diff mbox series

[RFC,10/13,net-next] wan: remove sbni/granch driver

Message ID 20210515221320.1255291-11-arnd@kernel.org
State Superseded
Headers show
Series drivers/net/Space.c cleanup | expand

Commit Message

Arnd Bergmann May 15, 2021, 10:13 p.m. UTC
From: Arnd Bergmann <arnd@arndb.de>


The driver was merged in 1999 and has only ever seen treewide cleanups
since then, with no indication whatsoever that anyone has actually
had access to hardware for testing the patches.

From the information in the link below, it appears that the hardware
is for some leased line system in Russia that has since been
discontinued, and useless without any remote end to connect to.

As the driver still feels like a Linux-2.2 era artifact today, it
appears that the best way forward is to just delete it.

Link: https://www.tms.ru/%D0%90%D0%B4%D0%B0%D0%BF%D1%82%D0%B5%D1%80_%D0%B4%D0%BB%D1%8F_%D0%B2%D1%8B%D0%B4%D0%B5%D0%BB%D0%B5%D0%BD%D0%BD%D1%8B%D1%85_%D0%BB%D0%B8%D0%BD%D0%B8%D0%B9_Granch_SBNI12-10
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

---
 .../admin-guide/kernel-parameters.txt         |    2 -
 drivers/net/Space.c                           |    4 -
 drivers/net/wan/Kconfig                       |   27 -
 drivers/net/wan/Makefile                      |    1 -
 drivers/net/wan/sbni.c                        | 1638 -----------------
 drivers/net/wan/sbni.h                        |  147 --
 include/net/Space.h                           |    3 -
 7 files changed, 1822 deletions(-)
 delete mode 100644 drivers/net/wan/sbni.c
 delete mode 100644 drivers/net/wan/sbni.h

-- 
2.29.2
diff mbox series

Patch

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index cb89dbdedc46..0dc2404207a7 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -4876,8 +4876,6 @@ 
 	sa1100ir	[NET]
 			See drivers/net/irda/sa1100_ir.c.
 
-	sbni=		[NET] Granch SBNI12 leased line adapter
-
 	sched_verbose	[KNL] Enables verbose scheduler debug messages.
 
 	schedstats=	[KNL,X86] Enable or disable scheduled statistics.
diff --git a/drivers/net/Space.c b/drivers/net/Space.c
index f40f2e38682f..49e67c9fb5a4 100644
--- a/drivers/net/Space.c
+++ b/drivers/net/Space.c
@@ -247,10 +247,6 @@  static int __init net_olddevs_init(void)
 {
 	int num;
 
-#ifdef CONFIG_SBNI
-	for (num = 0; num < 8; ++num)
-		sbni_probe(num);
-#endif
 	for (num = 0; num < 8; ++num)
 		ethif_probe2(num);
 
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index f59ebafa3761..a187c814a4a6 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -313,33 +313,6 @@  config LAPBETHER
 	  To compile this driver as a module, choose M here: the
 	  module will be called lapbether.
 
-	  If unsure, say N.
-
-config SBNI
-	tristate "Granch SBNI12 Leased Line adapter support"
-	depends on X86
-	help
-	  Driver for ISA SBNI12-xx cards which are low cost alternatives to
-	  leased line modems.
-
-	  You can find more information and last versions of drivers and
-	  utilities at <http://www.granch.ru/>. If you have any question you
-	  can send email to <sbni@granch.ru>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called sbni.
-
-	  If unsure, say N.
-
-config SBNI_MULTILINE
-	bool "Multiple line feature support"
-	depends on SBNI
-	help
-	  Schedule traffic for some parallel lines, via SBNI12 adapters.
-
-	  If you have two computers connected with two parallel lines it's
-	  possible to increase transfer rate nearly twice. You should have
-	  a program named 'sbniconfig' to configure adapters.
 
 	  If unsure, say N.
 
diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile
index 081666c36ca2..f6b92efffc94 100644
--- a/drivers/net/wan/Makefile
+++ b/drivers/net/wan/Makefile
@@ -22,7 +22,6 @@  obj-$(CONFIG_FARSYNC)		+= farsync.o
 obj-$(CONFIG_LANMEDIA)		+= lmc/
 
