dev); > >>>>>> +void btrtl_set_quirks(struct hci_dev *hdev, > >>>>>> + struct btrtl_device_info *btrtl_dev); > >>>>>> int btrtl_setup_realtek(struct hci_dev *hdev); > >>>>>> int btrtl_shutdown_realtek(struct hci_dev *hdev); > >>>>>> int btrtl_get_uart_settings(struct hci_dev *hdev, > >>>>>> diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c > >>>>>> index 27e96681d583..e0520639f4ba 100644 > >>>>>> --- a/drivers/bluetooth/hci_h5.c > >>>>>> +++ b/drivers/bluetooth/hci_h5.c > >>>>>> @@ -906,10 +906,7 @@ static int h5_btrtl_setup(struct h5 *h5) > >>>>>> /* Give the device some time before the hci-core sends it a reset */ > >>>>>> usleep_range(10000, 20000); > >>>>>> > >>>>>> - /* Enable controller to do both LE scan and BR/EDR inquiry > >>>>>> - * simultaneously. > >>>>>> - */ > >>>>>> - set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &h5->hu->hdev->quirks); > >>>>>> + btrtl_set_quirks(h5->hu->hdev, btrtl_dev); > >>>>> > >>>>> any reason why not just setting WBS quirk here? > >>>> > >>>> Hmm, I think WBS is the feature of the chipset and not the transport. > >>>> Therefore isn't it better to just have it set in one place? > >>>> Setting the quirks here means we need to copy paste the settings from btrtl.c. > >>> > >>> but since you are already setting HCI_QUIRK_SIMULTANEOUS_DISCOVERY right now, I don’t see the difference. > >> > >> Sorry, I don't get what you mean. > >> With this patch I also moved HCI_QUIRK_SIMULTANEOUS_DISCOVERY into > >> btrtl.c, so it's together with the WBS quirk. > >> > >>> Can we actually verify that we still need the WBS quirk. I think we fixed the broken errerrnous packet flag handling. > >> > >> To be honest, I am not aware about the story of the broken erroneous > >> packet flag. > >> Last time I checked I still needed the quirk to have RTL8822 on UART > >> properly run WBS, but that was months ago... > >> Let me verify whether this quirk is still needed. > > > > It looks like we still need the WBS quirk because otherwise the host > > wouldn't know whether the controller supports WBS or not. It's used in > > get_supported_settings() in mgmt.c. > > and why not set it unconditionally for all Realtek chips? Not all Realtek chips supports WBS, therefore HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED is only set on some of them. Thanks Archie
Hi Marcel, On Fri, 21 May 2021 at 00:02, Archie Pusaka <apusaka@google.com> wrote: > > Hi Marcel, > > On Thu, 20 May 2021 at 23:18, Marcel Holtmann <marcel@holtmann.org> wrote: > > > > Hi Archie, > > > > >>>>>> RTL8822 chipset supports WBS, and this information is conveyed in > > >>>>>> btusb.c. However, the UART driver doesn't have this information just > > >>>>>> yet. > > >>>>>> > > >>>>>> Signed-off-by: Archie Pusaka <apusaka@chromium.org> > > >>>>>> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> > > >>>>>> --- > > >>>>>> > > >>>>>> drivers/bluetooth/btrtl.c | 26 ++++++++++++++++---------- > > >>>>>> drivers/bluetooth/btrtl.h | 2 ++ > > >>>>>> drivers/bluetooth/hci_h5.c | 5 +---- > > >>>>>> 3 files changed, 19 insertions(+), 14 deletions(-) > > >>>>>> > > >>>>>> diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c > > >>>>>> index e7fe5fb22753..988a09860c6b 100644 > > >>>>>> --- a/drivers/bluetooth/btrtl.c > > >>>>>> +++ b/drivers/bluetooth/btrtl.c > > >>>>>> @@ -719,17 +719,8 @@ int btrtl_download_firmware(struct hci_dev *hdev, > > >>>>>> } > > >>>>>> EXPORT_SYMBOL_GPL(btrtl_download_firmware); > > >>>>>> > > >>>>>> -int