| Message ID | 20210516230551.12469-4-afaerber@suse.de |
|---|---|
| State | New |
| Headers | show |
| Series | arm64: dts: rockchip: Initial Toybrick TB-RK1808M0 support | expand |
Hi Andreas, Send the complete serie to all maintainers and mail lists. === Heiko's sort rules: compatible reg interrupts [alphabetical] status [if needed] === My incomplete list: For nodes: If exists on top: model, compatible and chosen. Sort things without reg alphabetical first, then sort the rest by reg address. Inside nodes: If exists on top: compatible, reg and interrupts. In alphabetical order the required properties. Then in alphabetical order the other properties. And as last things that start with '#' in alphabetical order. Add status below all other properties for soc internal components with any board-specifics. Keep an empty line between properties and nodes. Exceptions: Sort pinctrl-0 above pinctrl-names, so it stays in line with clock-names and dma-names. Sort simple-audio-card,name above other simple-audio-card properties. Sort regulator-name above other regulator properties. Sort regulator-min-microvolt above regulator-max-microvolt. === Fix complete dtsi for property sort order! Add more drivers. (cru, pinctrl) Johan On 5/17/21 1:05 AM, Andreas Färber wrote: > Add an initial Device Tree for Rockchip RK1808 SoC. > Based on shipping TB-RK1808M0 DTB. > > Signed-off-by: Andreas Färber <afaerber@suse.de> > --- > arch/arm64/boot/dts/rockchip/rk1808.dtsi | 203 +++++++++++++++++++++++ > 1 file changed, 203 insertions(+) > create mode 100644 arch/arm64/boot/dts/rockchip/rk1808.dtsi > > diff --git a/arch/arm64/boot/dts/rockchip/rk1808.dtsi b/arch/arm64/boot/dts/rockchip/rk1808.dtsi > new file mode 100644 > index 000000000000..af2b51afda7d > --- /dev/null > +++ b/arch/arm64/boot/dts/rockchip/rk1808.dtsi > @@ -0,0 +1,203 @@ > +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) > +/* > + * Copyright (c) 2021 Andreas Färber > + */ > + #include <dt-bindings/clock/rk1808-cru.h> > +#include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/interrupt-controller/irq.h> > + > +/ { > + compatible = "rockchip,rk1808"; > + interrupt-parent = <&gic>; > + #address-cells = <1>; > + #size-cells = <1>; #address-cells = <2>; #size-cells = <2>; 64 bit ?? > + > + aliases { > + serial0 = &uart0; > + serial1 = &uart1; > + serial2 = &uart2; > + serial3 = &uart3; > + serial4 = &uart4; > + serial5 = &uart5; > + serial6 = &uart6; > + serial7 = &uart7; > + }; > + > + cpus { > + #address-cells = <2>; > + #size-cells = <0>; > + > + cpu0: cpu@0 { > + device_type = "cpu"; > + compatible = "arm,cortex-a35"; > + reg = <0x0 0x0>; > + enable-method = "psci"; > + cpu-idle-states = <&CPU_SLEEP>; > + }; > + > + cpu1: cpu@1 { > + device_type = "cpu"; > + compatible = "arm,cortex-a35"; > + reg = <0x0 0x1>; > + enable-method = "psci"; > + cpu-idle-states = <&CPU_SLEEP>; > + }; > + > + idle-states { > + entry-method = "psci"; > + > + CPU_SLEEP: cpu-sleep { > + compatible = "arm,idle-state"; > + local-timer-stop; > + arm,psci-suspend-param = <0x10000>; > + entry-latency-us = <120>; > + exit-latency-us = <250>; > + min-residency-us = <900>; > + }; > + }; > + }; > + > + arm-pmu { sort node names > + compatible = "arm,cortex-a35-pmu"; > + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-affinity = <&cpu0>, <&cpu1>; > + }; > + > + timer { > + compatible = "arm,armv8-timer"; > + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, > + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, > + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, > + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; > + arm,no-tick-in-suspend; > + }; > + > + xin24m: xin24m { > + compatible = "fixed-clock"; > + clock-frequency = <24000000>; > + #clock-cells = <0>; > + clock-output-names = "xin24m"; > + }; > + > + firmware { sort node names > + psci { > + compatible = "arm,psci-1.0"; > + method = "smc"; > + }; > + > + tee { > + compatible = "linaro,optee-tz"; > + method = "smc"; > + }; > + }; > + > + soc { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; Remove, use 64bit reg. See: https://github.com/rockchip-linux/kernel/blob/develop-4.19/arch/arm64/boot/dts/rockchip/rk1808.dtsi > + > + system_sram: sram@fec00000 { > + compatible = "mmio-sram"; > + reg = <0xfec00000 0x200000>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0x0 0xfec00000 0x200000>; > + }; > + > + gic: interrupt-controller@ff100000 { > + compatible = "arm,gic-v3"; > + reg = <0xff100000 0x10000>, /* GICD */ > + <0xff140000 0xc0000>, /* GICR */ > + <0xff300000 0x10000>, /* GICC */ > + <0xff310000 0x10000>, /* GICH */ > + <0xff320000 0x10000>; /* GICV */ > + interrupt-controller; > + #interrupt-cells = <3>; > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + gic_its: msi-controller@ff120000 { > + compatible = "arm,gic-v3-its"; > + reg = <0xff120000 0x20000>; > + msi-controller; > + #msi-cells = <1>; > + }; > + }; > + > + uart0: serial@ff430000 { > + compatible = "rockchip,rk1808-uart", "snps,dw-apb-uart"; > + reg = <0xff430000 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; > + status = "disabled"; > + }; From manufacturer tree: uart0: serial@ff430000 { compatible = "rockchip,rk1808-uart", "snps,dw-apb-uart"; reg = <0x0 0xff430000 0x0 0x100>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_UART0_PMU>, <&cru PCLK_UART0_PMU>; clock-names = "baudclk", "apb_pclk"; dmas = <&dmac 0>, <&dmac 1>; pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; pinctrl-names = "default"; reg-io-width = <4>; reg-shift = <2>; status = "disabled"; }; Sort all uart nodes. Does this work without SCLK_UART0_PMU, PCLK_UART0_PMU and pinctrl?? Add clk-rk1808.c rk1808-cru.h In mainline pinctrl and gpio are WIP and split elsewhere now. pinctrl: rockchip: add support for rk1808 SoCs https://github.com/rockchip-linux/kernel/commit/b2828bc4417c9669fdaca3b8ef392f41850c86e7 > + > + uart1: serial@ff540000 { > + compatible = "rockchip,rk1808-uart", "snps,dw-apb-uart"; > + reg = <0xff540000 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; > + status = "disabled"; > + }; > + > + uart2: serial@ff550000 { > + compatible = "rockchip,rk1808-uart", "snps,dw-apb-uart"; > + reg = <0xff550000 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; > + status = "disabled"; > + }; > + > + uart3: serial@ff560000 { > + compatible = "rockchip,rk1808-uart", "snps,dw-apb-uart"; > + reg = <0xff560000 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; > + status = "disabled"; > + }; > + > + uart4: serial@ff570000 { > + compatible = "rockchip,rk1808-uart", "snps,dw-apb-uart"; > + reg = <0xff570000 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; > + status = "disabled"; > + }; > + > + uart5: serial@ff5a0000 { > + compatible = "rockchip,rk1808-uart", "snps,dw-apb-uart"; > + reg = <0xff5a0000 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; > + status = "disabled"; > + }; > + > + uart6: serial@ff5b0000 { > + compatible = "rockchip,rk1808-uart", "snps,dw-apb-uart"; > + reg = <0xff5b0000 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; > + status = "disabled"; > + }; > + > + uart7: serial@ff5c0000 { > + compatible = "rockchip,rk1808-uart", "snps,dw-apb-uart"; > + reg = <0xff5c0000 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; > + status = "disabled"; > + }; > + }; > +}; >