 obj-$(CONFIG_LAPBETHER)		+= lapbether.o
-obj-$(CONFIG_SBNI)		+= sbni.o
 obj-$(CONFIG_N2)		+= n2.o
 obj-$(CONFIG_C101)		+= c101.o
 obj-$(CONFIG_WANXL)		+= wanxl.o
diff --git a/drivers/net/wan/sbni.c b/drivers/net/wan/sbni.c
deleted file mode 100644
index 3092a09d3eaa..000000000000
--- a/drivers/net/wan/sbni.c
+++ /dev/null
@@ -1,1638 +0,0 @@ 
-/* sbni.c:  Granch SBNI12 leased line adapters driver for linux
- *
- *	Written 2001 by Denis I.Timofeev (timofeev@granch.ru)
- *
- *	Previous versions were written by Yaroslav Polyakov,
- *	Alexey Zverev and Max Khon.
- *
- *	Driver supports SBNI12-02,-04,-05,-10,-11 cards, single and
- *	double-channel, PCI and ISA modifications.
- *	More info and useful utilities to work with SBNI12 cards you can find
- *	at http://www.granch.com (English) or http://www.granch.ru (Russian)
- *
- *	This software may be used and distributed according to the terms
- *	of the GNU General Public License.
- *
- *
- *  5.0.1	Jun 22 2001
- *	  - Fixed bug in probe
- *  5.0.0	Jun 06 2001
- *	  - Driver was completely redesigned by Denis I.Timofeev,
- *	  - now PCI/Dual, ISA/Dual (with single interrupt line) models are
- *	  - supported
- *  3.3.0	Thu Feb 24 21:30:28 NOVT 2000 
- *        - PCI cards support
- *  3.2.0	Mon Dec 13 22:26:53 NOVT 1999
- * 	  - Completely rebuilt all the packet storage system
- * 	  -    to work in Ethernet-like style.
- *  3.1.1	just fixed some bugs (5 aug 1999)
- *  3.1.0	added balancing feature	(26 apr 1999)
- *  3.0.1	just fixed some bugs (14 apr 1999).
- *  3.0.0	Initial Revision, Yaroslav Polyakov (24 Feb 1999)
- *        - added pre-calculation for CRC, fixed bug with "len-2" frames, 
- *        - removed outbound fragmentation (MTU=1000), written CRC-calculation 
- *        - on asm, added work with hard_headers and now we have our own cache 
- *        - for them, optionally supported word-interchange on some chipsets,
- * 
- *	Known problem: this driver wasn't tested on multiprocessor machine.
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/ptrace.h>
-#include <linux/fcntl.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/pci.h>
-#include <linux/skbuff.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-
-#include <net/net_namespace.h>
-#include <net/arp.h>
-#include <net/Space.h>
-
-#include <asm/io.h>
-#include <asm/types.h>
-#include <asm/byteorder.h>
-#include <asm/irq.h>
-#include <linux/uaccess.h>
-
-#include "sbni.h"
-
-/* device private data */
-
-struct net_local {
-	struct timer_list	watchdog;
-	struct net_device	*watchdog_dev;
-
-	spinlock_t	lock;
-	struct sk_buff  *rx_buf_p;		/* receive buffer ptr */
-	struct sk_buff  *tx_buf_p;		/* transmit buffer ptr */
-	
-	unsigned int	framelen;		/* current frame length */
-	unsigned int	maxframe;		/* maximum valid frame length */
-	unsigned int	state;
-	unsigned int	inppos, outpos;		/* positions in rx/tx buffers */
-
-	/* transmitting frame number - from frames qty to 1 */
-	unsigned int	tx_frameno;
-
-	/* expected number of next receiving frame */
-	unsigned int	wait_frameno;
-
-	/* count of failed attempts to frame send - 32 attempts do before
-	   error - while receiver tunes on opposite side of wire */
-	unsigned int	trans_errors;
-
-	/* idle time; send pong when limit exceeded */
-	unsigned int	timer_ticks;
-
-	/* fields used for receive level autoselection */
-	int	delta_rxl;
-	unsigned int	cur_rxl_index, timeout_rxl;
-	unsigned long	cur_rxl_rcvd, prev_rxl_rcvd;
-
-	struct sbni_csr1	csr1;		/* current value of CSR1 */
-	struct sbni_in_stats	in_stats; 	/* internal statistics */ 
-
-	struct net_device		*second;	/* for ISA/dual cards */
-
-#ifdef CONFIG_SBNI_MULTILINE
-	struct net_device		*master;
-	struct net_device		*link;
-#endif
-};
-
-
-static int  sbni_card_probe( unsigned long );
-static int  sbni_pci_probe( struct net_device  * );
-static struct net_device  *sbni_probe1(struct net_device *, unsigned long, int);
-static int  sbni_open( struct net_device * );
-static int  sbni_close( struct net_device * );
-static netdev_tx_t sbni_start_xmit(struct sk_buff *,
-					 struct net_device * );
-static int  sbni_ioctl( struct net_device *, struct ifreq *, int );
-static void  set_multicast_list( struct net_device * );
-
-static irqreturn_t sbni_interrupt( int, void * );
-static void  handle_channel( struct net_device * );
-static int   recv_frame( struct net_device * );
-static void  send_frame( struct net_device * );
-static int   upload_data( struct net_device *,
-			  unsigned, unsigned, unsigned, u32 );
-static void  download_data( struct net_device *, u32 * );
-static void  sbni_watchdog(struct timer_list *);
-static void  interpret_ack( struct net_device *, unsigned );
-static int   append_frame_to_pkt( struct net_device *, unsigned, u32 );
-static void  indicate_pkt( struct net_device * );
-static void  card_start( struct net_device * );
-static void  prepare_to_send( struct sk_buff *, struct net_device * );
-static void  drop_xmit_queue( struct net_device * );
-static void  send_frame_header( struct net_device *, u32 * );
-static int   skip_tail( unsigned int, unsigned int, u32 );
-static int   check_fhdr( u32, u32 *, u32 *, u32 *, u32 *, u32 * );
-static void  change_level( struct net_device * );
-static void  timeout_change_level( struct net_device * );
-static u32   calc_crc32( u32, u8 *, u32 );
-static struct sk_buff *  get_rx_buf( struct net_device * );
-static int  sbni_init( struct net_device * );
-
-#ifdef CONFIG_SBNI_MULTILINE
-static int  enslave( struct net_device *, struct net_device * );
-static int  emancipate( struct net_device * );
-#endif
-
-static const char  version[] =
-	"Granch SBNI12 driver ver 5.0.1  Jun 22 2001  Denis I.Timofeev.\n";
-
-static bool skip_pci_probe	__initdata = false;
-static int  scandone	__initdata = 0;
-static int  num		__initdata = 0;
-
-static unsigned char  rxl_tab[];
-static u32  crc32tab[];
-
-/* A list of all installed devices, for removing the driver module. */
-static struct net_device  *sbni_cards[ SBNI_MAX_NUM_CARDS ];
-
-/* Lists of device's parameters */
-static u32	io[   SBNI_MAX_NUM_CARDS ] __initdata =
-	{ [0 ... SBNI_MAX_NUM_CARDS-1] = -1 };
-static u32	irq[  SBNI_MAX_NUM_CARDS ] __initdata;
-static u32	baud[ SBNI_MAX_NUM_CARDS ] __initdata;
-static u32	rxl[  SBNI_MAX_NUM_CARDS ] __initdata =
-	{ [0 ... SBNI_MAX_NUM_CARDS-1] = -1 };
-static u32	mac[  SBNI_MAX_NUM_CARDS ] __initdata;
-
-#ifndef MODULE
-typedef u32  iarr[];
-static iarr *dest[5] __initdata = { &io, &irq, &baud, &rxl, &mac };
-#endif
-
-/* A zero-terminated list of I/O addresses to be probed on ISA bus */
-static unsigned int  netcard_portlist[ ] __initdata = { 
-	0x210, 0x214, 0x220, 0x224, 0x230, 0x234, 0x240, 0x244, 0x250, 0x254,