btrtl_setup_realtek(struct hci_dev *hdev) > > >>>>>> +void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev) > > >>>>>> { > > >>>>>> - struct btrtl_device_info *btrtl_dev; > > >>>>>> - int ret; > > >>>>>> - > > >>>>>> - btrtl_dev = btrtl_initialize(hdev, NULL); > > >>>>>> - if (IS_ERR(btrtl_dev)) > > >>>>>> - return PTR_ERR(btrtl_dev); > > >>>>>> - > > >>>>>> - ret = btrtl_download_firmware(hdev, btrtl_dev); > > >>>>>> - > > >>>>>> /* Enable controller to do both LE scan and BR/EDR inquiry > > >>>>>> * simultaneously. > > >>>>>> */ > > >>>>>> @@ -750,6 +741,21 @@ int btrtl_setup_realtek(struct hci_dev *hdev) > > >>>>>> rtl_dev_dbg(hdev, "WBS supported not enabled."); > > >>>>>> break; > > >>>>>> } > > >>>>>> +} > > >>>>>> +EXPORT_SYMBOL_GPL(btrtl_set_quirks); > > >>>>>> + > > >>>>>> +int btrtl_setup_realtek(struct hci_dev *hdev) > > >>>>>> +{ > > >>>>>> + struct btrtl_device_info *btrtl_dev; > > >>>>>> + int ret; > > >>>>>> + > > >>>>>> + btrtl_dev = btrtl_initialize(hdev, NULL); > > >>>>>> + if (IS_ERR(btrtl_dev)) > > >>>>>> + return PTR_ERR(btrtl_dev); > > >>>>>> + > > >>>>>> + ret = btrtl_download_firmware(hdev, btrtl_dev); > > >>>>>> + > > >>>>>> + btrtl_set_quirks(hdev, btrtl_dev); > > >>>>>> > > >>>>>> btrtl_free(btrtl_dev); > > >>>>>> return ret; > > >>>>>> diff --git a/drivers/bluetooth/btrtl.h b/drivers/bluetooth/btrtl.h > > >>>>>> index 2a582682136d..260167f01b08 100644 > > >>>>>> --- a/drivers/bluetooth/btrtl.h > > >>>>>> +++ b/drivers/bluetooth/btrtl.h > > >>>>>> @@ -54,6 +54,8 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev, > > >>>>>> void btrtl_free(struct btrtl_device_info *btrtl_dev); > > >>>>>> int btrtl_download_firmware(struct hci_dev *hdev, > > >>>>>> struct btrtl_device_info *btrtl_dev); > > >>>>>> +void btrtl_set_quirks(struct hci_dev *hdev, > > >>>>>> + struct btrtl_device_info *btrtl_dev); > > >>>>>> int btrtl_setup_realtek(struct hci_dev *hdev); > > >>>>>> int btrtl_shutdown_realtek(struct hci_dev *hdev); > > >>>>>> int btrtl_get_uart_settings(struct hci_dev *hdev, > > >>>>>> diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c > > >>>>>> index 27e96681d583..e0520639f4ba 100644 > > >>>>>> --- a/drivers/bluetooth/hci_h5.c > > >>>>>> +++ b/drivers/bluetooth/hci_h5.c > > >>>>>> @@ -906,10 +906,7 @@ static int h5_btrtl_setup(struct h5 *h5) > > >>>>>> /* Give the device some time before the hci-core sends it a reset */ > > >>>>>> usleep_range(10000, 20000); > > >>>>>> > > >>>>>> - /* Enable controller to do both LE scan and BR/EDR inquiry > > >>>>>> - * simultaneously. > > >>>>>> - */ > > >>>>>> - set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &h5->hu->hdev->quirks); > > >>>>>> + btrtl_set_quirks(h5->hu->hdev, btrtl_dev); > > >>>>> > > >>>>> any reason why not just setting WBS quirk here? > > >>>> > > >>>> Hmm, I think WBS is the feature of the chipset and not the transport. > > >>>> Therefore isn't it better to just have it set in one place? > > >>>> Setting the quirks here means we need to copy paste the settings from btrtl.c. > > >>> > > >>> but since you are already setting HCI_QUIRK_SIMULTANEOUS_DISCOVERY right now, I don’t see the difference. > > >> > > >> Sorry, I don't get what you mean. > > >> With this patch I also moved HCI_QUIRK_SIMULTANEOUS_DISCOVERY into > > >> btrtl.c, so it's together with the WBS quirk. > > >> > > >>> Can we actually verify that we still need the WBS quirk. I think we fixed the broken errerrnous packet flag handling. > > >> > > >> To be honest, I am not