On Mon, 17 May 2021 00:05:45 +0100, Andreas Färber <afaerber@suse.de> wrote: > > Add an initial Device Tree for Rockchip RK1808 SoC. > Based on shipping TB-RK1808M0 DTB. > > Signed-off-by: Andreas Färber <afaerber@suse.de> > --- > arch/arm64/boot/dts/rockchip/rk1808.dtsi | 203 +++++++++++++++++++++++ > 1 file changed, 203 insertions(+) > create mode 100644 arch/arm64/boot/dts/rockchip/rk1808.dtsi > > diff --git a/arch/arm64/boot/dts/rockchip/rk1808.dtsi b/arch/arm64/boot/dts/rockchip/rk1808.dtsi > new file mode 100644 > index 000000000000..af2b51afda7d > --- /dev/null > +++ b/arch/arm64/boot/dts/rockchip/rk1808.dtsi > @@ -0,0 +1,203 @@ > +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) > +/* > + * Copyright (c) 2021 Andreas Färber > + */ > + > +#include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/interrupt-controller/irq.h> > + > +/ { > + compatible = "rockchip,rk1808"; > + interrupt-parent = <&gic>; > + #address-cells = <1>; > + #size-cells = <1>; > + > + aliases { > + serial0 = &uart0; > + serial1 = &uart1; > + serial2 = &uart2; > + serial3 = &uart3; > + serial4 = &uart4; > + serial5 = &uart5; > + serial6 = &uart6; > + serial7 = &uart7; > + }; > + > + cpus { > + #address-cells = <2>; > + #size-cells = <0>; > + > + cpu0: cpu@0 { > + device_type = "cpu"; > + compatible = "arm,cortex-a35"; > + reg = <0x0 0x0>; > + enable-method = "psci"; > + cpu-idle-states = <&CPU_SLEEP>; > + }; > + > + cpu1: cpu@1 { > + device_type = "cpu"; > + compatible = "arm,cortex-a35"; > + reg = <0x0 0x1>; > + enable-method = "psci"; > + cpu-idle-states = <&CPU_SLEEP>; > + }; > + > + idle-states { > + entry-method = "psci"; > + > + CPU_SLEEP: cpu-sleep { > + compatible = "arm,idle-state"; > + local-timer-stop; > + arm,psci-suspend-param = <0x10000>; > + entry-latency-us = <120>; > + exit-latency-us = <250>; > + min-residency-us = <900>; > + }; > + }; > + }; > + > + arm-pmu { > + compatible = "arm,cortex-a35-pmu"; > + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-affinity = <&cpu0>, <&cpu1>; > + }; > + > + timer { > + compatible = "arm,armv8-timer"; > + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, > + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, > + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, > + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; > + arm,no-tick-in-suspend; Another facepalm moment... > + }; > + > + xin24m: xin24m { > + compatible = "fixed-clock"; > + clock-frequency = <24000000>; > + #clock-cells = <0>; > + clock-output-names = "xin24m"; > + }; > + > + firmware { > + psci { > + compatible = "arm,psci-1.0"; > + method = "smc"; > + }; > + > + tee { > + compatible = "linaro,optee-tz"; > + method = "smc"; > + }; > + }; > + > + soc { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + system_sram: sram@fec00000 { > + compatible = "mmio-sram"; > + reg = <0xfec00000 0x200000>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0x0 0xfec00000 0x200000>; > + }; > + > + gic: interrupt-controller@ff100000 { > + compatible = "arm,gic-v3"; > + reg = <0xff100000 0x10000>, /* GICD */ > + <0xff140000 0xc0000>, /* GICR */ This is obviously wrong. You have two CPUs, and yet describe a range that spans 6. I guess this is a copy paste from rk3399 again? > + <0xff300000 0x10000>, /* GICC */ > + <0xff310000 0x10000>, /* GICH */ > + <0xff320000 0x10000>; /* GICV */ > + interrupt-controller; > + #interrupt-cells = <3>; > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + gic_its: msi-controller@ff120000 { > + compatible = "arm,gic-v3-its"; > + reg = <0xff120000 0x20000>; > + msi-controller; > + #msi-cells = <1>; > + }; What uses the ITS? M. -- Without deviation from the norm, progress is not possible.