-	0x260, 0x264, 0x270, 0x274, 0x280, 0x284, 0x290, 0x294, 0x2a0, 0x2a4,
-	0x2b0, 0x2b4, 0x2c0, 0x2c4, 0x2d0, 0x2d4, 0x2e0, 0x2e4, 0x2f0, 0x2f4,
-	0 };
-
-#define NET_LOCAL_LOCK(dev) (((struct net_local *)netdev_priv(dev))->lock)
-
-/*
- * Look for SBNI card which addr stored in dev->base_addr, if nonzero.
- * Otherwise, look through PCI bus. If none PCI-card was found, scan ISA.
- */
-
-static inline int __init
-sbni_isa_probe( struct net_device  *dev )
-{
-	if( dev->base_addr > 0x1ff &&
-	    request_region( dev->base_addr, SBNI_IO_EXTENT, dev->name ) &&
-	    sbni_probe1( dev, dev->base_addr, dev->irq ) )
-
-		return  0;
-	else {
-		pr_err("base address 0x%lx is busy, or adapter is malfunctional!\n",
-		       dev->base_addr);
-		return  -ENODEV;
-	}
-}
-
-static const struct net_device_ops sbni_netdev_ops = {
-	.ndo_open		= sbni_open,
-	.ndo_stop		= sbni_close,
-	.ndo_start_xmit		= sbni_start_xmit,
-	.ndo_set_rx_mode	= set_multicast_list,
-	.ndo_do_ioctl		= sbni_ioctl,
-	.ndo_set_mac_address 	= eth_mac_addr,
-	.ndo_validate_addr	= eth_validate_addr,
-};
-
-static void __init sbni_devsetup(struct net_device *dev)
-{
-	ether_setup( dev );
-	dev->netdev_ops = &sbni_netdev_ops;
-}
-
-int __init sbni_probe(int unit)
-{
-	struct net_device *dev;
-	int err;
-
-	dev = alloc_netdev(sizeof(struct net_local), "sbni",
-			   NET_NAME_UNKNOWN, sbni_devsetup);
-	if (!dev)
-		return -ENOMEM;
-
-	dev->netdev_ops = &sbni_netdev_ops;
-
-	sprintf(dev->name, "sbni%d", unit);
-	netdev_boot_setup_check(dev);
-
-	err = sbni_init(dev);
-	if (err) {
-		free_netdev(dev);
-		return err;
-	}
-
-	err = register_netdev(dev);
-	if (err) {
-		release_region( dev->base_addr, SBNI_IO_EXTENT );
-		free_netdev(dev);
-		return err;
-	}
-	pr_info_once("%s", version);
-	return 0;
-}
-
-static int __init sbni_init(struct net_device *dev)
-{
-	int  i;
-	if( dev->base_addr )
-		return  sbni_isa_probe( dev );
-	/* otherwise we have to perform search our adapter */
-
-	if( io[ num ] != -1 ) {
-		dev->base_addr	= io[ num ];
-		dev->irq	= irq[ num ];
-	} else if( scandone  ||  io[ 0 ] != -1 ) {
-		return  -ENODEV;
-	}
-
-	/* if io[ num ] contains non-zero address, then that is on ISA bus */
-	if( dev->base_addr )
-		return  sbni_isa_probe( dev );
-
-	/* ...otherwise - scan PCI first */
-	if( !skip_pci_probe  &&  !sbni_pci_probe( dev ) )
-		return  0;
-
-	if( io[ num ] == -1 ) {
-		/* Auto-scan will be stopped when first ISA card were found */
-		scandone = 1;
-		if( num > 0 )
-			return  -ENODEV;
-	}
-
-	for( i = 0;  netcard_portlist[ i ];  ++i ) {
-		int  ioaddr = netcard_portlist[ i ];
-		if( request_region( ioaddr, SBNI_IO_EXTENT, dev->name ) &&
-		    sbni_probe1( dev, ioaddr, 0 ))
-			return 0;
-	}
-
-	return  -ENODEV;
-}
-
-
-static int __init
-sbni_pci_probe( struct net_device  *dev )
-{
-	struct pci_dev  *pdev = NULL;
-
-	while( (pdev = pci_get_class( PCI_CLASS_NETWORK_OTHER << 8, pdev ))
-	       != NULL ) {
-		int  pci_irq_line;
-		unsigned long  pci_ioaddr;
-
-		if( pdev->vendor != SBNI_PCI_VENDOR &&
-		    pdev->device != SBNI_PCI_DEVICE )
-			continue;
-
-		pci_ioaddr = pci_resource_start( pdev, 0 );
-		pci_irq_line = pdev->irq;
-
-		/* Avoid already found cards from previous calls */
-		if( !request_region( pci_ioaddr, SBNI_IO_EXTENT, dev->name ) ) {
-			if (pdev->subsystem_device != 2)
-				continue;
-
-			/* Dual adapter is present */
-			if (!request_region(pci_ioaddr += 4, SBNI_IO_EXTENT,
-							dev->name ) )
-				continue;
-		}
-
-		if (pci_irq_line <= 0 || pci_irq_line >= nr_irqs)
-			pr_warn(
-"WARNING: The PCI BIOS assigned this PCI card to IRQ %d, which is unlikely to work!.\n"
-"You should use the PCI BIOS setup to assign a valid IRQ line.\n",
-				pci_irq_line );
-
-		/* avoiding re-enable dual adapters */
-		if( (pci_ioaddr & 7) == 0  &&  pci_enable_device( pdev ) ) {
-			release_region( pci_ioaddr, SBNI_IO_EXTENT );
-			pci_dev_put( pdev );
-			return  -EIO;
-		}
-		if( sbni_probe1( dev, pci_ioaddr, pci_irq_line ) ) {
-			SET_NETDEV_DEV(dev, &pdev->dev);
-			/* not the best thing to do, but this is all messed up 
-			   for hotplug systems anyway... */
-			pci_dev_put( pdev );
-			return  0;
-		}
-	}
-	return  -ENODEV;
-}
-
-
-static struct net_device * __init
-sbni_probe1( struct net_device  *dev,  unsigned long  ioaddr,  int  irq )
-{
-	struct net_local  *nl;
-
-	if( sbni_card_probe( ioaddr ) ) {
-		release_region( ioaddr, SBNI_IO_EXTENT );
-		return NULL;
-	}
-
-	outb( 0, ioaddr + CSR0 );
-
-	if( irq < 2 ) {
-		unsigned long irq_mask;
-
-		irq_mask = probe_irq_on();
-		outb( EN_INT | TR_REQ, ioaddr + CSR0 );
-		outb( PR_RES, ioaddr + CSR1 );
-		mdelay(50);
-		irq = probe_irq_off(irq_mask);
-		outb( 0, ioaddr + CSR0 );
-
-		if( !irq ) {
-			pr_err("%s: can't detect device irq!\n", dev->name);
-			release_region( ioaddr, SBNI_IO_EXTENT );
-			return NULL;
-		}
-	} else if( irq == 2 )
-		irq = 9;
-
-	dev->irq = irq;
-	dev->base_addr = ioaddr;
-
-	/* Fill in sbni-specific dev fields. */
-	nl = netdev_priv(dev);
-	if( !nl ) {
-		pr_err("%s: unable to get memory!\n", dev->name);
-		release_region( ioaddr, SBNI_IO_EXTENT );
-		return NULL;
-	}
-
-	memset( nl, 0, sizeof(struct net_local) );
-	spin_lock_init( &nl->lock );
-
-	/* store MAC address (generate if that isn't known) */
-	*(__be16 *)dev->dev_addr = htons( 0x00ff );
-	*(__be32 *)(dev->dev_addr + 2) = htonl( 0x01000000 |
-		((mac[num] ?
-		mac[num] :
-		(u32)((long)netdev_priv(dev))) & 0x00ffffff));
-
-	/* store link settings (speed, receive level ) */
-	nl->maxframe  = DEFAULT_FRAME_LEN;
-	nl->csr1.rate = baud[ num ];
-
-	if( (nl->cur_rxl_index = rxl[ num ]) == -1 ) {
-		/* autotune rxl */
-		nl->cur_rxl_index = DEF_RXL;
-		nl->delta_rxl = DEF_RXL_DELTA;
-	} else {
-		nl->delta_rxl = 0;
-	}
-	nl->csr1.rxl  = rxl_tab[ nl->cur_rxl_index ];
-	if( inb( ioaddr + CSR0 ) & 0x01 )
-		nl->state |= FL_SLOW_MODE;
-
-	pr_notice("%s: ioaddr %#lx, irq %d, MAC: 00:ff:01:%02x:%02x:%02x\n",
-		  dev->name, dev->base_addr, dev->irq,
-		  ((u8 *)dev->dev_addr)[3],
-		  ((u8 *)dev->dev_addr)[4],
-		  ((u8 *)dev->dev_addr)[5]);
-
-	pr_notice("%s: speed %d",
-		  dev->name,
-		  ((nl->state & FL_SLOW_MODE) ? 500000 : 2000000)
-		  / (1 << nl->csr1.rate));
-
-	if( nl->delta_rxl == 0 )
-		pr_cont(", receive level 0x%x (fixed)\n", nl->cur_rxl_index);
-	else
-		pr_cont(", receive level (auto)\n");
-
-#ifdef CONFIG_SBNI_MULTILINE
-	nl->master = dev;
-	nl->link   = NULL;
-#endif
-   
-	sbni_cards[ num++ ] = dev;
-	return  dev;
-}
-
-/* -------------------------------------------------------------------------- */
-
-#ifdef CONFIG_SBNI_MULTILINE
-
-static netdev_tx_t
-sbni_start_xmit( struct sk_buff  *skb,  struct net_device  *dev )