aware about the story of the broken erroneous > > >> packet flag. > > >> Last time I checked I still needed the quirk to have RTL8822 on UART > > >> properly run WBS, but that was months ago... > > >> Let me verify whether this quirk is still needed. > > > > > > It looks like we still need the WBS quirk because otherwise the host > > > wouldn't know whether the controller supports WBS or not. It's used in > > > get_supported_settings() in mgmt.c. > > > > and why not set it unconditionally for all Realtek chips? > > Not all Realtek chips supports WBS, therefore > HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED is only set on some of them. Are there any other concerns you might have? Cheers, Archie
Hi Archie, >>>>>>>>> RTL8822 chipset supports WBS, and this information is conveyed in >>>>>>>>> btusb.c. However, the UART driver doesn't have this information just >>>>>>>>> yet. >>>>>>>>> >>>>>>>>> Signed-off-by: Archie Pusaka <apusaka@chromium.org> >>>>>>>>> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> >>>>>>>>> --- >>>>>>>>> >>>>>>>>> drivers/bluetooth/btrtl.c | 26 ++++++++++++++++---------- >>>>>>>>> drivers/bluetooth/btrtl.h | 2 ++ >>>>>>>>> drivers/bluetooth/hci_h5.c | 5 +---- >>>>>>>>> 3 files changed, 19 insertions(+), 14 deletions(-) >>>>>>>>> >>>>>>>>> diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c >>>>>>>>> index e7fe5fb22753..988a09860c6b 100644 >>>>>>>>> --- a/drivers/bluetooth/btrtl.c >>>>>>>>> +++ b/drivers/bluetooth/btrtl.c >>>>>>>>> @@ -719,17 +719,8 @@ int btrtl_download_firmware(struct hci_dev *hdev, >>>>>>>>> } >>>>>>>>> EXPORT_SYMBOL_GPL(btrtl_download_firmware); >>>>>>>>> >>>>>>>>> -int btrtl_setup_realtek(struct hci_dev *hdev) >>>>>>>>> +void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev) >>>>>>>>> { >>>>>>>>> - struct btrtl_device_info *btrtl_dev; >>>>>>>>> - int ret; >>>>>>>>> - >>>>>>>>> - btrtl_dev = btrtl_initialize(hdev, NULL); >>>>>>>>> - if (IS_ERR(btrtl_dev)) >>>>>>>>> - return PTR_ERR(btrtl_dev); >>>>>>>>> - >>>>>>>>> - ret = btrtl_download_firmware(hdev, btrtl_dev); >>>>>>>>> - >>>>>>>>> /* Enable controller to do both LE scan and BR/EDR inquiry >>>>>>>>> * simultaneously. >>>>>>>>> */ >>>>>>>>> @@ -750,6 +741,21 @@ int btrtl_setup_realtek(struct hci_dev *hdev) >>>>>>>>> rtl_dev_dbg(hdev, "WBS supported not enabled."); >>>>>>>>> break; >>>>>>>>> } >>>>>>>>> +} >>>>>>>>> +EXPORT_SYMBOL_GPL(btrtl_set_quirks); >>>>>>>>> + >>>>>>>>> +int btrtl_setup_realtek(struct hci_dev *hdev) >>>>>>>>> +{ >>>>>>>>> + struct btrtl_device_info *btrtl_dev; >>>>>>>>> + int ret; >>>>>>>>> + >>>>>>>>> + btrtl_dev = btrtl_initialize(hdev, NULL); >>>>>>>>> + if (IS_ERR(btrtl_dev)) >>>>>>>>> + return PTR_ERR(btrtl_dev); >>>>>>>>> + >>>>>>>>> + ret = btrtl_download_firmware(hdev, btrtl_dev); >>>>>>>>> + >>>>>>>>> + btrtl_set_quirks(hdev, btrtl_dev); >>>>>>>>> >>>>>>>>> btrtl_free(btrtl_dev); >>>>>>>>> return ret; >>>>>>>>> diff --git a/drivers/bluetooth/btrtl.h b/drivers/bluetooth/btrtl.h >>>>>>>>> index 2a582682136d..260167f01b08 100644 >>>>>>>>> --- a/drivers/bluetooth/btrtl.h >>>>>>>>> +++ b/drivers/bluetooth/btrtl.h >>>>>>>>> @@ -54,6 +54,8 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev, >>>>>>>>> void btrtl_free(struct btrtl_device_info *btrtl_dev); >>>>>>>>> int btrtl_download_firmware(struct hci_dev *hdev, >>>>>>>>> struct btrtl_device_info *btrtl_dev); >>>>>>>>> +void btrtl_set_quirks(struct hci_dev *hdev, >>>>>>>>> + struct btrtl_device_info *btrtl_dev); >>>>>>>>> int