Hi Johan, On 17.05.21 03:29, Johan Jonker wrote: > Send the complete serie to all maintainers and mail lists. That's unhelpful - all patches went to linux-rockchip, LAKML and LKML, and get_maintainers.pl was used. The cover letter was explicitly copied to DTML as get_maintainers.pl doesn't catch it. You'll find them here: https://lore.kernel.org/linux-rockchip/20210516230551.12469-1-afaerber@suse.de/ Which mailing list or maintainer do you think all should've gone to in addition? You're not listed anywhere in linux-next MAINTAINERS. If you want to be CC'ed, you can nicely ask me to for a v2 (and explaining why would help for the next series), or you can send patches against MAINTAINERS yourself. Copying all maintainers and lists would likely not be appreciated by the colleagues and may get mails flagged as spam. > === > Heiko's sort rules: > > compatible > reg > interrupts > [alphabetical] > status [if needed] > > === > My incomplete list: > > For nodes: > If exists on top: model, compatible and chosen. > Sort things without reg alphabetical first, > then sort the rest by reg address. > > Inside nodes: > If exists on top: compatible, reg and interrupts. > In alphabetical order the required properties. > Then in alphabetical order the other properties. > And as last things that start with '#' in alphabetical order. > Add status below all other properties for soc internal components with > any board-specifics. > Keep an empty line between properties and nodes. > > Exceptions: > Sort pinctrl-0 above pinctrl-names, so it stays in line with clock-names > and dma-names. > Sort simple-audio-card,name above other simple-audio-card properties. > Sort regulator-name above other regulator properties. > Sort regulator-min-microvolt above regulator-max-microvolt. > > === Here's a rule for you: No top-posting on kernel lists. > > Fix complete dtsi for property sort order! > Add more drivers. (cru, pinctrl) -ETONE! I don't work for Rockchip, so don't command me to add drivers for them that I have no source code for (cover letter) nor complete TRM. You're welcome that I did this service to the kernel community in my spare time... If you look up the date of Hackweek 20, you'll find that it took me two months to get this patchset binding-documented and cleaned up to this point, so by extrapolation it's unrealistic to expect much more of me here anytime soon. Rudeness certainly does not motivate. Heiko knows me - if he has any comments, he should be well capable of voicing them himself inline. I will not follow nonsensical rules that diverge from other mainline arm-soc vendors - unless I've missed some new directive from Rob or arm-soc maintainers that would apply to all. Thanks for nothing, Andreas -- SUSE Software Solutions Germany GmbH Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Felix Imendörffer HRB 36809 (AG Nürnberg)
On 17.05.21 11:21, Marc Zyngier wrote: > On Mon, 17 May 2021 00:05:45 +0100, > Andreas Färber <afaerber@suse.de> wrote: >> >> Add an initial Device Tree for Rockchip RK1808 SoC. >> Based on shipping TB-RK1808M0 DTB. >> >> Signed-off-by: Andreas Färber <afaerber@suse.de> >> --- >> arch/arm64/boot/dts/rockchip/rk1808.dtsi | 203 +++++++++++++++++++++++ >> 1 file changed, 203 insertions(+) >> create mode 100644 arch/arm64/boot/dts/rockchip/rk1808.dtsi >> >> diff --git a/arch/arm64/boot/dts/rockchip/rk1808.dtsi b/arch/arm64/boot/dts/rockchip/rk1808.dtsi >> new file mode 100644 >> index 000000000000..af2b51afda7d >> --- /dev/null >> +++ b/arch/arm64/boot/dts/rockchip/rk1808.dtsi [...] >> + gic: interrupt-controller@ff100000 { >> + compatible = "arm,gic-v3"; >> + reg = <0xff100000 0x10000>, /* GICD */ >> + <0xff140000 0xc0000>, /* GICR */ > > This is obviously wrong. You have two CPUs, and yet describe a range > that spans 6. I guess this is a copy paste from rk3399 again? Not on my part at least. As indicated, these numbers are what ships in the DTB on the RK1808 card, as per dtc -I dtb -O dts. Could be a mistake by Rockchip, of course. Are you suggesting 0xc0000/6*2 = 0x40000 for two CPUs here? Works as bad as before - investigation