-{
-	struct net_device  *p;
-
-	netif_stop_queue( dev );
-
-	/* Looking for idle device in the list */
-	for( p = dev;  p; ) {
-		struct net_local  *nl = netdev_priv(p);
-		spin_lock( &nl->lock );
-		if( nl->tx_buf_p  ||  (nl->state & FL_LINE_DOWN) ) {
-			p = nl->link;
-			spin_unlock( &nl->lock );
-		} else {
-			/* Idle dev is found */
-			prepare_to_send( skb, p );
-			spin_unlock( &nl->lock );
-			netif_start_queue( dev );
-			return NETDEV_TX_OK;
-		}
-	}
-
-	return NETDEV_TX_BUSY;
-}
-
-#else	/* CONFIG_SBNI_MULTILINE */
-
-static netdev_tx_t
-sbni_start_xmit( struct sk_buff  *skb,  struct net_device  *dev )
-{
-	struct net_local  *nl  = netdev_priv(dev);
-
-	netif_stop_queue( dev );
-	spin_lock( &nl->lock );
-
-	prepare_to_send( skb, dev );
-
-	spin_unlock( &nl->lock );
-	return NETDEV_TX_OK;
-}
-
-#endif	/* CONFIG_SBNI_MULTILINE */
-
-/* -------------------------------------------------------------------------- */
-
-/* interrupt handler */
-
-/*
- * 	SBNI12D-10, -11/ISA boards within "common interrupt" mode could not
- * be looked as two independent single-channel devices. Every channel seems
- * as Ethernet interface but interrupt handler must be common. Really, first
- * channel ("master") driver only registers the handler. In its struct net_local
- * it has got pointer to "slave" channel's struct net_local and handles that's
- * interrupts too.
- *	dev of successfully attached ISA SBNI boards is linked to list.
- * While next board driver is initialized, it scans this list. If one
- * has found dev with same irq and ioaddr different by 4 then it assumes
- * this board to be "master".
- */ 
-
-static irqreturn_t
-sbni_interrupt( int  irq,  void  *dev_id )
-{
-	struct net_device	  *dev = dev_id;
-	struct net_local  *nl  = netdev_priv(dev);
-	int	repeat;
-
-	spin_lock( &nl->lock );
-	if( nl->second )
-		spin_lock(&NET_LOCAL_LOCK(nl->second));
-
-	do {
-		repeat = 0;
-		if( inb( dev->base_addr + CSR0 ) & (RC_RDY | TR_RDY) ) {
-			handle_channel( dev );
-			repeat = 1;
-		}
-		if( nl->second  && 	/* second channel present */
-		    (inb( nl->second->base_addr+CSR0 ) & (RC_RDY | TR_RDY)) ) {
-			handle_channel( nl->second );
-			repeat = 1;
-		}
-	} while( repeat );
-
-	if( nl->second )
-		spin_unlock(&NET_LOCAL_LOCK(nl->second));
-	spin_unlock( &nl->lock );
-	return IRQ_HANDLED;
-}
-
-
-static void
-handle_channel( struct net_device  *dev )
-{
-	struct net_local	*nl    = netdev_priv(dev);
-	unsigned long		ioaddr = dev->base_addr;
-
-	int  req_ans;
-	unsigned char  csr0;
-
-#ifdef CONFIG_SBNI_MULTILINE
-	/* Lock the master device because we going to change its local data */
-	if( nl->state & FL_SLAVE )
-		spin_lock(&NET_LOCAL_LOCK(nl->master));
-#endif
-
-	outb( (inb( ioaddr + CSR0 ) & ~EN_INT) | TR_REQ, ioaddr + CSR0 );
-
-	nl->timer_ticks = CHANGE_LEVEL_START_TICKS;
-	for(;;) {
-		csr0 = inb( ioaddr + CSR0 );
-		if( ( csr0 & (RC_RDY | TR_RDY) ) == 0 )
-			break;
-
-		req_ans = !(nl->state & FL_PREV_OK);
-
-		if( csr0 & RC_RDY )
-			req_ans = recv_frame( dev );
-
-		/*
-		 * TR_RDY always equals 1 here because we have owned the marker,
-		 * and we set TR_REQ when disabled interrupts
-		 */
-		csr0 = inb( ioaddr + CSR0 );
-		if( !(csr0 & TR_RDY)  ||  (csr0 & RC_RDY) )
-			netdev_err(dev, "internal error!\n");
-
-		/* if state & FL_NEED_RESEND != 0 then tx_frameno != 0 */
-		if( req_ans  ||  nl->tx_frameno != 0 )
-			send_frame( dev );
-		else
-			/* send marker without any data */
-			outb( inb( ioaddr + CSR0 ) & ~TR_REQ, ioaddr + CSR0 );
-	}
-
-	outb( inb( ioaddr + CSR0 ) | EN_INT, ioaddr + CSR0 );
-
-#ifdef CONFIG_SBNI_MULTILINE
-	if( nl->state & FL_SLAVE )
-		spin_unlock(&NET_LOCAL_LOCK(nl->master));
-#endif
-}
-
-
-/*
- * Routine returns 1 if it needs to acknowledge received frame.
- * Empty frame received without errors won't be acknowledged.
- */
-
-static int
-recv_frame( struct net_device  *dev )
-{
-	struct net_local  *nl   = netdev_priv(dev);
-	unsigned long  ioaddr	= dev->base_addr;
-
-	u32  crc = CRC32_INITIAL;
-
-	unsigned  framelen = 0, frameno, ack;
-	unsigned  is_first, frame_ok = 0;
-
-	if( check_fhdr( ioaddr, &framelen, &frameno, &ack, &is_first, &crc ) ) {
-		frame_ok = framelen > 4
-			?  upload_data( dev, framelen, frameno, is_first, crc )
-			:  skip_tail( ioaddr, framelen, crc );
-		if( frame_ok )
-			interpret_ack( dev, ack );
-	}
-
-	outb( inb( ioaddr + CSR0 ) ^ CT_ZER, ioaddr + CSR0 );
-	if( frame_ok ) {
-		nl->state |= FL_PREV_OK;
-		if( framelen > 4 )
-			nl->in_stats.all_rx_number++;
-	} else {
-		nl->state &= ~FL_PREV_OK;
-		change_level( dev );
-		nl->in_stats.all_rx_number++;
-		nl->in_stats.bad_rx_number++;
-	}
-
-	return  !frame_ok  ||  framelen > 4;
-}
-
-
-static void
-send_frame( struct net_device  *dev )
-{
-	struct net_local  *nl    = netdev_priv(dev);
-
-	u32  crc = CRC32_INITIAL;
-
-	if( nl->state & FL_NEED_RESEND ) {
-
-		/* if frame was sended but not ACK'ed - resend it */
-		if( nl->trans_errors ) {
-			--nl->trans_errors;
-			if( nl->framelen != 0 )
-				nl->in_stats.resend_tx_number++;
-		} else {
-			/* cannot xmit with many attempts */
-#ifdef CONFIG_SBNI_MULTILINE
-			if( (nl->state & FL_SLAVE)  ||  nl->link )
-#endif
-			nl->state |= FL_LINE_DOWN;
-			drop_xmit_queue( dev );
-			goto  do_send;
-		}
-	} else
-		nl->trans_errors = TR_ERROR_COUNT;
-
-	send_frame_header( dev, &crc );
-	nl->state |= FL_NEED_RESEND;
-	/*
-	 * FL_NEED_RESEND will be cleared after ACK, but if empty
-	 * frame sended then in prepare_to_send next frame
-	 */
-
-
-	if( nl->framelen ) {
-		download_data( dev, &crc );
-		nl->in_stats.all_tx_number++;
-		nl->state |= FL_WAIT_ACK;
-	}
-
-	outsb( dev->base_addr + DAT, (u8 *)&crc, sizeof crc );
-
-do_send:
-	outb( inb( dev->base_addr + CSR0 ) & ~TR_REQ, dev->base_addr + CSR0 );
-
-	if( nl->tx_frameno )
-		/* next frame exists - we request card to send it */
-		outb( inb( dev->base_addr + CSR0 ) | TR_REQ,
-		      dev->base_addr + CSR0 );
-}
-
-
-/*
- * Write the frame data into adapter's buffer memory, and calculate CRC.
- * Do padding if necessary.
- */
-
-static void
-download_data( struct net_device  *dev,  u32  *crc_p )
-{
-	struct net_local  *nl    = netdev_priv(dev);
-	struct sk_buff    *skb	 = nl->tx_buf_p;
-
-	unsigned  len = min_t(unsigned int, skb->len - nl->outpos, nl->framelen);
-
-	outsb( dev->base_addr + DAT, skb->data + nl->outpos, len );
-	*crc_p = calc_crc32( *crc_p, skb->data + nl->outpos, len );
-
-	/* if packet too short we should write some more bytes to pad */
-	for( len = nl->framelen - len;  len--; ) {
-		outb( 0, dev->base_addr + DAT );
-		*crc_p = CRC32( 0, *crc_p );
-	}
-}
-
-
-static int
-upload_data( struct net_device  *dev,  unsigned  framelen,  unsigned  frameno,