btrtl_setup_realtek(struct hci_dev *hdev); >>>>>>>>> int btrtl_shutdown_realtek(struct hci_dev *hdev); >>>>>>>>> int btrtl_get_uart_settings(struct hci_dev *hdev, >>>>>>>>> diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c >>>>>>>>> index 27e96681d583..e0520639f4ba 100644 >>>>>>>>> --- a/drivers/bluetooth/hci_h5.c >>>>>>>>> +++ b/drivers/bluetooth/hci_h5.c >>>>>>>>> @@ -906,10 +906,7 @@ static int h5_btrtl_setup(struct h5 *h5) >>>>>>>>> /* Give the device some time before the hci-core sends it a reset */ >>>>>>>>> usleep_range(10000, 20000); >>>>>>>>> >>>>>>>>> - /* Enable controller to do both LE scan and BR/EDR inquiry >>>>>>>>> - * simultaneously. >>>>>>>>> - */ >>>>>>>>> - set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &h5->hu->hdev->quirks); >>>>>>>>> + btrtl_set_quirks(h5->hu->hdev, btrtl_dev); >>>>>>>> >>>>>>>> any reason why not just setting WBS quirk here? >>>>>>> >>>>>>> Hmm, I think WBS is the feature of the chipset and not the transport. >>>>>>> Therefore isn't it better to just have it set in one place? >>>>>>> Setting the quirks here means we need to copy paste the settings from btrtl.c. >>>>>> >>>>>> but since you are already setting HCI_QUIRK_SIMULTANEOUS_DISCOVERY right now, I don’t see the difference. >>>>> >>>>> Sorry, I don't get what you mean. >>>>> With this patch I also moved HCI_QUIRK_SIMULTANEOUS_DISCOVERY into >>>>> btrtl.c, so it's together with the WBS quirk. >>>>> >>>>>> Can we actually verify that we still need the WBS quirk. I think we fixed the broken errerrnous packet flag handling. >>>>> >>>>> To be honest, I am not aware about the story of the broken erroneous >>>>> packet flag. >>>>> Last time I checked I still needed the quirk to have RTL8822 on UART >>>>> properly run WBS, but that was months ago... >>>>> Let me verify whether this quirk is still needed. >>>> >>>> It looks like we still need the WBS quirk because otherwise the host >>>> wouldn't know whether the controller supports WBS or not. It's used in >>>> get_supported_settings() in mgmt.c. >>> >>> and why not set it unconditionally for all Realtek chips? >> >> Not all Realtek chips supports WBS, therefore >> HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED is only set on some of them. > > Are there any other concerns you might have? can we do the quirk setting in btrtl_setup_realtek() instead of creating another exported function. Regards Marcel
Hi Marcel, On Wed, 26 May 2021 at 22:59, Marcel Holtmann <marcel@holtmann.org> wrote: > > Hi Archie, > > >>>>>>>>> RTL8822 chipset supports WBS, and this information is conveyed in > >>>>>>>>> btusb.c. However, the UART driver doesn't have this information just > >>>>>>>>> yet. > >>>>>>>>> > >>>>>>>>> Signed-off-by: Archie Pusaka <apusaka@chromium.org> > >>>>>>>>> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> > >>>>>>>>> --- > >>>>>>>>> > >>>>>>>>> drivers/bluetooth/btrtl.c | 26 ++++++++++++++++---------- > >>>>>>>>> drivers/bluetooth/btrtl.h | 2 ++ > >>>>>>>>> drivers/bluetooth/hci_h5.c | 5 +---- > >>>>>>>>> 3 files changed, 19 insertions(+), 14 deletions(-) > >>>>>>>>> > >>>>>>>>> diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c > >>>>>>>>> index e7fe5fb22753..988a09860c6b 100644 > >>>>>>>>> --- a/drivers/bluetooth/btrtl.c > >>>>>>>>> +++ b/drivers/bluetooth/btrtl.c > >>>>>>>>> @@ -719,17 +719,8 @@ int btrtl_download_firmware(struct hci_dev *hdev, > >>>>>>>>> } > >>>>>>>>> EXPORT_SYMBOL_GPL(btrtl_download_firmware); > >>>>>>>>> > >>>>>>>>> -int