still ongoing with latest next. As for "obviously": The GICv3 YAML binding has no description for me to validate those numbers: "GIC Redistributors (GICR), one range per redistributor region" - says nothing about correlation to number of CPUs or size per CPU, and the examples are not explaining either: 0x200000 has no number of CPUs associated, and by my calculation 0x800000 for 32 CPUs results in 0x40000 per CPU; but then again the examples also have GICC etc. at diverging 0x2000 size. >> + <0xff300000 0x10000>, /* GICC */ >> + <0xff310000 0x10000>, /* GICH */ >> + <0xff320000 0x10000>; /* GICV */ >> + interrupt-controller; >> + #interrupt-cells = <3>; >> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges; >> + >> + gic_its: msi-controller@ff120000 { >> + compatible = "arm,gic-v3-its"; >> + reg = <0xff120000 0x20000>; >> + msi-controller; >> + #msi-cells = <1>; >> + }; > > What uses the ITS? DT-wise seemingly only the __symbols__ table (named just "its" there, I notice), so we could drop (or rename) the label if you prefer. Regards, Andreas -- SUSE Software Solutions Germany GmbH Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Felix Imendörffer HRB 36809 (AG Nürnberg)
On Mon, 24 May 2021 14:32:41 +0100, Andreas Färber <afaerber@suse.de> wrote: > > On 17.05.21 11:21, Marc Zyngier wrote: > > On Mon, 17 May 2021 00:05:45 +0100, > > Andreas Färber <afaerber@suse.de> wrote: > >> > >> Add an initial Device Tree for Rockchip RK1808 SoC. > >> Based on shipping TB-RK1808M0 DTB. > >> > >> Signed-off-by: Andreas Färber <afaerber@suse.de> > >> --- > >> arch/arm64/boot/dts/rockchip/rk1808.dtsi | 203 +++++++++++++++++++++++ > >> 1 file changed, 203 insertions(+) > >> create mode 100644 arch/arm64/boot/dts/rockchip/rk1808.dtsi > >> > >> diff --git a/arch/arm64/boot/dts/rockchip/rk1808.dtsi b/arch/arm64/boot/dts/rockchip/rk1808.dtsi > >> new file mode 100644 > >> index 000000000000..af2b51afda7d > >> --- /dev/null > >> +++ b/arch/arm64/boot/dts/rockchip/rk1808.dtsi > [...] > >> + gic: interrupt-controller@ff100000 { > >> + compatible = "arm,gic-v3"; > >> + reg = <0xff100000 0x10000>, /* GICD */ > >> + <0xff140000 0xc0000>, /* GICR */ > > > > This is obviously wrong. You have two CPUs, and yet describe a range > > that spans 6. I guess this is a copy paste from rk3399 again? > > Not on my part at least. As indicated, these numbers are what ships in > the DTB on the RK1808 card, as per dtc -I dtb -O dts. Could be a mistake > by Rockchip, of course. > > Are you suggesting 0xc0000/6*2 = 0x40000 for two CPUs here? Works > as bad as before - investigation still ongoing with latest next. > > As for "obviously": The GICv3 YAML binding has no description for me to > validate those numbers: "GIC Redistributors (GICR), one range per > redistributor region" - says nothing about correlation to number of CPUs > or size per CPU, and the examples are not explaining either: 0x200000 > has no number of CPUs associated, and by my calculation 0x800000 for 32 > CPUs results in 0x40000 per CPU; but then again the examples also have > GICC etc. at diverging 0x2000 size. The GICv3/v4 architecture spec does apply, and you should really have a look at what these sizes mean. What is the value of copy-pasting things without understanding it the first place? > > >> + <0xff300000 0x10000>, /* GICC */ > >> + <0xff310000 0x10000>, /* GICH */ > >> + <0xff320000 0x10000>; /* GICV */ > >> + interrupt-controller; > >> + #interrupt-cells = <3>; > >> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; > >> + #address-cells = <1>; > >> + #size-cells = <1>; > >> + ranges; > >> + > >> + gic_its: msi-controller@ff120000 { > >> + compatible = "arm,gic-v3-its"; > >> + reg = <0xff120000 0x20000>; > >> + msi-controller; > >> + #msi-cells = <1>; > >> + }; > > > > What uses the ITS? > > DT-wise seemingly only the __symbols__ table (named just "its" there, I > notice), so we could drop (or rename) the label if you prefer. No, I am asking *what* uses the ITS. Is it just dangling without any user? No PCI bus making use of it? M. -- Without deviation from the norm, progress is not possible.