-	     unsigned  is_first,  u32  crc )
-{
-	struct net_local  *nl = netdev_priv(dev);
-
-	int  frame_ok;
-
-	if( is_first ) {
-		nl->wait_frameno = frameno;
-		nl->inppos = 0;
-	}
-
-	if( nl->wait_frameno == frameno ) {
-
-		if( nl->inppos + framelen  <=  ETHER_MAX_LEN )
-			frame_ok = append_frame_to_pkt( dev, framelen, crc );
-
-		/*
-		 * if CRC is right but framelen incorrect then transmitter
-		 * error was occurred... drop entire packet
-		 */
-		else if( (frame_ok = skip_tail( dev->base_addr, framelen, crc ))
-			 != 0 ) {
-			nl->wait_frameno = 0;
-			nl->inppos = 0;
-#ifdef CONFIG_SBNI_MULTILINE
-			nl->master->stats.rx_errors++;
-			nl->master->stats.rx_missed_errors++;
-#else
-		        dev->stats.rx_errors++;
-			dev->stats.rx_missed_errors++;
-#endif
-		}
-			/* now skip all frames until is_first != 0 */
-	} else
-		frame_ok = skip_tail( dev->base_addr, framelen, crc );
-
-	if( is_first  &&  !frame_ok ) {
-		/*
-		 * Frame has been broken, but we had already stored
-		 * is_first... Drop entire packet.
-		 */
-		nl->wait_frameno = 0;
-#ifdef CONFIG_SBNI_MULTILINE
-		nl->master->stats.rx_errors++;
-		nl->master->stats.rx_crc_errors++;
-#else
-		dev->stats.rx_errors++;
-		dev->stats.rx_crc_errors++;
-#endif
-	}
-
-	return  frame_ok;
-}
-
-
-static inline void
-send_complete( struct net_device *dev )
-{
-	struct net_local  *nl = netdev_priv(dev);
-
-#ifdef CONFIG_SBNI_MULTILINE
-	nl->master->stats.tx_packets++;
-	nl->master->stats.tx_bytes += nl->tx_buf_p->len;
-#else
-	dev->stats.tx_packets++;
-	dev->stats.tx_bytes += nl->tx_buf_p->len;
-#endif
-	dev_consume_skb_irq(nl->tx_buf_p);
-
-	nl->tx_buf_p = NULL;
-
-	nl->outpos = 0;
-	nl->state &= ~(FL_WAIT_ACK | FL_NEED_RESEND);
-	nl->framelen   = 0;
-}
-
-
-static void
-interpret_ack( struct net_device  *dev,  unsigned  ack )
-{
-	struct net_local  *nl = netdev_priv(dev);
-
-	if( ack == FRAME_SENT_OK ) {
-		nl->state &= ~FL_NEED_RESEND;
-
-		if( nl->state & FL_WAIT_ACK ) {
-			nl->outpos += nl->framelen;
-
-			if( --nl->tx_frameno ) {
-				nl->framelen = min_t(unsigned int,
-						   nl->maxframe,
-						   nl->tx_buf_p->len - nl->outpos);
-			} else {
-				send_complete( dev );
-#ifdef CONFIG_SBNI_MULTILINE
-				netif_wake_queue( nl->master );
-#else
-				netif_wake_queue( dev );
-#endif
-			}
-		}
-	}
-
-	nl->state &= ~FL_WAIT_ACK;
-}
-
-
-/*
- * Glue received frame with previous fragments of packet.
- * Indicate packet when last frame would be accepted.
- */
-
-static int
-append_frame_to_pkt( struct net_device  *dev,  unsigned  framelen,  u32  crc )
-{
-	struct net_local  *nl = netdev_priv(dev);
-
-	u8  *p;
-
-	if( nl->inppos + framelen  >  ETHER_MAX_LEN )
-		return  0;
-
-	if( !nl->rx_buf_p  &&  !(nl->rx_buf_p = get_rx_buf( dev )) )
-		return  0;
-
-	p = nl->rx_buf_p->data + nl->inppos;
-	insb( dev->base_addr + DAT, p, framelen );
-	if( calc_crc32( crc, p, framelen ) != CRC32_REMAINDER )
-		return  0;
-
-	nl->inppos += framelen - 4;
-	if( --nl->wait_frameno == 0 )		/* last frame received */
-		indicate_pkt( dev );
-
-	return  1;
-}
-
-
-/*
- * Prepare to start output on adapter.
- * Transmitter will be actually activated when marker is accepted.
- */
-
-static void
-prepare_to_send( struct sk_buff  *skb,  struct net_device  *dev )
-{
-	struct net_local  *nl = netdev_priv(dev);
-
-	unsigned int  len;
-
-	/* nl->tx_buf_p == NULL here! */
-	if( nl->tx_buf_p )
-		netdev_err(dev, "memory leak!\n");
-
-	nl->outpos = 0;
-	nl->state &= ~(FL_WAIT_ACK | FL_NEED_RESEND);
-
-	len = skb->len;
-	if( len < SBNI_MIN_LEN )
-		len = SBNI_MIN_LEN;
-
-	nl->tx_buf_p	= skb;
-	nl->tx_frameno	= DIV_ROUND_UP(len, nl->maxframe);
-	nl->framelen	= len < nl->maxframe  ?  len  :  nl->maxframe;
-
-	outb( inb( dev->base_addr + CSR0 ) | TR_REQ,  dev->base_addr + CSR0 );
-#ifdef CONFIG_SBNI_MULTILINE
-	netif_trans_update(nl->master);
-#else
-	netif_trans_update(dev);
-#endif
-}
-
-
-static void
-drop_xmit_queue( struct net_device  *dev )
-{
-	struct net_local  *nl = netdev_priv(dev);
-
-	if( nl->tx_buf_p ) {
-		dev_kfree_skb_any( nl->tx_buf_p );
-		nl->tx_buf_p = NULL;
-#ifdef CONFIG_SBNI_MULTILINE
-		nl->master->stats.tx_errors++;
-		nl->master->stats.tx_carrier_errors++;
-#else
-		dev->stats.tx_errors++;
-		dev->stats.tx_carrier_errors++;
-#endif
-	}
-
-	nl->tx_frameno	= 0;
-	nl->framelen	= 0;
-	nl->outpos	= 0;
-	nl->state &= ~(FL_WAIT_ACK | FL_NEED_RESEND);
-#ifdef CONFIG_SBNI_MULTILINE
-	netif_start_queue( nl->master );
-	netif_trans_update(nl->master);
-#else
-	netif_start_queue( dev );
-	netif_trans_update(dev);
-#endif
-}
-
-
-static void
-send_frame_header( struct net_device  *dev,  u32  *crc_p )
-{
-	struct net_local  *nl  = netdev_priv(dev);
-
-	u32  crc = *crc_p;
-	u32  len_field = nl->framelen + 6;	/* CRC + frameno + reserved */
-	u8   value;
-
-	if( nl->state & FL_NEED_RESEND )
-		len_field |= FRAME_RETRY;	/* non-first attempt... */
-
-	if( nl->outpos == 0 )
-		len_field |= FRAME_FIRST;
-
-	len_field |= (nl->state & FL_PREV_OK) ? FRAME_SENT_OK : FRAME_SENT_BAD;
-	outb( SBNI_SIG, dev->base_addr + DAT );
-
-	value = (u8) len_field;
-	outb( value, dev->base_addr + DAT );
-	crc = CRC32( value, crc );
-	value = (u8) (len_field >> 8);
-	outb( value, dev->base_addr + DAT );
-	crc = CRC32( value, crc );
-
-	outb( nl->tx_frameno, dev->base_addr + DAT );
-	crc = CRC32( nl->tx_frameno, crc );
-	outb( 0, dev->base_addr + DAT );
-	crc = CRC32( 0, crc );
-	*crc_p = crc;
-}
-
-
-/*
- * if frame tail not needed (incorrect number or received twice),
- * it won't store, but CRC will be calculated
- */
-
-static int
-skip_tail( unsigned int  ioaddr,  unsigned int  tail_len,  u32 crc )
-{
-	while( tail_len-- )
-		crc = CRC32( inb( ioaddr + DAT ), crc );
-
-	return  crc == CRC32_REMAINDER;
-}
-
-
-/*
- * Preliminary checks if frame header is correct, calculates its CRC
- * and split it to simple fields
- */
-
-static int
-check_fhdr( u32  ioaddr,  u32  *framelen,  u32  *frameno,  u32  *ack,
-	    u32  *is_first,  u32  *crc_p )
-{
-	u32  crc = *crc_p;
-	u8   value;
-
-	if( inb( ioaddr + DAT ) != SBNI_SIG )
-		return  0;
-
-	value = inb( ioaddr + DAT );
-	*framelen = (u32)value;
-	crc = CRC32( value, crc );
-	value = inb( ioaddr + DAT );
-	*framelen |= ((u32)value) << 8;
-	crc = CRC32( value, crc );
-
-	*ack = *framelen & FRAME_ACK_MASK;
-	*is_first = (*framelen & FRAME_FIRST) != 0;
-
-	if( (*framelen &= FRAME_LEN_MASK) < 6 ||
-	    *framelen > SBNI_MAX_FRAME - 3 )
-		return  0;
-
-	value = inb( ioaddr + DAT );
-	*frameno = (u32)value;
-	crc = CRC32( value, crc );
-
-	crc = CRC32( inb( ioaddr + DAT ), crc );	/* reserved byte */
-	*framelen -= 2;
-
-	*crc_p = crc;
-	return  1;
-}
-
-
-static struct sk_buff *