btrtl_setup_realtek(struct hci_dev *hdev) > >>>>>>>>> +void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev) > >>>>>>>>> { > >>>>>>>>> - struct btrtl_device_info *btrtl_dev; > >>>>>>>>> - int ret; > >>>>>>>>> - > >>>>>>>>> - btrtl_dev = btrtl_initialize(hdev, NULL); > >>>>>>>>> - if (IS_ERR(btrtl_dev)) > >>>>>>>>> - return PTR_ERR(btrtl_dev); > >>>>>>>>> - > >>>>>>>>> - ret = btrtl_download_firmware(hdev, btrtl_dev); > >>>>>>>>> - > >>>>>>>>> /* Enable controller to do both LE scan and BR/EDR inquiry > >>>>>>>>> * simultaneously. > >>>>>>>>> */ > >>>>>>>>> @@ -750,6 +741,21 @@ int btrtl_setup_realtek(struct hci_dev *hdev) > >>>>>>>>> rtl_dev_dbg(hdev, "WBS supported not enabled."); > >>>>>>>>> break; > >>>>>>>>> } > >>>>>>>>> +} > >>>>>>>>> +EXPORT_SYMBOL_GPL(btrtl_set_quirks); > >>>>>>>>> + > >>>>>>>>> +int btrtl_setup_realtek(struct hci_dev *hdev) > >>>>>>>>> +{ > >>>>>>>>> + struct btrtl_device_info *btrtl_dev; > >>>>>>>>> + int ret; > >>>>>>>>> + > >>>>>>>>> + btrtl_dev = btrtl_initialize(hdev, NULL); > >>>>>>>>> + if (IS_ERR(btrtl_dev)) > >>>>>>>>> + return PTR_ERR(btrtl_dev); > >>>>>>>>> + > >>>>>>>>> + ret = btrtl_download_firmware(hdev, btrtl_dev); > >>>>>>>>> + > >>>>>>>>> + btrtl_set_quirks(hdev, btrtl_dev); > >>>>>>>>> > >>>>>>>>> btrtl_free(btrtl_dev); > >>>>>>>>> return ret; > >>>>>>>>> diff --git a/drivers/bluetooth/btrtl.h b/drivers/bluetooth/btrtl.h > >>>>>>>>> index 2a582682136d..260167f01b08 100644 > >>>>>>>>> --- a/drivers/bluetooth/btrtl.h > >>>>>>>>> +++ b/drivers/bluetooth/btrtl.h > >>>>>>>>> @@ -54,6 +54,8 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev, > >>>>>>>>> void btrtl_free(struct btrtl_device_info *btrtl_dev); > >>>>>>>>> int btrtl_download_firmware(struct hci_dev *hdev, > >>>>>>>>> struct btrtl_device_info *btrtl_dev); > >>>>>>>>> +void btrtl_set_quirks(struct hci_dev *hdev, > >>>>>>>>> + struct btrtl_device_info *btrtl_dev); > >>>>>>>>> int btrtl_setup_realtek(struct hci_dev *hdev); > >>>>>>>>> int btrtl_shutdown_realtek(struct hci_dev *hdev); > >>>>>>>>> int btrtl_get_uart_settings(struct hci_dev *hdev, > >>>>>>>>> diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c > >>>>>>>>> index 27e96681d583..e0520639f4ba 100644 > >>>>>>>>> --- a/drivers/bluetooth/hci_h5.c > >>>>>>>>> +++ b/drivers/bluetooth/hci_h5.c > >>>>>>>>> @@ -906,10 +906,7 @@ static int h5_btrtl_setup(struct h5 *h5) > >>>>>>>>> /* Give the device some time before the hci-core sends it a reset */ > >>>>>>>>> usleep_range(10000, 20000); > >>>>>>>>> > >>>>>>>>> - /* Enable controller to do both LE scan and BR/EDR inquiry > >>>>>>>>> - * simultaneously. > >>>>>>>>> - */ > >>>>>>>>> - set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &h5->hu->hdev->quirks); > >>>>>>>>> + btrtl_set_quirks(h5->hu->hdev, btrtl_dev); > >>>>>>>> > >>>>>>>> any reason why not just setting WBS quirk here? > >>>>>>> > >>>>>>> Hmm, I think WBS is the feature of the chipset and not the transport. > >>>>>>> Therefore isn't it better to just have it set in one place? > >>>>>>> Setting the quirks here means we need to copy paste the settings from btrtl.c. > >>>>>> > >>>>>> but since you are already setting HCI_QUIRK_SIMULTANEOUS_DISCOVERY right now, I don’t see the difference. > >>>>> > >>>>> Sorry, I don't get what you mean. > >>>>> With this patch I also moved HCI_QUIRK_SIMULTANEOUS_DISCOVERY into > >>>>> btrtl.c, so it's together with the WBS quirk. > >>>>> > >>>>>> Can we actually verify that we still need the WBS quirk. I think we fixed