Am Montag, 24. Mai 2021, 17:21:41 CEST schrieb Marc Zyngier: > On Mon, 24 May 2021 14:32:41 +0100, > Andreas Färber <afaerber@suse.de> wrote: > > > > On 17.05.21 11:21, Marc Zyngier wrote: > > > On Mon, 17 May 2021 00:05:45 +0100, > > > Andreas Färber <afaerber@suse.de> wrote: > > >> > > >> Add an initial Device Tree for Rockchip RK1808 SoC. > > >> Based on shipping TB-RK1808M0 DTB. > > >> > > >> Signed-off-by: Andreas Färber <afaerber@suse.de> > > >> --- > > >> arch/arm64/boot/dts/rockchip/rk1808.dtsi | 203 +++++++++++++++++++++++ > > >> 1 file changed, 203 insertions(+) > > >> create mode 100644 arch/arm64/boot/dts/rockchip/rk1808.dtsi > > >> > > >> diff --git a/arch/arm64/boot/dts/rockchip/rk1808.dtsi b/arch/arm64/boot/dts/rockchip/rk1808.dtsi > > >> new file mode 100644 > > >> index 000000000000..af2b51afda7d > > >> --- /dev/null > > >> +++ b/arch/arm64/boot/dts/rockchip/rk1808.dtsi > > [...] > > >> + gic: interrupt-controller@ff100000 { > > >> + compatible = "arm,gic-v3"; > > >> + reg = <0xff100000 0x10000>, /* GICD */ > > >> + <0xff140000 0xc0000>, /* GICR */ > > > > > > This is obviously wrong. You have two CPUs, and yet describe a range > > > that spans 6. I guess this is a copy paste from rk3399 again? > > > > Not on my part at least. As indicated, these numbers are what ships in > > the DTB on the RK1808 card, as per dtc -I dtb -O dts. Could be a mistake > > by Rockchip, of course. > > > > Are you suggesting 0xc0000/6*2 = 0x40000 for two CPUs here? Works > > as bad as before - investigation still ongoing with latest next. > > > > As for "obviously": The GICv3 YAML binding has no description for me to > > validate those numbers: "GIC Redistributors (GICR), one range per > > redistributor region" - says nothing about correlation to number of CPUs > > or size per CPU, and the examples are not explaining either: 0x200000 > > has no number of CPUs associated, and by my calculation 0x800000 for 32 > > CPUs results in 0x40000 per CPU; but then again the examples also have > > GICC etc. at diverging 0x2000 size. > > The GICv3/v4 architecture spec does apply, and you should really have > a look at what these sizes mean. What is the value of copy-pasting > things without understanding it the first place? > > > > > >> + <0xff300000 0x10000>, /* GICC */ > > >> + <0xff310000 0x10000>, /* GICH */ > > >> + <0xff320000 0x10000>; /* GICV */ > > >> + interrupt-controller; > > >> + #interrupt-cells = <3>; > > >> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; > > >> + #address-cells = <1>; > > >> + #size-cells = <1>; > > >> + ranges; > > >> + > > >> + gic_its: msi-controller@ff120000 { > > >> + compatible = "arm,gic-v3-its"; > > >> + reg = <0xff120000 0x20000>; > > >> + msi-controller; > > >> + #msi-cells = <1>; > > >> + }; > > > > > > What uses the ITS? > > > > DT-wise seemingly only the __symbols__ table (named just "its" there, I > > notice), so we could drop (or rename) the label if you prefer. > > No, I am asking *what* uses the ITS. Is it just dangling without any > user? No PCI bus making use of it? just 2ct, as far as I remember the rk1808 does have a PCIe controller. And the datasheet [0] does agree with my memory it seems Heiko [0] http://opensource.rock-chips.com/images/4/43/Rockchip_RK1808_Datasheet_V1.2_20190527.pdf