-get_rx_buf( struct net_device  *dev )
-{
-	/* +2 is to compensate for the alignment fixup below */
-	struct sk_buff  *skb = dev_alloc_skb( ETHER_MAX_LEN + 2 );
-	if( !skb )
-		return  NULL;
-
-	skb_reserve( skb, 2 );		/* Align IP on longword boundaries */
-	return  skb;
-}
-
-
-static void
-indicate_pkt( struct net_device  *dev )
-{
-	struct net_local  *nl  = netdev_priv(dev);
-	struct sk_buff    *skb = nl->rx_buf_p;
-
-	skb_put( skb, nl->inppos );
-
-#ifdef CONFIG_SBNI_MULTILINE
-	skb->protocol = eth_type_trans( skb, nl->master );
-	netif_rx( skb );
-	++nl->master->stats.rx_packets;
-	nl->master->stats.rx_bytes += nl->inppos;
-#else
-	skb->protocol = eth_type_trans( skb, dev );
-	netif_rx( skb );
-	++dev->stats.rx_packets;
-	dev->stats.rx_bytes += nl->inppos;
-#endif
-	nl->rx_buf_p = NULL;	/* protocol driver will clear this sk_buff */
-}
-
-
-/* -------------------------------------------------------------------------- */
-
-/*
- * Routine checks periodically wire activity and regenerates marker if
- * connect was inactive for a long time.
- */
-
-static void
-sbni_watchdog(struct timer_list *t)
-{
-	struct net_local   *nl  = from_timer(nl, t, watchdog);
-	struct net_device  *dev = nl->watchdog_dev;
-	unsigned long	   flags;
-	unsigned char	   csr0;
-
-	spin_lock_irqsave( &nl->lock, flags );
-
-	csr0 = inb( dev->base_addr + CSR0 );
-	if( csr0 & RC_CHK ) {
-
-		if( nl->timer_ticks ) {
-			if( csr0 & (RC_RDY | BU_EMP) )
-				/* receiving not active */
-				nl->timer_ticks--;
-		} else {
-			nl->in_stats.timeout_number++;
-			if( nl->delta_rxl )
-				timeout_change_level( dev );
-
-			outb( *(u_char *)&nl->csr1 | PR_RES,
-			      dev->base_addr + CSR1 );
-			csr0 = inb( dev->base_addr + CSR0 );
-		}
-	} else
-		nl->state &= ~FL_LINE_DOWN;
-
-	outb( csr0 | RC_CHK, dev->base_addr + CSR0 ); 
-
-	mod_timer(t, jiffies + SBNI_TIMEOUT);
-
-	spin_unlock_irqrestore( &nl->lock, flags );
-}
-
-
-static unsigned char  rxl_tab[] = {
-	0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x08,
-	0x0a, 0x0c, 0x0f, 0x16, 0x18, 0x1a, 0x1c, 0x1f
-};
-
-#define SIZE_OF_TIMEOUT_RXL_TAB 4
-static unsigned char  timeout_rxl_tab[] = {
-	0x03, 0x05, 0x08, 0x0b
-};
-
-/* -------------------------------------------------------------------------- */
-
-static void
-card_start( struct net_device  *dev )
-{
-	struct net_local  *nl = netdev_priv(dev);
-
-	nl->timer_ticks = CHANGE_LEVEL_START_TICKS;
-	nl->state &= ~(FL_WAIT_ACK | FL_NEED_RESEND);
-	nl->state |= FL_PREV_OK;
-
-	nl->inppos = nl->outpos = 0;
-	nl->wait_frameno = 0;
-	nl->tx_frameno	 = 0;
-	nl->framelen	 = 0;
-
-	outb( *(u_char *)&nl->csr1 | PR_RES, dev->base_addr + CSR1 );
-	outb( EN_INT, dev->base_addr + CSR0 );
-}
-
-/* -------------------------------------------------------------------------- */
-
-/* Receive level auto-selection */
-
-static void
-change_level( struct net_device  *dev )
-{
-	struct net_local  *nl = netdev_priv(dev);
-
-	if( nl->delta_rxl == 0 )	/* do not auto-negotiate RxL */
-		return;
-
-	if( nl->cur_rxl_index == 0 )
-		nl->delta_rxl = 1;
-	else if( nl->cur_rxl_index == 15 )
-		nl->delta_rxl = -1;
-	else if( nl->cur_rxl_rcvd < nl->prev_rxl_rcvd )
-		nl->delta_rxl = -nl->delta_rxl;
-
-	nl->csr1.rxl = rxl_tab[ nl->cur_rxl_index += nl->delta_rxl ];
-	inb( dev->base_addr + CSR0 );	/* needs for PCI cards */
-	outb( *(u8 *)&nl->csr1, dev->base_addr + CSR1 );
-
-	nl->prev_rxl_rcvd = nl->cur_rxl_rcvd;
-	nl->cur_rxl_rcvd  = 0;
-}
-
-
-static void
-timeout_change_level( struct net_device  *dev )
-{
-	struct net_local  *nl = netdev_priv(dev);
-
-	nl->cur_rxl_index = timeout_rxl_tab[ nl->timeout_rxl ];
-	if( ++nl->timeout_rxl >= 4 )
-		nl->timeout_rxl = 0;
-
-	nl->csr1.rxl = rxl_tab[ nl->cur_rxl_index ];
-	inb( dev->base_addr + CSR0 );
-	outb( *(unsigned char *)&nl->csr1, dev->base_addr + CSR1 );
-
-	nl->prev_rxl_rcvd = nl->cur_rxl_rcvd;
-	nl->cur_rxl_rcvd  = 0;
-}
-
-/* -------------------------------------------------------------------------- */
-
-/*
- *	Open/initialize the board. 
- */
-
-static int
-sbni_open( struct net_device  *dev )
-{
-	struct net_local	*nl = netdev_priv(dev);
-	struct timer_list	*w  = &nl->watchdog;
-
-	/*
-	 * For double ISA adapters within "common irq" mode, we have to
-	 * determine whether primary or secondary channel is initialized,
-	 * and set the irq handler only in first case.
-	 */
-	if( dev->base_addr < 0x400 ) {		/* ISA only */
-		struct net_device  **p = sbni_cards;
-		for( ;  *p  &&  p < sbni_cards + SBNI_MAX_NUM_CARDS;  ++p )
-			if( (*p)->irq == dev->irq &&
-			    ((*p)->base_addr == dev->base_addr + 4 ||
-			     (*p)->base_addr == dev->base_addr - 4) &&
-			    (*p)->flags & IFF_UP ) {
-
-				((struct net_local *) (netdev_priv(*p)))
-					->second = dev;
-				netdev_notice(dev, "using shared irq with %s\n",
-					      (*p)->name);
-				nl->state |= FL_SECONDARY;
-				goto  handler_attached;
-			}
-	}
-
-	if( request_irq(dev->irq, sbni_interrupt, IRQF_SHARED, dev->name, dev) ) {
-		netdev_err(dev, "unable to get IRQ %d\n", dev->irq);
-		return  -EAGAIN;
-	}
-
-handler_attached:
-
-	spin_lock( &nl->lock );
-	memset( &dev->stats, 0, sizeof(struct net_device_stats) );
-	memset( &nl->in_stats, 0, sizeof(struct sbni_in_stats) );
-
-	card_start( dev );
-
-	netif_start_queue( dev );
-
-	/* set timer watchdog */
-	nl->watchdog_dev = dev;
-	timer_setup(w, sbni_watchdog, 0);
-	w->expires	= jiffies + SBNI_TIMEOUT;
-	add_timer( w );
-   
-	spin_unlock( &nl->lock );
-	return 0;
-}
-
-
-static int
-sbni_close( struct net_device  *dev )
-{
-	struct net_local  *nl = netdev_priv(dev);
-
-	if( nl->second  &&  nl->second->flags & IFF_UP ) {
-		netdev_notice(dev, "Secondary channel (%s) is active!\n",
-			      nl->second->name);
-		return  -EBUSY;
-	}
-
-#ifdef CONFIG_SBNI_MULTILINE
-	if( nl->state & FL_SLAVE )
-		emancipate( dev );
-	else
-		while( nl->link )	/* it's master device! */
-			emancipate( nl->link );
-#endif
-
-	spin_lock( &nl->lock );
-
-	nl->second = NULL;
-	drop_xmit_queue( dev );	
-	netif_stop_queue( dev );
-   
-	del_timer( &nl->watchdog );
-
-	outb( 0, dev->base_addr + CSR0 );
-
-	if( !(nl->state & FL_SECONDARY) )
-		free_irq( dev->irq, dev );
-	nl->state &= FL_SECONDARY;
-
-	spin_unlock( &nl->lock );
-	return 0;
-}
-
-
-/*
-	Valid combinations in CSR0 (for probing):
-
-	VALID_DECODER	0000,0011,1011,1010
-
-				    	; 0   ; -
-				TR_REQ	; 1   ; +
-			TR_RDY	    	; 2   ; -
-			TR_RDY	TR_REQ	; 3   ; +
-		BU_EMP		    	; 4   ; +
-		BU_EMP	     	TR_REQ	; 5   ; +
-		BU_EMP	TR_RDY	    	; 6   ; -
-		BU_EMP	TR_RDY	TR_REQ	; 7   ; +
-	RC_RDY 		     		; 8   ; +
-	RC_RDY			TR_REQ	; 9   ; +
-	RC_RDY		TR_RDY		; 10  ; -
-	RC_RDY		TR_RDY	TR_REQ	; 11  ; -
-	RC_RDY	BU_EMP			; 12  ; -