the broken errerrnous packet flag handling. > >>>>> > >>>>> To be honest, I am not aware about the story of the broken erroneous > >>>>> packet flag. > >>>>> Last time I checked I still needed the quirk to have RTL8822 on UART > >>>>> properly run WBS, but that was months ago... > >>>>> Let me verify whether this quirk is still needed. > >>>> > >>>> It looks like we still need the WBS quirk because otherwise the host > >>>> wouldn't know whether the controller supports WBS or not. It's used in > >>>> get_supported_settings() in mgmt.c. > >>> > >>> and why not set it unconditionally for all Realtek chips? > >> > >> Not all Realtek chips supports WBS, therefore > >> HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED is only set on some of them. > > > > Are there any other concerns you might have? > > can we do the quirk setting in btrtl_setup_realtek() instead of creating another exported function. It cannot be done easily since the first part of btrtl_setup_realtek() is used exclusively for btusb, which is done differently in hci_h5. We can have it another way: define btrtl_setup_realtek_h5() to do the setup for h5 part in btrtl.c. This would effectively move all of h5_btrtl_setup() inside hci_h5.c, most notably the serdev setup. In turn, we don't have to expose btrtl_set_quirks(), and we can even hide btrtl_initialize(), btrtl_free(), and btrtl_download_firmware() inside btrtl.c. I'm not sure though why would one want that? We still need to export the new btrtl_setup_realtek_h5(). BTW I just noticed I missed a declaration in btrtl.h, so I will send a v2 patch to fix it. Cheers, Archie
Hi Archie, >>>>>>>>>>> RTL8822 chipset supports WBS, and this information is conveyed in >>>>>>>>>>> btusb.c. However, the UART driver doesn't have this information just >>>>>>>>>>> yet. >>>>>>>>>>> >>>>>>>>>>> Signed-off-by: Archie Pusaka <apusaka@chromium.org> >>>>>>>>>>> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> >>>>>>>>>>> --- >>>>>>>>>>> >>>>>>>>>>> drivers/bluetooth/btrtl.c | 26 ++++++++++++++++---------- >>>>>>>>>>> drivers/bluetooth/btrtl.h | 2 ++ >>>>>>>>>>> drivers/bluetooth/hci_h5.c | 5 +---- >>>>>>>>>>> 3 files changed, 19 insertions(+), 14 deletions(-) >>>>>>>>>>> >>>>>>>>>>> diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c >>>>>>>>>>> index e7fe5fb22753..988a09860c6b 100644 >>>>>>>>>>> --- a/drivers/bluetooth/btrtl.c >>>>>>>>>>> +++ b/drivers/bluetooth/btrtl.c >>>>>>>>>>> @@ -719,17 +719,8 @@ int btrtl_download_firmware(struct hci_dev *hdev, >>>>>>>>>>> } >>>>>>>>>>> EXPORT_SYMBOL_GPL(btrtl_download_firmware); >>>>>>>>>>> >>>>>>>>>>> -int btrtl_setup_realtek(struct hci_dev *hdev) >>>>>>>>>>> +void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev) >>>>>>>>>>> { >>>>>>>>>>> - struct btrtl_device_info *btrtl_dev; >>>>>>>>>>> - int ret; >>>>>>>>>>> - >>>>>>>>>>> - btrtl_dev = btrtl_initialize(hdev, NULL); >>>>>>>>>>> - if (IS_ERR(btrtl_dev)) >>>>>>>>>>> - return PTR_ERR(btrtl_dev); >>>>>>>>>>> - >>>>>>>>>>> - ret = btrtl_download_firmware(hdev, btrtl_dev); >>>>>>>>>>> - >>>>>>>>>>> /* Enable controller to do both LE scan and BR/EDR inquiry >>>>>>>>>>> * simultaneously. >>>>>>>>>>> */ >>>>>>>>>>> @@ -750,6 +741,21 @@ int btrtl_setup_realtek(struct hci_dev *hdev) >>>>>>>>>>> rtl_dev_dbg(hdev, "WBS supported not enabled."); >>>>>>>>>>> break; >>>>>>>>>>> } >>>>>>>>>>> +} >>>>>>>>>>> +EXPORT_SYMBOL_GPL(btrtl_set_quirks); >>>>>>>>>>> + >>>>>>>>>>> +int btrtl_setup_realtek(struct hci_dev *hdev) >>>>>>>>>>> +{ >>>>>>>>>>> + struct btrtl_device_info *btrtl_dev; >>>>>>>>>>> + int ret; >>>>>>>>>>> + >>>>>>>>>>> + btrtl_dev = btrtl_initialize(hdev, NULL); >>>>>>>>>>> + if (IS_ERR(btrtl_dev)) >>>>>>>>>>> + return PTR_ERR(btrtl_dev); >>>>>>>>>>> + >>>>>>>>>>> + ret = btrtl_download_firmware(hdev, btrtl_dev); >>>>>>>>>>> + >>>>>>>>>>> + btrtl_set_quirks(hdev, btrtl_dev); >>>>>>>>>>> >>>>>>>>>>> btrtl_free(btrtl_dev); >>>>>>>>>>> return ret; >>>>>>>>>>> diff --git a/drivers/bluetooth/btrtl.h b/drivers/bluetooth/btrtl.h >>>>>>>>>>> index 2a582682136d..260167f01b08 100644 >>>>>>>>>>> --- a/drivers/bluetooth/btrtl.h >>>>>>>>>>> +++ b/drivers/bluetooth/btrtl.h >>>>>>>>>>> @@ -54,6 +54,8 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev, >>>>>>>>>>> void btrtl_free(struct btrtl_device_info *btrtl_dev); >>>>>>>>>>> int btrtl_download_firmware(struct hci_dev *hdev, >>>>>>>>>>> struct btrtl_device_info *btrtl_dev); >>>>>>>>>>> +void btrtl_set_quirks(struct hci_dev *hdev, >>>>>>>>>>> + struct btrtl_device_info *btrtl_dev); >>>>>>>>>>> int btrtl_setup_realtek(struct hci_dev *hdev); >>>>>>>>>>> int btrtl_shutdown_realtek(struct hci_dev *hdev); >>>>>>>>>>> int btrtl_get_uart_settings(struct hci_dev *hdev, >>>>>>>>>>> diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c >>>>>>>>>>> index 27e96681d583..e0520639f4ba 100644 >>>>>>>>>>> --- a/drivers/bluetooth/hci_h5.c >>>>>>>>>>> +++ b/drivers/bluetooth/hci_h5.c >>>>>>>>>>> @@ -906,10 +906,7 @@ static int h5_btrtl_setup(struct h5 *h5) >>>>>>>>>>> /* Give the device some time before the hci-core sends it a reset */ >>>>>>>>>>> usleep_range(10000, 20000); >>>>>>>>>>> >>>>>>>>>>> - /* Enable controller to do both LE scan and BR/EDR inquiry >>>>>>>>>>> - * simultaneously. >>>>>>>>>>> - */ >>>>>>>>>>> - set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &h5->hu->hdev->quirks); >>>>>>>>>>> + btrtl_set_quirks(h5->hu->hdev, btrtl_dev); >>>>>>>>>> >>>>>>>>>> any reason why not just setting WBS quirk here? >>>>>>>>> >>>>>>>>> Hmm, I think WBS is the feature of the chipset and not the transport. >>>>>>>>> Therefore isn't it better to just have it set in one place? >>>>>>>>> Setting the quirks here means we need to copy paste the settings from btrtl.c. >>>>>>>> >>>>>>>> but since you are already setting HCI_QUIRK_SIMULTANEOUS_DISCOVERY right now, I don’t see the difference. >>>>>>> >>>>>>> Sorry, I don't get what you mean. >>>>>>> With this patch I also moved HCI_QUIRK_SIMULTANEOUS_DISCOVERY into >>>>>>> btrtl.c, so it's together with the WBS quirk. >>>>>>> >>>>>>>> Can we actually verify that we still need the WBS quirk. I think we fixed the broken errerrnous packet flag handling. >>>>>>> >>>>>>> To be honest, I am not aware about the story of the broken erroneous >>>>>>> packet flag. >>>>>>> Last time I checked I still needed the quirk to have RTL8822 on UART >>>>>>> properly run WBS, but that was months ago... >>>>>>> Let me verify whether this quirk is still needed. >>>>>> >>>>>> It looks like we still need the WBS quirk because otherwise the host >>>>>> wouldn't know whether the controller supports WBS or not. It's used in >>>>>> get_supported_settings() in mgmt.c. >>>>> >>>>> and why not set it unconditionally for all Realtek chips? >>>> >>>> Not all Realtek chips supports WBS, therefore >>>> HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED is only set on some of them. >>> >>> Are there any other concerns you might have? >> >> can we do the quirk setting in btrtl_setup_realtek() instead