diff --git a/arch/arm64/boot/dts/rockchip/rk1808.dtsi b/arch/arm64/boot/dts/rockchip/rk1808.dtsi new file mode 100644 index 000000000000..af2b51afda7d --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk1808.dtsi @@ -0,0 +1,203 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (c) 2021 Andreas Färber + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "rockchip,rk1808"; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; + serial6 = &uart6; + serial7 = &uart7; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x0>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x1>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP>; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP: cpu-sleep { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x10000>; + entry-latency-us = <120>; + exit-latency-us = <250>; + min-residency-us = <900>; + }; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a35-pmu"; + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + arm,no-tick-in-suspend; + }; + + xin24m: xin24m { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + #clock-cells = <0>; + clock-output-names = "xin24m"; + }; + + firmware { + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + tee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + system_sram: sram@fec00000 { + compatible = "mmio-sram"; + reg = <0xfec00000 0x200000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xfec00000 0x200000>; + }; + + gic: interrupt-controller@ff100000 { + compatible = "arm,gic-v3"; + reg = <0xff100000 0x10000>, /* GICD */ + <0xff140000 0xc0000>, /* GICR */ + <0xff300000 0x10000>, /* GICC */ + <0xff310000 0x10000>, /* GICH */ + <0xff320000 0x10000>; /* GICV */ + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gic_its: msi-controller@ff120000 { + compatible = "arm,gic-v3-its"; + reg = <0xff120000 0x20000>; + msi-controller; + #msi-cells = <1>; + }; + }; + + uart0: serial@ff430000 { + compatible = "rockchip,rk1808-uart", "snps,dw-apb-uart"; + reg = <0xff430000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart1: serial@ff540000 { + compatible = "rockchip,rk1808-uart", "snps,dw-apb-uart"; + reg = <0xff540000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart2: serial@ff550000 { + compatible = "rockchip,rk1808-uart", "snps,dw-apb-uart"; + reg = <0xff550000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart3: serial@ff560000 { + compatible = "rockchip,rk1808-uart", "snps,dw-apb-uart"; + reg = <0xff560000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart4: serial@ff570000 { + compatible = "rockchip,rk1808-uart", "snps,dw-apb-uart"; + reg = <0xff570000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart5: serial@ff5a0000 { + compatible = "rockchip,rk1808-uart", "snps,dw-apb-uart"; + reg = <0xff5a0000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart6: serial@ff5b0000 { + compatible = "rockchip,rk1808-uart", "snps,dw-apb-uart"; + reg = <0xff5b0000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart7: serial@ff5c0000 { + compatible = "rockchip,rk1808-uart", "snps,dw-apb-uart"; + reg = <0xff5c0000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; +};
Add an initial Device Tree for Rockchip RK1808 SoC. Based on shipping TB-RK1808M0 DTB. Signed-off-by: Andreas Färber <afaerber@suse.de> --- arch/arm64/boot/dts/rockchip/rk1808.dtsi | 203 +++++++++++++++++++++++ 1 file changed, 203 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk1808.dtsi -- 2.31.1