-	RC_RDY	BU_EMP		TR_REQ	; 13  ; -
-	RC_RDY	BU_EMP	TR_RDY		; 14  ; -
-	RC_RDY	BU_EMP	TR_RDY	TR_REQ	; 15  ; -
-*/
-
-#define VALID_DECODER (2 + 8 + 0x10 + 0x20 + 0x80 + 0x100 + 0x200)
-
-
-static int
-sbni_card_probe( unsigned long  ioaddr )
-{
-	unsigned char  csr0;
-
-	csr0 = inb( ioaddr + CSR0 );
-	if( csr0 != 0xff  &&  csr0 != 0x00 ) {
-		csr0 &= ~EN_INT;
-		if( csr0 & BU_EMP )
-			csr0 |= EN_INT;
-      
-		if( VALID_DECODER & (1 << (csr0 >> 4)) )
-			return  0;
-	}
-   
-	return  -ENODEV;
-}
-
-/* -------------------------------------------------------------------------- */
-
-static int
-sbni_ioctl( struct net_device  *dev,  struct ifreq  *ifr,  int  cmd )
-{
-	struct net_local  *nl = netdev_priv(dev);
-	struct sbni_flags  flags;
-	int  error = 0;
-
-#ifdef CONFIG_SBNI_MULTILINE
-	struct net_device  *slave_dev;
-	char  slave_name[ 8 ];
-#endif
-  
-	switch( cmd ) {
-	case  SIOCDEVGETINSTATS :
-		if (copy_to_user( ifr->ifr_data, &nl->in_stats,
-					sizeof(struct sbni_in_stats) ))
-			error = -EFAULT;
-		break;
-
-	case  SIOCDEVRESINSTATS :
-		if (!capable(CAP_NET_ADMIN))
-			return  -EPERM;
-		memset( &nl->in_stats, 0, sizeof(struct sbni_in_stats) );
-		break;
-
-	case  SIOCDEVGHWSTATE :
-		flags.mac_addr	= *(u32 *)(dev->dev_addr + 3);
-		flags.rate	= nl->csr1.rate;
-		flags.slow_mode	= (nl->state & FL_SLOW_MODE) != 0;
-		flags.rxl	= nl->cur_rxl_index;
-		flags.fixed_rxl	= nl->delta_rxl == 0;
-
-		if (copy_to_user( ifr->ifr_data, &flags, sizeof flags ))
-			error = -EFAULT;
-		break;
-
-	case  SIOCDEVSHWSTATE :
-		if (!capable(CAP_NET_ADMIN))
-			return  -EPERM;
-
-		spin_lock( &nl->lock );
-		flags = *(struct sbni_flags*) &ifr->ifr_ifru;
-		if( flags.fixed_rxl ) {
-			nl->delta_rxl = 0;
-			nl->cur_rxl_index = flags.rxl;
-		} else {
-			nl->delta_rxl = DEF_RXL_DELTA;
-			nl->cur_rxl_index = DEF_RXL;
-		}
-
-		nl->csr1.rxl = rxl_tab[ nl->cur_rxl_index ];
-		nl->csr1.rate = flags.rate;
-		outb( *(u8 *)&nl->csr1 | PR_RES, dev->base_addr + CSR1 );
-		spin_unlock( &nl->lock );
-		break;
-
-#ifdef CONFIG_SBNI_MULTILINE
-
-	case  SIOCDEVENSLAVE :
-		if (!capable(CAP_NET_ADMIN))
-			return  -EPERM;
-
-		if (copy_from_user( slave_name, ifr->ifr_data, sizeof slave_name ))
-			return -EFAULT;
-		slave_dev = dev_get_by_name(&init_net, slave_name );
-		if( !slave_dev  ||  !(slave_dev->flags & IFF_UP) ) {
-			netdev_err(dev, "trying to enslave non-active device %s\n",
-				   slave_name);
-			if (slave_dev)
-				dev_put(slave_dev);
-			return  -EPERM;
-		}
-
-		return  enslave( dev, slave_dev );
-
-	case  SIOCDEVEMANSIPATE :
-		if (!capable(CAP_NET_ADMIN))
-			return  -EPERM;
-
-		return  emancipate( dev );
-
-#endif	/* CONFIG_SBNI_MULTILINE */
-
-	default :
-		return  -EOPNOTSUPP;
-	}
-
-	return  error;
-}
-
-
-#ifdef CONFIG_SBNI_MULTILINE
-
-static int
-enslave( struct net_device  *dev,  struct net_device  *slave_dev )
-{
-	struct net_local  *nl  = netdev_priv(dev);
-	struct net_local  *snl = netdev_priv(slave_dev);
-
-	if( nl->state & FL_SLAVE )	/* This isn't master or free device */
-		return  -EBUSY;
-
-	if( snl->state & FL_SLAVE )	/* That was already enslaved */
-		return  -EBUSY;
-
-	spin_lock( &nl->lock );
-	spin_lock( &snl->lock );
-
-	/* append to list */
-	snl->link = nl->link;
-	nl->link  = slave_dev;
-	snl->master = dev;
-	snl->state |= FL_SLAVE;
-
-	/* Summary statistics of MultiLine operation will be stored
-	   in master's counters */
-	memset( &slave_dev->stats, 0, sizeof(struct net_device_stats) );
-	netif_stop_queue( slave_dev );
-	netif_wake_queue( dev );	/* Now we are able to transmit */
-
-	spin_unlock( &snl->lock );
-	spin_unlock( &nl->lock );
-	netdev_notice(dev, "slave device (%s) attached\n", slave_dev->name);
-	return  0;
-}
-
-
-static int
-emancipate( struct net_device  *dev )
-{
-	struct net_local   *snl = netdev_priv(dev);
-	struct net_device  *p   = snl->master;
-	struct net_local   *nl  = netdev_priv(p);
-
-	if( !(snl->state & FL_SLAVE) )
-		return  -EINVAL;
-
-	spin_lock( &nl->lock );
-	spin_lock( &snl->lock );
-	drop_xmit_queue( dev );
-
-	/* exclude from list */
-	for(;;) {	/* must be in list */
-		struct net_local  *t = netdev_priv(p);
-		if( t->link == dev ) {
-			t->link = snl->link;
-			break;
-		}
-		p = t->link;
-	}
-
-	snl->link = NULL;
-	snl->master = dev;
-	snl->state &= ~FL_SLAVE;
-
-	netif_start_queue( dev );
-
-	spin_unlock( &snl->lock );
-	spin_unlock( &nl->lock );
-
-	dev_put( dev );
-	return  0;
-}
-
-#endif
-
-static void
-set_multicast_list( struct net_device  *dev )
-{
-	return;		/* sbni always operate in promiscuos mode */
-}
-
-
-#ifdef MODULE
-module_param_hw_array(io, int, ioport, NULL, 0);
-module_param_hw_array(irq, int, irq, NULL, 0);
-module_param_array(baud, int, NULL, 0);
-module_param_array(rxl, int, NULL, 0);
-module_param_array(mac, int, NULL, 0);
-module_param(skip_pci_probe, bool, 0);
-
-MODULE_LICENSE("GPL");
-
-
-int __init init_module( void )
-{
-	struct net_device  *dev;
-	int err;
-
-	while( num < SBNI_MAX_NUM_CARDS ) {
-		dev = alloc_netdev(sizeof(struct net_local), "sbni%d",
-				   NET_NAME_UNKNOWN, sbni_devsetup);
-		if( !dev)
-			break;
-
-		sprintf( dev->name, "sbni%d", num );
-
-		err = sbni_init(dev);
-		if (err) {
-			free_netdev(dev);
-			break;
-		}
-
-		if( register_netdev( dev ) ) {
-			release_region( dev->base_addr, SBNI_IO_EXTENT );
-			free_netdev( dev );
-			break;
-		}
-	}
-
-	return  *sbni_cards  ?  0  :  -ENODEV;
-}
-
-void
-cleanup_module(void)
-{
-	int i;
-
-	for (i = 0;  i < SBNI_MAX_NUM_CARDS;  ++i) {
-		struct net_device *dev = sbni_cards[i];
-		if (dev != NULL) {
-			unregister_netdev(dev);
-			release_region(dev->base_addr, SBNI_IO_EXTENT);
-			free_netdev(dev);
-		}
-	}
-}
-
-#else	/* MODULE */
-
-static int __init
-sbni_setup( char  *p )
-{
-	int  n, parm;
-
-	if( *p++ != '(' )
-		goto  bad_param;
-
-	for( n = 0, parm = 0;  *p  &&  n < 8; ) {
-		(*dest[ parm ])[ n ] = simple_strtoul( p, &p, 0 );
-		if( !*p  ||  *p == ')' )
-			return 1;
-		if( *p == ';' ) {
-			++p;
-			++n;
-			parm = 0;
-		} else if( *p++ != ',' ) {
-			break;
-		} else {
-			if( ++parm >= 5 )
-				break;
-		}
-	}
-bad_param:
-	pr_err("Error in sbni kernel parameter!\n");
-	return 0;
-}
-
-__setup( "sbni=", sbni_setup );
-
-#endif	/* MODULE */
-
-/* -------------------------------------------------------------------------- */
-
-static u32
-calc_crc32( u32  crc,  u8  *p,  u32  len )
-{
-	while( len-- )
-		crc = CRC32( *p++, crc );
-
-	return  crc;
-}
-
-static u32  crc32tab[] __attribute__ ((aligned(8))) = {
-	0xD202EF8D,  0xA505DF1B,  0x3C0C8EA1,  0x4B0BBE37,
-	0xD56F2B94,  0xA2681B02,  0x3B614AB8,  0x4C667A2E,
-	0xDCD967BF,  0xABDE5729,  0x32D70693,  0x45D03605,