of creating another exported function. > > It cannot be done easily since the first part of btrtl_setup_realtek() > is used exclusively for btusb, which is done differently in hci_h5. > > We can have it another way: define btrtl_setup_realtek_h5() to do the > setup for h5 part in btrtl.c. This would effectively move all of > h5_btrtl_setup() inside hci_h5.c, most notably the serdev setup. In > turn, we don't have to expose btrtl_set_quirks(), and we can even hide > btrtl_initialize(), btrtl_free(), and btrtl_download_firmware() inside > btrtl.c. > I'm not sure though why would one want that? We still need to export > the new btrtl_setup_realtek_h5(). I am a bit disappointed that nobody took up the work on bt3wire.c so that we can have a clean serdev based driver for 3-Wire / H:5 support. That would make supporting USB and UART vendor setups from the same manufacturer a lot easier. The consistent hci_h5.c hacking is not doing anybody any favor in the long run. It will get more and more complicated especially since the underlying core design is a line discipline. This is a hint with a massively large hammer. Regards Marcel
diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c index e7fe5fb22753..988a09860c6b 100644 --- a/drivers/bluetooth/btrtl.c +++ b/drivers/bluetooth/btrtl.c @@ -719,17 +719,8 @@ int btrtl_download_firmware(struct hci_dev *hdev, } EXPORT_SYMBOL_GPL(btrtl_download_firmware); -int btrtl_setup_realtek(struct hci_dev *hdev) +void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev) { - struct btrtl_device_info *btrtl_dev; - int ret; - - btrtl_dev = btrtl_initialize(hdev, NULL); - if (IS_ERR(btrtl_dev)) - return PTR_ERR(btrtl_dev); - - ret = btrtl_download_firmware(hdev, btrtl_dev); - /* Enable controller to do both LE scan and BR/EDR inquiry * simultaneously. */ @@ -750,6 +741,21 @@ int btrtl_setup_realtek(struct hci_dev *hdev) rtl_dev_dbg(hdev, "WBS supported not enabled."); break; } +} +EXPORT_SYMBOL_GPL(btrtl_set_quirks); + +int btrtl_setup_realtek(struct hci_dev *hdev) +{ + struct btrtl_device_info *btrtl_dev; + int ret; + + btrtl_dev = btrtl_initialize(hdev, NULL); + if (IS_ERR(btrtl_dev)) + return PTR_ERR(btrtl_dev); + + ret = btrtl_download_firmware(hdev, btrtl_dev); + + btrtl_set_quirks(hdev, btrtl_dev); btrtl_free(btrtl_dev); return ret; diff --git a/drivers/bluetooth/btrtl.h b/drivers/bluetooth/btrtl.h index 2a582682136d..260167f01b08 100644 --- a/drivers/bluetooth/btrtl.h +++ b/drivers/bluetooth/btrtl.h @@ -54,6 +54,8 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev, void btrtl_free(struct btrtl_device_info *btrtl_dev); int btrtl_download_firmware(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev); +void btrtl_set_quirks(struct hci_dev *hdev, + struct btrtl_device_info *btrtl_dev); int btrtl_setup_realtek(struct hci_dev *hdev); int btrtl_shutdown_realtek(struct hci_dev *hdev); int btrtl_get_uart_settings(struct hci_dev *hdev, diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c index 27e96681d583..e0520639f4ba 100644 --- a/drivers/bluetooth/hci_h5.c +++ b/drivers/bluetooth/hci_h5.c @@ -906,10 +906,7 @@ static int h5_btrtl_setup(struct h5 *h5) /* Give the device some time before the hci-core sends it a reset */ usleep_range(10000, 20000); - /* Enable controller to do both LE scan and BR/EDR inquiry - * simultaneously. - */ - set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &h5->hu->hdev->quirks); + btrtl_set_quirks(h5->hu->hdev, btrtl_dev); out_free: btrtl_free(btrtl_dev);