-	0xDBB4A3A6,  0xACB39330,  0x35BAC28A,  0x42BDF21C,
-	0xCFB5FFE9,  0xB8B2CF7F,  0x21BB9EC5,  0x56BCAE53,
-	0xC8D83BF0,  0xBFDF0B66,  0x26D65ADC,  0x51D16A4A,
-	0xC16E77DB,  0xB669474D,  0x2F6016F7,  0x58672661,
-	0xC603B3C2,  0xB1048354,  0x280DD2EE,  0x5F0AE278,
-	0xE96CCF45,  0x9E6BFFD3,  0x0762AE69,  0x70659EFF,
-	0xEE010B5C,  0x99063BCA,  0x000F6A70,  0x77085AE6,
-	0xE7B74777,  0x90B077E1,  0x09B9265B,  0x7EBE16CD,
-	0xE0DA836E,  0x97DDB3F8,  0x0ED4E242,  0x79D3D2D4,
-	0xF4DBDF21,  0x83DCEFB7,  0x1AD5BE0D,  0x6DD28E9B,
-	0xF3B61B38,  0x84B12BAE,  0x1DB87A14,  0x6ABF4A82,
-	0xFA005713,  0x8D076785,  0x140E363F,  0x630906A9,
-	0xFD6D930A,  0x8A6AA39C,  0x1363F226,  0x6464C2B0,
-	0xA4DEAE1D,  0xD3D99E8B,  0x4AD0CF31,  0x3DD7FFA7,
-	0xA3B36A04,  0xD4B45A92,  0x4DBD0B28,  0x3ABA3BBE,
-	0xAA05262F,  0xDD0216B9,  0x440B4703,  0x330C7795,
-	0xAD68E236,  0xDA6FD2A0,  0x4366831A,  0x3461B38C,
-	0xB969BE79,  0xCE6E8EEF,  0x5767DF55,  0x2060EFC3,
-	0xBE047A60,  0xC9034AF6,  0x500A1B4C,  0x270D2BDA,
-	0xB7B2364B,  0xC0B506DD,  0x59BC5767,  0x2EBB67F1,
-	0xB0DFF252,  0xC7D8C2C4,  0x5ED1937E,  0x29D6A3E8,
-	0x9FB08ED5,  0xE8B7BE43,  0x71BEEFF9,  0x06B9DF6F,
-	0x98DD4ACC,  0xEFDA7A5A,  0x76D32BE0,  0x01D41B76,
-	0x916B06E7,  0xE66C3671,  0x7F6567CB,  0x0862575D,
-	0x9606C2FE,  0xE101F268,  0x7808A3D2,  0x0F0F9344,
-	0x82079EB1,  0xF500AE27,  0x6C09FF9D,  0x1B0ECF0B,
-	0x856A5AA8,  0xF26D6A3E,  0x6B643B84,  0x1C630B12,
-	0x8CDC1683,  0xFBDB2615,  0x62D277AF,  0x15D54739,
-	0x8BB1D29A,  0xFCB6E20C,  0x65BFB3B6,  0x12B88320,
-	0x3FBA6CAD,  0x48BD5C3B,  0xD1B40D81,  0xA6B33D17,
-	0x38D7A8B4,  0x4FD09822,  0xD6D9C998,  0xA1DEF90E,
-	0x3161E49F,  0x4666D409,  0xDF6F85B3,  0xA868B525,
-	0x360C2086,  0x410B1010,  0xD80241AA,  0xAF05713C,
-	0x220D7CC9,  0x550A4C5F,  0xCC031DE5,  0xBB042D73,
-	0x2560B8D0,  0x52678846,  0xCB6ED9FC,  0xBC69E96A,
-	0x2CD6F4FB,  0x5BD1C46D,  0xC2D895D7,  0xB5DFA541,
-	0x2BBB30E2,  0x5CBC0074,  0xC5B551CE,  0xB2B26158,
-	0x04D44C65,  0x73D37CF3,  0xEADA2D49,  0x9DDD1DDF,
-	0x03B9887C,  0x74BEB8EA,  0xEDB7E950,  0x9AB0D9C6,
-	0x0A0FC457,  0x7D08F4C1,  0xE401A57B,  0x930695ED,
-	0x0D62004E,  0x7A6530D8,  0xE36C6162,  0x946B51F4,
-	0x19635C01,  0x6E646C97,  0xF76D3D2D,  0x806A0DBB,
-	0x1E0E9818,  0x6909A88E,  0xF000F934,  0x8707C9A2,
-	0x17B8D433,  0x60BFE4A5,  0xF9B6B51F,  0x8EB18589,
-	0x10D5102A,  0x67D220BC,  0xFEDB7106,  0x89DC4190,
-	0x49662D3D,  0x3E611DAB,  0xA7684C11,  0xD06F7C87,
-	0x4E0BE924,  0x390CD9B2,  0xA0058808,  0xD702B89E,
-	0x47BDA50F,  0x30BA9599,  0xA9B3C423,  0xDEB4F4B5,
-	0x40D06116,  0x37D75180,  0xAEDE003A,  0xD9D930AC,
-	0x54D13D59,  0x23D60DCF,  0xBADF5C75,  0xCDD86CE3,
-	0x53BCF940,  0x24BBC9D6,  0xBDB2986C,  0xCAB5A8FA,
-	0x5A0AB56B,  0x2D0D85FD,  0xB404D447,  0xC303E4D1,
-	0x5D677172,  0x2A6041E4,  0xB369105E,  0xC46E20C8,
-	0x72080DF5,  0x050F3D63,  0x9C066CD9,  0xEB015C4F,
-	0x7565C9EC,  0x0262F97A,  0x9B6BA8C0,  0xEC6C9856,
-	0x7CD385C7,  0x0BD4B551,  0x92DDE4EB,  0xE5DAD47D,
-	0x7BBE41DE,  0x0CB97148,  0x95B020F2,  0xE2B71064,
-	0x6FBF1D91,  0x18B82D07,  0x81B17CBD,  0xF6B64C2B,
-	0x68D2D988,  0x1FD5E91E,  0x86DCB8A4,  0xF1DB8832,
-	0x616495A3,  0x1663A535,  0x8F6AF48F,  0xF86DC419,
-	0x660951BA,  0x110E612C,  0x88073096,  0xFF000000
-};
-
diff --git a/drivers/net/wan/sbni.h b/drivers/net/wan/sbni.h
deleted file mode 100644
index 84264510a8ed..000000000000
--- a/drivers/net/wan/sbni.h
+++ /dev/null
@@ -1,147 +0,0 @@ 
-/* sbni.h:  definitions for a Granch SBNI12 driver, version 5.0.0
- * Written 2001 Denis I.Timofeev (timofeev@granch.ru)
- * This file is distributed under the GNU GPL
- */
-
-#ifndef SBNI_H
-#define SBNI_H
-
-#ifdef SBNI_DEBUG
-#define DP( A ) A
-#else
-#define DP( A )
-#endif
-
-
-/* We don't have official vendor id yet... */
-#define SBNI_PCI_VENDOR 	0x55 
-#define SBNI_PCI_DEVICE 	0x9f
-
-#define ISA_MODE 0x00
-#define PCI_MODE 0x01
-
-#define	SBNI_IO_EXTENT	4
-
-enum sbni_reg {
-	CSR0 = 0,
-	CSR1 = 1,
-	DAT  = 2
-};
-
-/* CSR0 mapping */
-enum {
-	BU_EMP = 0x02,
-	RC_CHK = 0x04,
-	CT_ZER = 0x08,
-	TR_REQ = 0x10,
-	TR_RDY = 0x20,
-	EN_INT = 0x40,
-	RC_RDY = 0x80
-};
-
-
-/* CSR1 mapping */
-#define PR_RES 0x80
-
-struct sbni_csr1 {
-#ifdef __LITTLE_ENDIAN_BITFIELD
-	u8 rxl	: 5;
-	u8 rate	: 2;
-	u8 	: 1;
-#else
-	u8 	: 1;
-	u8 rate	: 2;
-	u8 rxl	: 5;
-#endif
-};
-
-/* fields in frame header */
-#define FRAME_ACK_MASK  (unsigned short)0x7000
-#define FRAME_LEN_MASK  (unsigned short)0x03FF
-#define FRAME_FIRST     (unsigned short)0x8000
-#define FRAME_RETRY     (unsigned short)0x0800
-
-#define FRAME_SENT_BAD  (unsigned short)0x4000
-#define FRAME_SENT_OK   (unsigned short)0x3000
-
-
-/* state flags */
-enum {
-	FL_WAIT_ACK    = 0x01,
-	FL_NEED_RESEND = 0x02,
-	FL_PREV_OK     = 0x04,
-	FL_SLOW_MODE   = 0x08,
-	FL_SECONDARY   = 0x10,
-#ifdef CONFIG_SBNI_MULTILINE
-	FL_SLAVE       = 0x20,
-#endif
-	FL_LINE_DOWN   = 0x40
-};
-
-
-enum {
-	DEFAULT_IOBASEADDR = 0x210,
-	DEFAULT_INTERRUPTNUMBER = 5,
-	DEFAULT_RATE = 0,
-	DEFAULT_FRAME_LEN = 1012
-};
-
-#define DEF_RXL_DELTA	-1
-#define DEF_RXL		0xf
-
-#define SBNI_SIG 0x5a
-
-#define	SBNI_MIN_LEN	60	/* Shortest Ethernet frame without FCS */
-#define SBNI_MAX_FRAME	1023
-#define ETHER_MAX_LEN	1518
-
-#define SBNI_TIMEOUT	(HZ/10)
-
-#define TR_ERROR_COUNT	32
-#define CHANGE_LEVEL_START_TICKS 4
-
-#define SBNI_MAX_NUM_CARDS	16
-
-/* internal SBNI-specific statistics */
-struct sbni_in_stats {
-	u32	all_rx_number;
-	u32	bad_rx_number;
-	u32	timeout_number;
-	u32	all_tx_number;
-	u32	resend_tx_number;
-};
-
-/* SBNI ioctl params */
-#define SIOCDEVGETINSTATS 	SIOCDEVPRIVATE
-#define SIOCDEVRESINSTATS 	SIOCDEVPRIVATE+1
-#define SIOCDEVGHWSTATE   	SIOCDEVPRIVATE+2
-#define SIOCDEVSHWSTATE   	SIOCDEVPRIVATE+3
-#define SIOCDEVENSLAVE  	SIOCDEVPRIVATE+4
-#define SIOCDEVEMANSIPATE  	SIOCDEVPRIVATE+5
-
-
-/* data packet for SIOCDEVGHWSTATE/SIOCDEVSHWSTATE ioctl requests */
-struct sbni_flags {
-	u32	rxl		: 4;
-	u32	rate		: 2;
-	u32	fixed_rxl	: 1;
-	u32	slow_mode	: 1;
-	u32	mac_addr	: 24;
-};
-
-/*
- * CRC-32 stuff
- */
-#define CRC32(c,crc) (crc32tab[((size_t)(crc) ^ (c)) & 0xff] ^ (((crc) >> 8) & 0x00FFFFFF))
-      /* CRC generator 0xEDB88320 */
-      /* CRC remainder 0x2144DF1C */
-      /* CRC initial value 0x00000000 */
-#define CRC32_REMAINDER 0x2144DF1C
-#define CRC32_INITIAL 0x00000000
-
-#ifndef __initdata
-#define __initdata
-#endif
-
-#endif
-
diff --git a/include/net/Space.h b/include/net/Space.h
index 93fd6caa4bad..08ca9cef0213 100644
--- a/include/net/Space.h
+++ b/include/net/Space.h
@@ -18,6 +18,3 @@  struct net_device *cops_probe(int unit);
 
 /* Fibre Channel adapters */
 int iph5526_probe(struct net_device *dev);
-
-/* SBNI adapters */
-int sbni_probe(int unit);